Monessen Hearth Vent Free Insert DIS33G Installation instructions

PRODUCT SPECIFICATIONS
DIS33G Vent Free Insert
To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable
building or fire codes.Contact local building or fire officials about restrictions and installation inspection requirements.All photographs and drawings on this brochure are for illustrative purposes only and are not intended
for, nor should they be used as a substitute for the instructions packaged with the unit.Appearance and specifications of the product are subject to change without notice.© 2007 Monessen Hearth Systems Co.
A Brand of Monessen Hearth Systems Co.
149 Cleveland Drive, Paris, Kentucky 40361
www.monessenhearth.com
INTERIOR DIMENSIONS
Front opening width: 27"
Front opening height: 14-1/2"
Rear wall width:21"
Firebox depth: 13"
TECHNICAL INFORMATION
Max. BTU Input: 28,000 BTU/HR
Ignition System: Standing Pilot
Gas Type: Natural or LP
Controls: Thermostat or Millivolt
Clearance to Fireplace: Zero
CSA Design Certified
FIELD INSTALLED ACCESSORIES
Louvers: Polished Brass
Black Small Face Plate (33" H x 43" W): Includes Brass Trim
Black Large Face Plate (36" H x 50" W): Includes Brass Trim
Volcanic Rock
Ceramic Fiber Cinders
AmbientTechnologies™Remote Controls and Thermostats
HPBA
Hearth, Patio & Barbecue Association
MADE IN U.S.A.