Moen CAMELOT 22245 User manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 12/10
SINK DESCRIPTION
•Manufactured of 20 gauge stainless steel
•The large bowl is a minimum of 12" x 190" x 5-1/2"
•The sink ledge has two fixture mounting holes,
1-1/4" in diameter and 4" on center
•Includes 4904 bar faucet with a 2.2 GPM flow rate
•Has one 2” diameter SEALTITE recessed drain
•Soundshield undercoating maximizes sound
deadening and inhibits condensation
•Made in U.S.A.
•Includes all necessary mounting hardware
CUT OUT DIMENSIONS
•Cut out dimensions are 12-1/2" x 16-5/8", with a
5/16" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
•Third party certified to ASME A112.19.3 and all applicable
specifications referenced therein
•Suitable for ADA compliant installation
WARRANTY
•Warranted for ten years against material or
manufacturing defects
CAMELOT®
Single Bowl Drop-In Sink with Faucet
Model: 22245
(K-1317-2-WF)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
6"
(152mm)
2-5/8" R.
TYP.
2"
(51mm)
1-1/4" DIA. TYP.
13"
(330mm)
WIDTH
5"
(127mm)
10"(254mm)
BOWL
5-1/2"
(165mm)
17-1/8"
(435mm)
LENGTH
1-1/2"
(38mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
SEALTITE DRAIN
ASSEMBLY WITH
DROP IN BASKET
3-5/8"
(92mm)
12"
(304mm)
2"SEALTITE
DRAIN
5/16" R.
TYP.
Installation Detail
ADA
There is more than 1 version of this model.
Page down to identify the version you have.

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 10/10
SINK DESCRIPTION
•Manufactured of 20 gauge stainless steel
•The large bowl is a minimum of 12" x 190" x 5-1/2"
•The sink ledge has two fixture mounting holes,
1-1/4" in diameter and 4" on center
•Includes 4904 bar faucet with a 2.2 GPM flow rate
•Has one 2” diameter SEALTITE recessed drain
•Soundshield undercoating maximizes sound
deadening and inhibits condensation
•Made in U.S.A.
•Includes all necessary mounting hardware
CUT OUT DIMENSIONS
•Cut out dimensions are 12-1/2" x 16-5/8", with a
5/16" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
•Third party certified to ASME A112.19.3 and all applicable
specifications referenced therein
•Suitable for ADA compliant installation
WARRANTY
•Warranted for ten years against material or
manufacturing defects
CAMELOT®
Single Bowl Drop-In Sink with Faucet
Model: 22245
(K-1317-2-WF)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
6"
(152mm)
2-5/8" R.
TYP.
2"
(51mm) 1-1/4" DIA. TYP.
13"
(330mm)
WIDTH
5"
(127mm)
10"(254mm)
BOWL
5-1/2"
(165mm)
17-1/8"
(435mm)
LENGTH
1-1/2"
(38mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
SEALTITE DRAIN
ASSEMBLY WITH
DROP IN BASKET
3-5/8"
(92mm)
12"
(304mm)
2"SEALTITE
DRAIN
5/16" R.
TYP.
Installation Detail
ADA