Moe's COLVIN SR-1030-24 User manual

ASSEMBLY INSTRUCTIOS.
COLVIN DESK
SR-1030-24
THANK YOU FOR YOUR PURCHASE!

H
E
G
TAB
F
F
H
H
F
H
F
PARTS AND HARDWARE .
PARTS LIST
No. DESCRIPTIO
N IMAGE QTY
A METAL
FRAME 2
BBODY 1
CBOTTOM
RAIL 1
D BACK RAIL 2
HARDWARE LIST
No. DESCRIPTION IMAGE QTY
EBOLT M6, 22MM 4
FBOLT M6, 15MM 2
GBOLT M6, 10MM 12
H ALLEN KEY 4MM 1
NOTES.
Thank you for purchasing this quality product! Be
sure to check all packing material carefully for
small part that may have come loose inside the
carton during shipping.
CAUTION: The item is heavy,
assembly should be performed by two
people.
STEP 1
.
Align Tabs of Metal Frame (A) onto Slots of the Frame which is attached with the Bottom of the
Desk Frame (B) as shown below in diagram, Insert Allen Bolt (F) and tighten with Allen Key (H). &
also align the Metal Clip on the Metal with the Fasteners Inserted into the Desk Bottom Frame (B)
Now, Insert Allen Bolt (E), and tighten with Allen Key (H). Repeat the same process to secure
other end. Do not tighten Allen Bolts fully.
STEP 2 .
Align Tabs of Metal Bottom Rail (C) onto Slots on Metal frame assembly (A) on both ends as
shown below in diagram. Insert Allen Bolt (F) and tighten with Allen Key (H). Repeat the same
process on other end. Now fully tighten all Connections. Now, align the tabs of Back Rail (D) with
the frame attached to the bottom of the Desk, and with the Bottom Rail (C) as shown in below fig.
Insert Allen Bolt (F) and Tighten with Allen Key (H). Once all connections are fully tighten, Turn
the table in upright position. Product is ready to use.