Montessori Furniture Wood and Hearts Trees ans Houses User manual

976
60
1000 976
976
90
228
228
65
228
140
976
60
ASSEMBLY DETAILS
Shelf "Trees ans Houses" narrow 1
*Eccentric ties are already installed into the details
1 - Upper cover
1 pc.
11 - Right sidewall
of the drawer 1
1 pc.
6 - Shelf
1 pc.
16 - Base plank of
the drawer 2
1 pc.
26 - Set of Minifixes*
6 pcs.
21 - Right sidewall of
the drawer 3
1 pc.
2 - Left sidewall
1 pc.
12 - Base plank of
the drawer 1
2 pcs.
7 - Decor 1
1 pc.
17 - Long lintel
1 pc.
27 - Screwdriver
1 pc.
22 - Lower rail
1 pc.
3 - Right sidewall
1 pc.
13 - Left sidewall of
the drawer 2
1 pc.
8 - Decor 2
1 pc.
18 - Short lintel
2 pcs.
23 - Upper rail
1 pc.
4 - Lower base
1 pc.
14 - Right sidewall
of the drawer 2
1 pc.
9 - Facade of
the drawer 1
1 pc.
19 - Lower plank of
the drawer 3, 1 pc.
1 pc.
24 - Confirmat
screws 5x40
40 pcs.
5 - Middle wall
1 pc.
15 - Facade of
the drawer 2
1 pc.
10 - Left sidewall of
the drawer 1
1 pc.
20 - Left sidewall of
the drawer 3
1 pc.
25 - 3 mm Hex key
1 pc.

Pic. 1
Take the right sidewall (3) and using the confirmat screws (24) and hex
key (25) attach the lower base (4) and lower rail (22). Fix the details 4
and 22 wih he confirmat screw (24). See Pic.1.
Pic. 3
Attach the middle wall (5) to the lower base (4) using the confirmat screws (24)
and hex key (25). See Pic.3.
Pic. 2
Attach the left sidewall (2) to the previously assembled construction. See Pic.2.
24
24
24
4
24
22
3
24
24
24
2
5
24 24

Pic. 4
Install the shelf (6) into the groove of the middle wall (5) and fix it with
the confirmat screws (24). See Pic.4.
Pic. 6
Attach the upper rail (23) using the confirmat screws (24) and hex key (25).
See Pic.6.
Pic. 5
Install the dowels from minifixes (26) into the upper cover (1) using
the screwdriver (27). See Pic.5.
24
24
24
24
6
5
Install the dowel from minifixes (26)
1
23
24
24
24

Pic. 7
Install the upper cover (1) onto the previously assebmled construction and
using the screwdriver (27) close the eccentriv ties located on the sidewalls (2,3)
and middle wall (5) by turning them 180 degrees clockwise. See Pic.7.
Pic. 9
Take one of the sidewalls of the drawer 2 (13 or 14) and using
the confirmat screws connect the facade (15) and lower drawer plank (16)
to it. Then screw another sidewall to the assembled construction. See Pic. 9.
Pic. 8
Attach the decor details (7,8) to the previously assembled construction
using the confirmat screws (24). See Pic.8.
Then assemble the drawers:
13
14
15 16
1
3
2
5
24
24
24
24
24
24
7
8

Pic. 10
To be used for its intended purpose only and under
the direct supervision of an adult!
All the responsibility for children’s injuries received during
games on the furniture lies on adults watching after them.
Always be vigilant during children's games!
Take one of the sidewalls (20 or 21) ans using the confirmat screws (24) attach
the lower planks (12) to it. Then locate the short lintels (18) on the lower
plank (19) and install the longer lintel (17). Fix the construction with the confirmat
screws (24) and attach it to one of the sidewalls (21 or 20). Another sidewall is to
be attached to the previously assembled construction. See Pic. 10.
Pic. 11
Take one of the sidewalls of the drawer (10 or 11) ans using the confirmat
screws, attach the facade (9) and lower plank of the drawer (12). Then attach
another sidewall in a similar way. See Pic.11.
17
18
21
20
19
13
24
10
11
9
12 24