
www.nasoneb.com 1 (800) 833-9653
After your Treatment For more information,scan the
QR code to access the website
1 - DISASSEMBLE 2 - CLEAN THE CUP
3 - WIPE DOWN THE SYSTEM 4 - DRY THE TUBING
Easy to Clean
Disassemble the system and
disconnect the cup from the
tubing.
Clean the cup using warm,
soapy water, and set aside or
wrap in a clean cloth to dry.
Use a towel to wipe the
compressor dry.
To remove moisture from the
tubing, plug it into the
compressor and let the
system run until tubing is dry.
Check the Air filter
Changing your compressor filter every 6 months, along with
your nebulizer cup and tubing, is key to ensuring your system is
working in top condition.Additional filters can be purchased as
part of our Supply Kits on Amazon or nasoneb.com.
15571-01, ART-0324-01
NasoNeb and NasoNeb Logo are registered trademarks of
Monaghan Medical Corporation.
©2007, 2023 Monaghan Medical Corporation, All rights reserved.
�Read all warnings and complete instructions before use.
�Do not use with medications that are incompatible with
polycarbonate.
�Each NasoNeb® Nebulizer Cup and Tubing is designed for
single person use as sharing risks the spread of infection.
Additional Cups and Tubing Kits can be purchased at
nasoneb.com for use with a shared compressor.
CAUTIONS / WARNINGS
nasoneb.com/warranty
Warranty Registration
nasoneb.com/ifu
Instructions for Use
nasoneb.com/how-to-use
How to Use