Moe's BX-1034-24 User manual

ZANE BENCH LARGE
BX-1034-24
Assembly Instructions
Unpack all parts and hardware to ensure you have all needed components for assembly.
Read this guide cover to cover before beginning assembly.
Have 2 adults on hand for assembly.
Assembly on a padded, non-marring surface.
Save all packaging until finish.
Before beginnig
Tools List :
(D1) BOLT (F) WASHER (H) NUT SPANNER
Component List :
(A) (C)
(E) HEXAGON NUT
(B)
(G) NUT SPANNER
(SMALL)
(D2) BOLT

ASSEMBLY STEPS -
Step 2 : METAL ROD(B) Insert Bolt (D2),With hexagon Nut (E) With Washer (F) & tighten with
SPANNER (H). Repeat the same process to secure other end. Do not tighten Allen Bolts fully.
Step 1: Align Tabs of Metal Legs (C) With the Nut Bolt of the Bench top (A) as shown below in
diagram, Insert Bolt (D1),With hexagon Nut (E) With Washer (F) & tighten with SPANNER (G).
Repeat the same process to secure other end. Do not tighten Allen Bolts fully.

Thank you !
Step 4 : Product is ready to use.
ASSEMBLLED VIEW
Step 3 : Once all connections are fully tighten, Turn the table in upright position.
Care:
Do not clean furniture with harsh clensers or polish.
Do not put hot items directly on furnitue surface.
Do not put furniture in direct sunlight.
Dust and pick up spills with a clean, non-colored, lint-free cloth.
Stains may be removed with damp cloth.