Monoprice 11501 User manual

3
DEVICE DRIVER INSTALLATION
You must install the device driver for your Mac to recognize the Docking
Station and utilize all of its features. This section illustrates the steps needed
to install the drivers to a Mac running OS X 10.7.x (Lion). Installation to other
OS X versions is very similar.
IMPORTANT NOTE!! DO NOT connect the Docking Station to your Mac until
instructed to do so. The device driver cannot be properly installed if the
Docking Station is connected.
Step 1
Insert the Driver CD into the CD-ROM drive and run the LAN95xx.pkg
to start installing the LAN drivers.
Step 2
Click “Continue”to proceed.

4
Step 3
Click “Continue”to proceed.
Step 4
Click “Agree”to proceed.

5
Step5
Click “Continue”to proceed.
Step 6
Click “Install”to proceed.

6
Step 7
Type in your password and click “OK”.
Step8
Installation is proceeding….

7
Step 9
Installation of the LAN drivers is complete.Click “Close”.
Step 10
Open the dmg file on the disc to reveal two installation packages.
Double click the pkg file that matches your OS X version (ML=Mountain
Lion, SL=Snow Leopard).

8
Step 11
Click “Continue”to proceed.
Step 12
Click “Continue”to proceed.

9
Step 13
Click “Install”to proceed.
Step 14
Type in your password and click “OK”.

10
Step 15
Click “Continue Installation”.
Step 16
Installation is proceeding…This will take a few minutes.

11
Step 17
Click “Restart”to complete the software installation.
Step 7 (After System Reboot)
1. Connect the external display device (monitor/projector) to the
VGA or HDMIconnector on the Docking Station and turn it on.
2. Use the included micro USB cable to connect the Docking Station to
an available USB port on your Mac. The screen on the second
display will turn on automatically.

12
FUNCTION INSTRUCTION (MAC LION)
DISPLAY ARRANGEMENT
1. Go to and select
“System Preferences…”
2. In“System Preferences” click the “Display” tab.
Select the
appropriate
resolution for
your second
monitor/
display device.

13
3. Click the
“Arrangement”
tab and uncheck
“Mirror Displays”
to extend the
desktop over both
monitors/displays.
4. Move the bar
to assign either
display to be
the Primary
display and to
set its location
in relation to the
other display.

14
If you cannot see
the Display
window to adjust
your secondary
monitor's resolution,
click on the
“Gather Windows”
button.
To simplify using the Docking
Station, click “Show display in
menu bar”.
You will see the display icon
that you can double-click
on at any time to adjust the
display resolutions.
SETUP THE SOUND
1. Go to , and then select
“System Preferences".

15
2. Select the
“Sound”icon.
3.
Click the “Output” tab and select the USB option. The click the “Input” tab
and also select the USB option.

16
DEVICE DRIVER UN-INSTALLATION
Step 1
Unplug the Docking Station from the USB port.
Step 2
Open the dmg file on the disc and double-click the uninstaller icon.
Step 3
Click “uninstall and restart” to proceed.

17
Step 4
Type in your password to allow un-installation and click “OK” to
proceed.
Step 5
Click “Restart” to reboot your system.

18
KM SWITCH
FUNCTION LIST
Function Behavior
for OS
Windows to
Windows
Mac to MAC
Windows to
MAC
Windows
to iPad
Mac to
iPad
Windows
to Android
Mac to
Android
Keyboard & Mouse Control Switching
Use the mouse to
move off the edge
of the screen
Yes
X
X
Use mouse middle
button to switch
Yes
X
Yes
Use hotkey toggle
[Alt+S] to switch
Yes
Yes
Yes
Keyboard sharing
Yes
Yes
Yes
Clipboard Sharing
Text Share
Yes
X
X
Picture Share
Yes
X
X
Data Transfer
Drag and Drop
Yes
X
X
GETTING STARTED: MAC
Follow the steps below to start the application:
1.Connect to the Mac computer:
Using the included mini USB cable, plug the mini B connector into
the Docking Station. Plug the other end into an available USB port
on the other computer.
2.When you initially connect the KM Switch to a Mac computer the
“Keyboard Setup Assistant” launches. Follow the instructions
to select the Keyboard Type for your language.

19

20
Tips: You also can change the setting by going to “System
Preferences” -> “Keyboard” -> “Change Keyboard Type”.