Moen VILLETA L4721 Series User manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
•Chrome plated metal construction with various finishes
identified by suffix
•1/2" IPS connections
OPERATION
•Pivot action lever style handle
•Temperature controlled through 180˚ degree arc
of handle travel
FLOW
•Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
•1225 cartridge design
•Nonmetallic/nonferrous and stainless steel material
•Can accommodate reversed piping and back to back
installations
STANDARDS
•Third party certified to WaterSense,® CSA B-125.1/ASME
A112.18.1, ICC A117.1 and all applicable requirements
referenced therein
•Certified to ANSI/NSF 61/9
•Complies with California Proposition 65 and with
the Federal Safe Water Drinking Act
•ADA for lever handle
WARRANTY
•Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
•5 year warranty if used in commercial installations
2-13/16"
2-3/8"
(60mm)
5"
(127mm)
7"
(178mm)
3-5/8"
(92mm)
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
LIFT
ROD
1-3/4"
(45mm)
MAX.
2"
(25mm)
1/2" IPS
ADAPTER
2"
(25mm)
TOP OF
MOUNTING
SURFACE
6" (152mm)
(ESCUTCHEON WIDTH
VILLETA™
Single-Handle Lavatory Faucet
With Metal Waste Assembly
Models: L4721 series, L4725 series
Bulk Pack (12 per carton)
Model: L64721 series, L64725 series
With 50/50 Waste Assembly
Model: L84721 series
Bulk Pack (12 per carton)
Models: L64751 series, L64755 series
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 4" ON CENTER
Rev. 7/08