Moe's TUBRON SR-1019-24 User manual




 
TUBRONCONSOLETABLE
SR‐1019‐24
AssemblyInstructions







Component List:
(A) Metal Frame Leg,2x


(B) Metal Back Rail,2x


(C) Console Top, 1x

Tools List:
(D) Allen Bolt M8,
18mm, 20x
(E) Washer 18 mm,
20x
(F) Allen Key
5mm, 1x
(G) Hex bolt
12-13mm,4x



(H) Spanner,
12-13mm,1x
Before beginning:

 Unpack all parts and hardware to ensure you have all needed components for assembly.
 Read this guide cover to cover before beginning assembly.
 Have 2 adults on hand for assembly.
 Assemble on a padded, non-marring surface.
 Save all packaging until finish.

ASSEMBLY STEPS -

Step 1: Align Tabs of Metal Frame (A) With the Fasteners inserted into Bottom of the Desk Top (C) as
shown below in diagram, Insert Allen Bolt (D), Washer (E), and tighten with Allen Key (F). Repeat the
same process to secure other end. Do not tighten Allen Bolts fully.


Step 2: Now, align Tabs of Metal Back Rail (B) onto Slots on Metal frame assembly on both ends as
shown below in diagram. Insert Allen Bolt (D), Washer (E), & place the Hex bolt (G) from back of the
hole in the frame, grab the hex bolt by the spanner (H) & tighten with Allen Key (F). Repeat the same
process on other end. Now fully tighten all Connections.


Care:
Do not clean furniture with harsh clensers or polish.
Do not put hot items directly on furnitue surface.
Do not put furniture in direct sunlight.
Not for commercial use. For residentiual use only.
Dust and pick up spills with a clean, non-colored, lint-free cloth.
Stains may be removed with mild soap and damp cloth.
Thank you!
Step 4: Product is ready to use.

 
ASSEMBLED VIEW
Step 3: Once all connections are fully tighten, Turn the table in upright position.
