Montessori Furniture climber Spider User manual

2
3
3
а
а
2
a
ASSEMBLY DETAILS
1 - Hexagon for
3 nogs
20 pcs.
2 - Hexagon for
2 nogs
10 pcs.
b - 4mm hex key
1 pc.
3 - Nog
40 pcs.
a - Screw 6.3x50
80 pcs. + 5 spare
"Spider" climber
Pic. 2
Take one of the hexagons for 2 nogs (2) and install the nog (3) in it fully to get
such a position, so that the holes of the wooden hexagon matched the holes
of the nog. Join the details with the screw (a) using the hex key (b). See Pic.1.
Assemble the lower hexagon:
Pic. 1
To the receive construction attach another wooden hexagon for 2 nogs(2)
and fix it with the screws (a). See Pic.2.

1
а
Engraved mark
3
а
2
3а
1
Pic. 5
Attach the wooden hexagon for 3 nogs (1) to the previously assembled
construction. It should be located in such a way, so that engraved mark
looked outside the construction. See Pic.4.
Attach another nog (3) to the detail 2 using the screws (a). See Pic.3.
Pic. 4
Pic. 3
Attach another detail 3 using the screw (a) and hex key (b) to the hexagon
for 3 nogs (1). See Pic.5.

1
а
Engraved mark
3
а1
Engraved mark
3
3
1
а
а
Pic. 8
Attach another detail 3 using the screw (a) and hex key (b) to the hexagon
for 3 nogs (1). See Pic.7.
Attach the hexagon for 3 nogs (1) to the received construction in a way,
so that the engraved mark looked outside the construction, and fix with
the screw (a). See Pic.6.
Pic. 7
Pic. 6
Install the wooden hexagon for 3 nogs. Hole with engraving should be
located on the outside. Join with the screws (a). See Pic.8.
Assemble 5 such hexagons.
Then assemble the upper hexagon part of the construction.

33
3
3
3
1
1
1
1
1
а
а
аа
аа
а
а
аа
Engraved mark Engraved mark
Engraved mark
Engraved mark
Engraved mark
3
аа
Sequentially join the hexagonal details depicted in the Pic.8 with the help of
nogs (3). Fix them with the screws (a). See Pic.10.
It is to be assembled in a same way as the lower hexagon parts. Use
the wooden hexagons for 3 nogs (1) and nogs (3). Fix with the help of
screws (a) and hex key (b). Hole with engraving in the details 1 should look
outside. See Pic.9.
Pic. 10
Pic. 9

333
33
а
а
а
а
Pic. 12
After attaching all 6 hexagonal parts you will receive the following
construction. See Pic.11.
Pic. 11
Attach the nogs (3) to previously assembled construcion using
the screws (a) and hex key (b). See Pic.12.

a
aa
a
Pic. 13
To be used for its intended purpose only and under
the direct supervision of an adult!
All the responsibility for children’s injuries received during
games on the furniture lies on adults watching after them.
Always be vigilant during children's games!
Join the previously assembled construction and the upper hexagon part, depicted
in the Pic.9. See Pic.13.
Pic. 14
Fix the received construction with the screws (a) using hex key (b). See Pic.14.