Moni A502G User manual

Baby High Chair
Model：A502G
Please use non-toxic, non abrasive detergent to
clean your chbaby chair. Mix water into a small
amount of non-toxic detergent to conbine a mild
solution. Wipe the frame with a wet cloth. Do not
use detergent or solution directly.
If you need to leave the high chair idle for a period
of time, do not store it in a humid or high
temperature environment, or it will easily lead to
rust and aging of parts. Make the air flow around
the seat, and do not stack anything on the seat. In
order to avoid affecting the service life of the
product or causing danger.
Regularly check for loose screws, damaged parts or
broken stitches. If the parts are damaged, please
stop using.
When assembling and disassembling, please
operate carefully according to the operation manual
to avoid unnecessary damage
CARE AND MAINTENANCE
•
•
•
•

12
. Seat adjustment
button
3. tray cover
4. Detachable tray
5. Remove button
from tray
6. folding button
. PU fabric seat . Quick release button
for seat and frame
8. Seat height adjustment
button
9. Pedal Angle adjustment
button
10. footrest adjustment button
11. tray hook
12. rear wheel
7
1
PARTS PARTS
1.frame
3.tray
2
2.seat
1
2
1
2
3
4
5
6
8
9
7
10
11

•
•
•
•
•
•
•
•
•
•
•
•
•
•
Please read this instruction manual carefully before
using the high chair and save it for future reference.
Do not leave children unattended.
This high chair is suitable for children from 6 to 36
months. Do not use for children over 3 years old or
weighing more than 15kg
Do not use the high chair when any element is
broken, torn or missing.
Make sure that all users are familiar with the
operation method of the product, and that the
product can be opened and folded easily. If not,
please do not force operation. Please read the
manual carefully and use the correct method.
Before use, please check that all parts are installed
and adjusted correctly， check the locking
mechanism is fully engaged and properly adjusted.
Children must use safety belt when using the high
chair in order to prevent the baby from falling or
sliding out from the dining chair, causing serious
injury.
Please do not use this product when your baby
cannot sit up independently。
When your baby is in the dining chair, do not
remove any part of the chair or adjust any part of
the chair.
Do not leave your baby climb, play or hang on the
high chair alone.
Make sure the high chair is on a flat and stable floor.
At the same time, please do not place heavy articles on
the dining plate to prevent the chair from turning over。
Avoid placing the dining chair near the heat source,
such as electric heater, gas heater, etc., or any place
where the baby can contact dangerous goods。
Do not use any accessories not provided by the
manufacturer
To avoid danger of suffocation, remove the plastic
packings before using this products.
Do not remove the high chair with baby in it.
The limit time for children to ride in the dining chair
shall not exceed 2 hours.
43
WARNING
• •

USE Instructions
/ Assemble high chair /
1.Installation method of dining chair: After unrolling the
dining chair, insert the dining chair seat (3) in the direction
of the arrow (4) until the sound of the card chorus is heard,
and then reverse pull to confirm whether it has been locked.
2.Disassembly method of high chair: press the quick
disassembly button under the armrest on both sides of the
chair at the same time, then lift the seat and separate it
from the frame.
Quick release button
for seat and frame
3
4
5
5 6
USE Instructions
/ open the high chair /
1.Take the product out of the packing box, open the other
parts and wait for installation, adjust the platform to the
state as shown in the picture, and get ready for installation.
2. Press and hold the white stop buttons on both sides of
the platform. At the same time, press the direction as
shown in the figure to expand the front and rear pins of
the frame to the maximum state.
1
2
folding button
2
1

USE Instructions USE Instructions
1.First press the adjustment button at the bottom of the tray,
then pull the adjustment handle, slightly pull the plate outward,
release the handle and continue to pull. When a "click" sound
is heard, it proves that the tray is stuck in the second position;
2.Conversely, press the adjustment button (1) and pull the
adjustment handle (2). Reverse adjustment will bring the
tray back to first gear.
3.Traycan be adjusted in two gears.
/ Adjust the tray /
2
1
tray adjust handle
7 8
1.tray installation: Press the adjustment button at the bottom
of the plate (1), then pull the adjustment handle (2) outward,
and insert the installation pipe fitting on the tray at the same
time to the hole on the armrest. After insertion to the bottom,
loosen the tray handle and pull back to confirm whether the
tray is installed position.
2.Disassembly of the tray: Press the adjustment button at the
bottom of the tray (1) and pull the adjustment handle (2) at
the bottom outwardly to pull the plate out of the seat, and
the disassembly is completed.
/ Assemble the tray and removal /
2
1

USE Instructions USE Instructions
9 10
1.Seat height upward adjustment： press and hold the height
adjustment button on both sides of the seat and apply force
upward along the front foot expansion tube to raise the seat.
2.Seat height reduction adjustment: Press the seat height
adjustment button on both sides of the seat and apply force
downward along the front foot expansion tube to lower the seat.
3.The seat height can be adjusted for 6 gears. When the seat
is adjusted to the bottom, it will not be set as a gear.
Children are prohibited to use it in this state.This state is only
applicable to retracting the high chair
/ Seat height adjustment /
Seat height adjustment button
1
1
WARNING:
Do not lower the seat to the lowest state.
The lowest state is only suitable for on-off use.
√

USE Instructions USE Instructions
11
1.Hold the back of the seat against the back Angle
adjustment button and apply force in the forward or
backward direction to adjust the back Angle according
to the need.
2.Back can be adjusted for five gears.
/ Seat back Angle adjustment /
12
3
4
5
Adjust the button by the Angle
按住
12
/ Use of seat belts /
1.Fasten the buckle on the upper side of the seat belt buckle
with the insert, and then insert the combined insert into the
central female buckle of the seat belt buckle.
2.To unfasten the seat belt buckle, just press the button in the
middle of the seat belt center mother buckle to open the seat
belt buckle.
3.Adjustment of safety webbing: hold one end of the safety
webbing and slide the daily buckle up and down to adjust
the length of the webbing.
open
fasten
press

USE Instructions USE Instructions
13
/ Open and fold /
1.First press the seat height adjustment button on both sides
and push the seat down to the lowest position.Before closing,
the plate can be disassembled and hung on the rear foot tube
to reduce the volume.Then press and hold the car buttons on
both sides of the dining chair, while the front and rear foot
tube inwards.Complete the assembly of dining chairs.
1
2
3
5 5
4
6
14
/ The use of booster /
1.First remove the children's dinner plate as shown in figure,
then remove the child seat from the frame, fold the seat leg
backward as shown in figure, and then put the seat on the
adult dining chair with the woven belt firmly bound, tie,
fasten and tighten until it is closed.
2
1
1
2
4
5
3