Monoprice 11554 User manual

AUX USB
High Quality T V STAND
with Built-In Sound Console
USER’S MANUAL
PID: 11554/11555

Contents
1
2
1
4
4
4
4
6
7
7
7
7
8
8
8
8
8
8
10
8
10
3
3
Notice
Safety
Product Information
Specifications
Your Home Audio
Introduction
Package Contents
Overveiw of the Main Unit
Overview of the Remote Control
Getting Started
Preparing the Remote Control
Connecting Power
Powering On
Playback
Playback from a Bluetooth® Device
Playback from the OPT Input
Playback from the RCA Inputs
Playback from the AUX Input
Playback from the USB Input
Adjusting the Volume Level
Troubleshooting
Bluetooth® Troubleshooting
Important

1
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN THE COVER
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Notice
Know these signs
This product’s packaging materials are recyclable and can be reused. Please
dispose of any materials in accordance with the local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in
accordance with the local regulations concerning battery disposal.
This product and the supplied accessories, excluding the batteries, constitute the
applicable product according to the WEEE directive.
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
EU Regulatory Conformance
Hereby, Monoprice Inc. declares that this device is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC.

Safety
Important Safety Instructions
■Read these instructions.
■Keep these instructions.
■Heed all warnings.
■Follow all instructions.
■Do not use this apparatus near water.
■Clean only with a dry cloth.
■Do not block any ventilation openings.
■Do not install near any heat sources, such as radiators, heat registers, stoves, or
other devices (including amplifiers) that produce heat.
■Protect the power cord from being walked on or pinched, particularly at plugs and the
point where they exit from the device.
■Unplug this apparatus during lightning storms or when unused for long periods of time.
■All repairs should be performed by qualified service personnel only.
■Battery usage CAUTION – To prevent battery leakage, which may result in bodily injury,
property damage, or damage to the unit, the batteries (battery pack or batteries installed)
should not be exposed to excessive heat, such as direct sunlight, fire, etc.
■Do not expose this device to dripping or splashing water or other liquids.
■Do not place any sources of danger on the device (e.g. liquid filled objects, lighted
candles, etc.).
■Turn off the power switch before unplugging the device from the power outlet.
Hearing Safety
■Listen at a moderate volume level.
■Set your initial volume level to a low setting.
■Be sure to use your equipment reasonably and take appropriate breaks.
Never remove the casing of this device.
Do not place any object under the subwoofer.
Keep this device away from direct sunlight, naked flames, or heat.
Make sure that you always have easy access to the power cord.
Unplug the device from the line power when necessary.
2

Product Information
Specifications
Amplifier
Rated Output Power 64W RMS
Frequency Response 50Hz-20kHz, ±3dB
Signal to Noise Ratio ≥80dB
Speakers
Speaker Impedance 2×(8+4 ohms)+8 ohms
Speaker Drivers 1.5”Tweeter+3”Full range+6.5”Subwoofer
Output Power 2×10W+2×15W+40W RMS
General Information
AC Power 100-240VAC, 50/60Hz
Operating Power Consumption 90W
ECO Standby Power Consumption ≤0.5W
USB USB 2.0
Bluetooth®
Frequency Band 2.402-2.480 GHz
Range (free space) 26 feet (8m)
Standard Bluetooth® 4.0
3

Your Home Audio
Introduction
Enjoy enhanced audio reproduction from TV, DVD, flash disc, or a mobile device with
Bluetooth!
Package Contents
Main unit, Remote control, AC power cord, 3.5mm audio cable, RCA cable, User's Manual.
Overview of the Main Unit
AUX USB
1
2
3
4
5
6
7
89
1011
12 13 14 15
ON
OFF 100-240V~50-60Hz 90W
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN THE CAVER
TV IN
4

1
Standby
2
Increases the volume
3
Decreases the volume
4
Next track
5
Previous track
6
Play / Pause
7
Function selection
8
Adjust subwoofer volume
9
10 USB port
11 AUX IN jack
12 Turn the unit on/off
13 AC Power Cord input jack
15 Stereo RCA inputs
14 Optical input
100-240VAC, 50/60Hz, 90W
TV IN
OPT IN
Screen
5

Overview of the Remote Control
4
7
1
Fast Reverse/Fast Forward
1Standby / On
3Previous/Next track
5
7Movie sound
6
Adjust volume up/down
Adjust subwoofer volume
Mute volume
2
Start or pause playback
- depends on connection type
2
3
6
5
4
Function selection
/
/
/
6

ON
OFF 100-240V~50-60Hz 90W
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN THE CAVER
TV IN
Getting Started
Preparing the Remote Control
!!
Risk of explosion!
Keep the batteries away from heat, direct sunlight, or fire.
Never discard batteries into fire.
For first-time use:
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
①Open the battery compartment.
②Insert one CR2025 battery with correct polarity (+/-) as indicated.
③Close the battery compartment.
Connecting Power
!!
Risk of product damage! Ensure that the power supply voltage
corresponds to the voltage printed on the bottom of the unit.
Risk of electric shock! Never pull the cord.
Before connecting the power, make sure the power switch was turned off.
Connect one end of the AC power cord to the device and connect
the other end of the AC power cord to the wall outlet.
Powering On
①Press the power switch on the back of the unit,
②Press on the main screen.
7.2
7.1
7.2
7
7.1

Playback
Playback from a Bluetooth® Device
Playback from the RCA Inputs
Playback from the AUX Input
Adjusting the Volume Level
During playback, press Vol +/- to increasedecrease the volume level.
During playback, press BASS and then press Vol +/- to increase/decrease the
subwoofer volume level.
During playback, press to mute/unmute sound.
The console can remember the last Bluetooth® device that it received an audio signal
from, so you don't have to pair it again. Note that if you pair a device without following up
with audio playback, the console will not remember that device.
NOTE:
8
8.1
Press the FUNC button on the display panel or press the BT button on the remote control
to enter Bluetooth® mode. When the display panel shows and the Bluetooth® indicator
flashes, turn on the Bluetooth® function of your device, search for nearby devices, and
select the MP-Console entry. If prompted for a passcode, enter 0000 (four zeros). After
pairing is complete, you may need to manually connect to the Sound Console.
8.3
Press the FUNC button on the display panel or press the OPT button on the remote
control to enter optical mode. The display panel will show . Use an optical (Toslink)
cable to connect the output of your audio source device to the console and set the output
of the device to PCM mode.
8.2
Press the FUNC button on the display panel or press the AUXbutton on the remote
control to enter AUX mode. The display panel will show . Use a 3.5mm stereo
audio cable to connect your audio source device to the console.
Press the FUNC button on the display panel or the USB button on the remote control to
enter USB mode. The display panel will show . Plug your USB drive into the USB
port and playback will begin automatically.
Press the FUNC button on the display panel or press the TV button on the remote control
to enter TV mode. The display panel will show . Use a stereo RCA cable to connect
the audio outputs from your TV (or other audio source device) to the console.
Playback from the OPT Input
8.3
8.2
Playback from the USB Input