Moe's VE 1001-03 User manual

© Metal bar, 1x
ASSEMBLY INSTRUCTIONS
Before beginning:
º Unpack all parts and hardware to ensure you have all needed components for assembly.
º Read this guide cover to cover before beginning assembly.
º Have 2 adults on hand for assembly.
º Assemble on a padded, non-marring surface.
º Save all packaging until finish.
Components:
(A) Top, 1x (B) Leg, 2x
(D) Hex Bolt large, 6x (F) Washer 6x (G) Spanner 1x
Hardware and tools:
Assembly steps
Step 1:
Lay the Top (A) on a soft surface, with the insert nuts facing up. Place the table Legs (B) making
them match with the nuts as shown in the image.
Insert Nuts
BENT DINING TABLE SMALL SMOKED
VE 1001-03
BENT COUNTER TABLE SMOKED
VE-1039-03
(E) Hex Bolt small, 2x

Step 3: Turn the table on its upright position & attach the metal bar Horizontally as shown in the
Image using Bolts (E) and Spanner (G) provided.
Step 4:
Adjust the levellers
under the legs if needed.
Levellers
Assembly complete.
Step 2: Attach the legs using the Bolts (D), Washer (F) and Spanner (G) provided.
Care Instructions:
º Do not clean furniture with harsh cleansers or polish.
º Do not put hot items directly on furniture surface.
º Do not put furniture in direct sunlight.
º Not for commercial use. For residential use only.
º Dust and pick up spills with a clean, non-colored, lint-free cloth.
º Stains may be removed with mild soap and damp cloth.
Thank you!