MOIXA Smart Battery User manual

Step 1: Installation Stage
Tools Required:
Clamp Meter
Drill
Smart Phone
or laptop
2.5 mm hex drive
Part 1
Using the template
provided, x Moixa
securely to the wall
Part 2
Connect batteries
and click in place
50MM
MINIMUM
Moixa®Smart Battery
Quick Installation Guide
DD

service
block
MCS AC PV
system (rooftop)
string
inverter
consumer unit
meter
current
clamps
Consumption 1
Consumption 2
PV inverter
TPlink
TPlink
broadband
router
Step 2: Conguring clamp meters
‘Y Clamp Conguration’ - PV included in consumption
‘Single Clamp Conguration’ - PV and consumption separated
service
block
consumer unit
meter
current
clamps
PV inverter
MCS AC PV
system (rooftop)
string
inverter
Consumption 1
isolator
ethernet
cable
TPlink
TPlink
broadband
router

Y Clamps Ensure the
clamp’s jaw is eective-
ly closed & clamps not
touching
Remove dongle
Place into plastic bag
Use slot to run cable
(right) Ethernet
direct cable
Step 3:
Data connection
method
Option 1A Ethernet
Direct cable
Option 1B Via Power line
communication (TPlink)
Option 2 WiFi
Ethernet: For ethernet
connections to broadband
the Wi dongle should be
removed from the Pi and
put in the labeled plastic
bag and secured it safely
inside the unit:
ethernet
cable
broadband
router
isolator

consumer unit
current
clamps
Consumption 1
PV inverter
isolator ethernet
cable
TPlink
TPlink
broadband
router
WiFi:
i. Using your smartphone, search for Moixa’s network:
“Maslow-serialnumber”
ii. Password: MaslowPass
iii. Open your browser, go to: http://10.74.8.254
iv. Input customer’s network ID and password
v. Click “set”
Step 4: Commissioning
a. Submit the “Moixa: Standard Installation Form” using the Moixa APP
b. Ensure the unit is online
c. Call Moixa to verify the installation
d. Complete customer handover procedure
Call Moixa: 0207 734 1511
N.B. The TP link adaptors
may need to be paired,
if the lights are not
ashing on both units
then push buttons.
[email protected]
www.moixa.com
DC READY®, MOIXA®are registered trademarks, logos, illustrations are property of
Moixa Energy Holdings Ltd. Registered in England and Wales. © Moixa Technology Ltd 2016.
Ethernet via TP link
TPlink next to the rout-
er use the through plug,
and direct into wall
socket - reduce chance
of TP-link be unplugged