Moen EXTENSA 7560 series User manual

CRITICAL DIMENSIONS
(D N T SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Flush button with raised stream and spray in di ca tors
• Pullout spray with 59" fiber hose
• Flexible supplies with 3/8” compression fittings
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Spout receptor rotation is 120˚
• perates with less than 5 lbs. of force
• perates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to IAPM Green, ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9
• Meets CalGreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
• The backflow protection system in this device consists of two
independently operating check valves, a primary and a secondary which
prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
2-1/2"(64mm)2-1/8"(54mm)
1-1/4"(32mm)Dia.
Minimum
MountingHole
8"
(203mm)
10-1/2"
(265mm)
DeckEscutcheon
10-7/16"x2-7/16"wide
(265mmx62mm)
10-1/2"
(266mm)
10-3/4"
(273mm)
2-3/8"(60mm)
EscutcheonDia.
Max.DeckThickness
SingleMountEsc.
Max.DeckThickness
DeckEsc.
28-1/2"
(724mm)
2-1/2"(64mm)2-1/8"(54mm)
1-1/4"(32mm) Dia.
Minimum
Mounting Hole
8"
(203mm)
10-1/2"
(265mm)
Deck Escutcheon
10-7/16" x 2-7/16" wide
(265mm x 62mm)
10-1/2"
(266mm)
10-3/4"
(273mm)
2-3/8" (60mm)
Escutcheon Dia.
Max. Deck Thickness
Single Mount Esc.
Max. Deck Thickness
Deck Esc.
28-1/2"
(724mm)
Rev. 9/11
NOTE: DESIGNED T INSTALL
THRU 1 R 3 H LES 1-1/2” (38mm) MIN. DIA.
Extensa®
Single Control Kitc en Faucet
w/Pullout Spray
Models: 7560 series
There is more than 1 version of this model.
Page down to identify the version you have.

CRITICAL DIMENSIONS
(D N T SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Flush button with raised stream and spray in di ca tors
• Pullout spray with 59" fiber hose
• 1/2” IPS connections will accept standard ball nose connection for 3/8”tubing
• Chrome liquid dispenser included with 87560CSD
OPERATION
• Lever style handle
• Temperature controlled by 180˚ arc of handle travel
• Spout receptor rotation is 120˚
• perates with less than 5 lbs. of force
• perates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1225 cartridge design
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Designed and manufactured to comply with the requirements of:
CSA B-125.1, ASME A112.18.1, IAPM PS 49-92, NSF 61 Section 9,
California Proposition 65, ICC A117.1
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
For8"(203mm)
Mounting
2-1/2"(64mm)
Max.DeckThickness
SingleMountEsc.
2-1/8"(54mm)
Max.DeckThickness
DeckEsc.
1-1/4"(32mm)Dia.
Minimum
MountingHole
3/8"(10mm)
SupplyTubes
1/2"IPS
Connection
16"
(406mm)
8"
(203mm)
10-1/2"
(265mm)
Cold
Hot
Flexible
MetalHose
CounterWeight
DeckEscutcheon
10-7/16"x2-7/16"wide
(265mmx62mm)
3Hole,4"o.c.Installation
SingleHoleInstallation
1/4"(6mm)
ThreadedDia.
18NPSM
10-1/2"
(266mm)
10-3/4"
(273mm)
2-3/8"(60mm)
EscutcheonDia.
9-7/8"
(250mm)
2-5/8"
(66mm)
3-5/16"
(83mm)
2"
(50mm)
For 8"(203mm)
Mounting
2-1/2"(64mm)
Max. Deck Thickness
Single Mount Esc.
2-1/8"(54mm)
Max. Deck Thickness
Deck Esc.
1-1/4"(32mm) Dia.
Minimum
Mounting Hole
3/8" (10mm)
Supply Tubes
1/2" IPS
Connection
16"
(406mm)
8"
(203mm)
10-1/2"
(265mm)
Cold
Hot
Flexible
Metal Hose
Counter Weight
Deck Escutcheon
10-7/16" x 2-7/16" wide
(265mm x 62mm)
3 Hole, 4" o.c. Installation
Single Hole Installation
1/4" (6mm)
Threaded Dia.
18 NPSM
10-1/2"
(266mm)
10-3/4"
(273mm)
2-3/8" (60mm)
Escutcheon Dia.
9-7/8"
(250mm)
2-5/8"
(66mm)
3-5/16"
(83mm)
2"
(50mm)
Rev. 9/10
Extensa®
Single Control Kitc en Faucet
w/Pullout Spray
Models: 7560 series
87560 series
DISCONTINUED MODELS: 7560, 7560CS,
7560CBL, 87560C, 87560S, 87560SLBL, 87560CS,
87560CBL, 87560
NOTE: DESIGNED T INSTALL
THRU 1 R 3 H LES 1-1/4” (32mm) DIA.