Molpir MM10107H User manual

User manual
Monitor 10,1” motorized roof mount; small
base; HDMI input; 12/24 V
Ord. code: MM10107H
Date:
29
/0
6/
2018
NU_
MM10107H
_
00
1
_2
9
062018_EN
Page 1 /
3

Remote control:
Quick start (Power Trigger Mode)
1. ser connects all cables in the following line: RED: +ACC (12~30V); BLACK: GND
2. ACC is linked to POWER TRIGGER and turns ON the monitor.
3. In the option MEN / F NCTION / TRIGGER MODE you can choose the POWER mode function.
4. If the Yellow cable ACC is disconnected and TRIGGER MODE is in POWER, the monitor will turn OFF.
Quick start (Video Trigger Mode)
1. ser connects all cables in the following line: RED: +ACC (12~30V); BLACK: GND
2. Monitor turns ON automatically if a VIDEO signal is detected.
3. In the option MEN / F NCTION / TRIGGER MODE you can choose the VIDEO mode function.
4. In there is no VIDEO INP T, the monitor will turn OFF automatically.
➊ P ON / OFF
➋ MEN ENTER (select)
➌ P / DOWN menu select / adjust
➍ N MBER disabled
➎ M disabled
➏ DIM disabled
➐ L angle adjust "minus"
➑ H angle adjust "plus"
➒ AV switch video mode
➓ A TO menu ON / OFF
Date:
29
/0
6/
2018
NU_
MM10107H
_
00
1
_2
9
062018_EN
Page
2
/
3

Picture Mode:
se to choose the display mode.
Color Temperature:
se to choose the color tone.
Aspect:
se to control the screen size.
Noise Reduction:
se to adjust the strength of noise reduction.
Screen:
se to adjust VGA screen.
Input:
se to choose the video source.
Trigger:
se to choose Trigger mode (power / video).
Opening Zone:
se to choose opening angle.
Restore Factory:
se to initialize system.
Blending:
se to adjust the transparency of menu.
Osd uration:
se to adjust menu display time.
Software Update (USB):
SB to upgrade system.
Date:
29
/0
6/
2018
NU_
MM10107H
_
00
1
_2
9
062018_EN
Page
3
/
3