Molpir MM23001VH User manual

User manual
Monitor 23" TFT LCD 9-30V; 1680x1050;
aluminium frame; V A; HDMI
Ord. code: MM23001VH
Date:
29
/0
6/
2018
NU_
MM
2
3
001
VH
_
00
0
_2
9
062018_EN
Page 1 /
4
3

Remote control:
Quick start (Power Tri er Mode)
1. User connects all cables in the followin line: RED: +ACC (12~30V); BLACK: GND
2. ACC is linked to POWER TRIGGER and turns ON the monitor.
3. In the option MENU / FUNCTION / TRIGGER MODE you can choose the POWER mode function.
4. If the Yellow cable ACC is disconnected and TRIGGER MODE is in POWER, the monitor will turn OFF.
Quick start (Video Tri er Mode)
1. User connects all cables in the followin line: RED: +ACC (12~30V); BLACK: GND
2. Monitor turns ON automatically if a VIDEO si nal is detected.
3. In the option MENU / FUNCTION / TRIGGER MODE you can choose the VIDEO mode function.
4. In there is no VIDEO INPUT, the monitor will turn OFF automatically.
➊ P ON / OFF
➋ MENU ON / OFF
➌ UP / DOWN menu select / adjust
➍ NUMBER disabled
➎ M disabled
➏ DIM disabled
➐ L disabled
➑ H disabled
➒ AV switch video mode
➓ AUTO ENTER (select)
Date:
29
/0
6/
2018
NU_
MM23001VH
_
00
0
_2
9
062018_EN
Page
2
/
4

PIN 9 of VGA connector is 5V. VGA si nal will have priority over other si nal Inputs.
Picture Mode:
Use to choose the display mode.
Color Temperature:
Use to choose the color tone.
Aspect:
Use to control the screen size.
Noise Reduction:
Use to adjust the stren th of noise reduction.
Screen:
Use to adjust VGA screen.
Input:
Use to choose the video source.
Screen:
Use to choose the flip mode (normal / v-flip).
Trigger mode:
Use to choose the tri er mode (power / video).
Date:
29
/0
6/
2018
NU_
MM23001VH
_
00
0
_2
9
062018_EN
Page
3
/
4

Restore Factory:
Use to initialize system.
Blending:
Use to adjust the transparency of menu.
OsdDuration:
Use to adjust menu display time.
So tware Update (USB):
USB to up rade system.
Date:
29
/0
6/
2018
NU_
MM23001VH
_
00
0
_2
9
062018_EN
Page
4
/
4