Monogram ZDP486NDPSS User manual

Monogram®Professional Range

2
IMPORTANT SAFETY NOTICE
The information in this presentation is intended for use by individuals
possessing adequate backgrounds of electrical, electronic, & mechanical
experience. Any attempt to repair a major appliance may result in
personal injury & property damage. The manufacturer or seller cannot be
responsible for the interpretation of this information, nor can it assume
any liability in connection with its use.
WARNING
To avoid personal injury, disconnect power before servicing this product.
If electrical power is required for diagnosis or test purposes, disconnect
the power immediately after performing the necessary checks.
RECONNECT ALL GROUNDING DEVICES
If grounding wires, screws, straps, clips, nuts, or washers used to complete
a path to ground are removed for service, they must be returned to their
original position & properly fastened.

3
GE Factory Service Employees are required to use safety glasses with side
shields, cut resistant (Dyneema®) gloves & steel toe shoes for all repairs.
Dyneema® Cut
Resistant Glove
Safety Glasses must be compliant with
ANSI Z87.1-2003
Prescription Safety Glasses
Plano Safety Glasses
Steel Toe Shoes

4
ZDP486NDPSS
ZDP486LDPSS
ZDP486NRPSS
ZDP486LRPSS
ZDP484NGPSS
ZDP484LGPSS
ZDP366NPSS
ZDP366LPSS
ZDP364NRPSS
ZDP364LRPSS
ZDP364NDPSS
ZDP364LDPSS
ZDP304NPSS
ZDP304LPSS
Pro Range Models

5
Burner Configurations

6
Pro Range Nomenclature

7
Pro Range Model Location
The model tag is located under the
front control panel on the left side. The model and serial number is
also located behind the left front
knob on the bezel.

8
Mini-Manual Location
The mini-manual is located at the bottom behind the access panel

9
12” height
36” with adjustable height shelf
Backsplashes are available
in 30”, 36” and 48” widths
Optional Backsplash Kits

10
Pub Number 24-M488
Activates all lights and control displays
Pro Range Sales Demo Kit
120V applied to L1 and L2 (note jumper L2-N)

11
ZGU366NPSS
ZGU366LPSS
ZGU364NDPSS
ZGU364LDPSS
ZGU364NRPSS
ZGU364LRPSS
ZGU486NRPSS
ZGU486LRPSS
ZGU484NGPSS
ZGU484LGPSS
ZGU486NDPSS
ZGU486LDPSS
New “Rangetop” Models

12
Rangetop Nomenclature

13
Rangetop Model Location
The model tag is located under the
cooktop.
The model and serial number is also
located behind the left front knob on
the bezel.

14
Mini-Manual Location
Mini-Manual

15
Pro Range Models
Pro Range Models – –Part Number Part Number
ZDP304N/LPSS - WB03K10268
ZDP366N/LPSS - WB03K10269
ZDP364N/LRPSS - WB03K10270
ZDP364N/LDPSS - WB03K10271
ZDP484N/LGPSS - WB03K10272
ZDP486N/LRPSS - WB03K10273
ZDP486N/LDPSS - WB03K10274
Rangetop Models
Rangetop Models – –Part Number Part Number
ZGU366N/LPSS - WB03K10275
ZGU364N/LRPSS - WB03K10276
ZGU364N/LDPSS - WB03K10277
ZGU484N/LGPSS - WB03K10278
ZGU486N/LRPSS - WB03K10279
ZGU486N/LDPSS - WB03K10280
Optional Black Knob Kits

16
Supplied Power Cords
48” Range – 50 amp
30” & 36” Range – 30 amp
115V – 15 amp

17
Range Gas Conversion
Each model is shipped with the
appropriate gas conversion kit
and instructions.
Grill Griddle

18
Rangetop Gas Conversion
Conversion Instructions
Orifice Kit

19
Limited lifetime
Limited lifetime warranty warranty - -Oven racks Oven racks
(parts only)
(parts only)
5
5year limited warranty year limited warranty - -Gas burners Gas burners
(parts only)
(parts only)
(Grill and griddle burners not included)
(Grill and griddle burners not included)
2
2year warranty year warranty - -Parts and labor Parts and labor
Warranty

20
ZDP484NGPSS