Molpir MM20001 User manual

User manual
20” Monitor TFT LCD; AV / HDMI / VGA Input;
polycarbonate, I front
Ord. code: MM20001
Date:
29
/0
6/
2018
NU_
MM
20001
_
00
0
_2
9
062018_EN
Page 1 /
4
3

Remote control:
Quick start (Power Trigger Mode)
1. User connects all ca les in the following line: RED: +ACC (12~30V); BLACK: GND
2. ACC is linked to POWER TRIGGER and turns ON the monitor.
3. In the option MENU / FUNCTION / TRIGGER MODE you can choose the POWER mode function.
4. If the Yellow ca le ACC is disconnected and TRIGGER MODE is in POWER, the monitor will turn OFF.
Quick start (Video Trigger Mode)
1. User connects all ca les in following line: RED: +ACC (12~30V); BLACK: GND
2. Monitor turns ON automatically if a VIDEO signal is detected.
3. In the option MENU / FUNCTION / TRIGGER MODE you can choose the VIDEO mode function.
4. In there is no VIDEO INPUT, the monitor will turn OFF automatically.
➊ P ON / OFF
➋ MENU ON / OFF
➌ UP / DOWN menu select / adjust
➍ NUMBER disa led
➎ M disa led
➏ DIM disa led
➐ L disa led
➑ H disa led
➒ AV switch video mode
➓ AUTO ENTER (select)
Date:
29
/0
6/
2018
NU_
MM
20001
_
00
0
_2
9
062018_EN
Page
2
/
4

PIN 9 of VGA connector is 5V. VGA signal will have priority over other signal Inputs.
Picture Mode:
Use to choose the display mode.
Color Temperature:
Use to choose the color tone.
Aspect:
Use to control the screen size.
Noise Reduction:
Use to adjust the strength of noise reduction.
Screen:
Use to adjust VGA screen.
Input:
Use to choose the video source.
Screen:
Use to choose the flip mode (normal / v-flip).
Trigger mode:
Use to choose the trigger mode (power / video).
Date:
29
/0
6/
2018
NU_
MM20001
_
00
0
_2
9
062018_EN
Page
3
/
4

Restore Factory:
Use to initialize system.
Blending:
Use to adjust the transparency of menu.
OsdDuration:
Use to adjust menu display time.
So tware Update (USB):
USB to upgrade system.
Date:
29
/0
6/
2018
NU_
MM
20001
_
00
0
_2
9
062018_EN
Page
4
/
4