TikkTokk Little Boss User manual

Little Boss
High Chair
Important! Read carefully and keep for future reference
Maximum occupant weight of 15kg
ISSUE: A

Page 1
Seat *1
Crotch *1
Foot pad *4
Stool *1
Foot rest *1
Wooden leg *4
Screwdriver *1
Place mat *1
Safety belt *1
Link span *3
(long *1: short *2
Screw *10
Lower plate *1
Leather sheath *1
Safety lock *2
What You’ll Find In The Box!

Page 2
To secure your child in the harness push the buckle tongues (A) into buckle
housing (B) and adjust with the waist strap adjuster so that the waist strap
is firmly secured around the child. Adjust the crotch strap firmly using crotch
strap adjuster. Place shoulder straps in position on buckle tongues (A) and
adjust so that they are firm and comfortable on the child.
Buckle Use
End Clip
Shoulder Strap
Adjuster
Shoulder Strap
Clip
Buckle
Housing (B)
End Clip
End Clip
Clips
Waist Strap
Waist Strap
Adjuster
Crotch Strap
Adjuster
Crotch Strap
Buckle
Tongue (A)

Page 3
Installation Method
Step 1
Before installing the high chair, we first distinguish
the installation sequence of the wooden legs. The
front foot with two symmetrical holes in the middle
of the wooden legs is used to install the foot pedal
and connecting frame.
Step 3
Align the wooden legs with the plastic frame and
tighten using the screws provided.
Step 2
Install the connecting frame to the legs, fit the
rear metal support first followed by the left & right
supports. The foot support can then be installed.
Step 4
Place the plastic seat section onto the plastic base
and lock in using the 2 x Safety Locks provided

Page 4
Installation Method
Step 5
Screw the 4 x foot pads onto each leg ensuring that
the pads are rotated to ensure that they are flush
with the floor.
Step 6
Place the highchair cover over the shell, ensuring the
buckle is threaded through the hole provided.
Step 7
Slide the highchair tray onto the seat shell by
pressing both the left and right buttons on the
underside of the tray simultaneously.
High Chair to Low Chair
Remove the lower section of the timber legs to
convert to low chair mode.

Page 5
Cleaning & Maintenance
Recommendations
Please regularly check the fastening of screws, nuts and other parts of the
high chair. The connecting frame and foot pedal play a role in strengthening
stability and cannot be easily removed to avoid danger to children.
In order to prolong the service life of the high chair, use warm water or a
small amount of cleaning agent, wipe the surface with a wet cloth, and do
not use corrosive cleaners to avoid damaging the high chair. Please put the
high chair in a ventilated place to avoid direct sunlight.

Page 6
WARNINGS
• Follow the manufacturer’s instructions.
• Do not leave children unattended.
• The harness must always be used and correctly fitted - most injuries
from high chairs are caused by falls.
• Position the high chair away from solid structures and benches to avoid
injuries caused by falls and by access to dangerous items.
• Use high chair on a flat, even and horizontal floor.
• Do not elevate the high chair on any structure or table.
• To be assembled by a competent adult only.
• Keep children away from product during assembly.
• Check over the high chair before placing child into high chair.
• The weight of the child using this product is not to exceed 15kg.
• Always keep your child in view whilst using the high chair,
• Do not allow children to stand on the product.
• Use on a flat, even and horizontal floor and never use near stairs.
• Do not elevate the high chair on any structure or table.
• Never carry the high chair with the child in it.
• Do not use the high chair without the tray and always ensure the tray is
secure on the armrests. The tray is not designed to hold the child in the
high chair.
• When making adjustments to the high chair, ensure that your child’s
body, fingers and toes are clear of any moving parts on the high chair.
• Position the high chair away from furniture, walls, hot surfaces and
liquids, window covering cords and electrical cord. Position the high
chair away from furniture when the high chair is not being used at a
table with tray removed.
• The child must not be in the high chair when selecting the height
adjustment.
• Do not sit the child in the lowest position. This position is to be used only
when folding
• If any component of the high chair is not working as intended and/or a
component is missing/broken, stop using this product immediately and
contact Infa Group for immediate repair/advice.
• The highchair should only be used in an upright position once the child
is capable of reliably and consistently sitting upright.

WARNINGS
FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
DO NOT LEAVE CHILDREN UNATTENDED.
THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED -
MOST INJURIES FROM HIGH CHAIRS ARE CAUSED BY FALLS.
POSITION THE HIGH CHAIR AWAY FROM SOLID STRUCTURES AND
BENCHES TO AVOID INJURIES CAUSED BY FALLS AND BY ACCESS
Position the high chair away from solid structures and benches to avoid
injuries caused by falls and access to dangerous items.
infagroup.com.au instagram.com/infagroup_
tiktok.com/@infa_group facebook.com/infagroupau
Head Office
110-114 Old Bathurst Rd,
Emu Plains 2750, NSW Australia
P.O Box 487, Emu Plains 2750,
NSW Australia
Customer Care
AU 1300 92 4632
NZ 067 5090 870
[e-mail]