Montessori Furniture Wood and Hearts Trees ans Houses User manual

1400
90
228
228
140
228
65
1376
1376
60
60
1376 1376
ASSEMBLY DETAILS
Shelf "Trees ans Houses" wide 2
*Eccentric ties are already installed into the details
1 - Upper cover
1 pc.
11 - Left sidewall of
the drawer 1
1 pc.
6 - Shelf
1 pc.
16 - Facade of
the drawer 2
1 pc.
26 - 3 mm Hex key
1 pc.
21 - Left sidewall of
the drawer 3
1 pc.
2 - Left sidewall
1 pc.
12 - Right sidewall of
the drawer 1
1 pc.
7 - Decor 1
1 pc.
17 - Base plank of
the drawer 2
1 pc.
27 - Set of Minifixes
6 pcs.
22 - Right sidewall of
the drawer 3
1 pc.
3 - Right sidewall
1 pc.
13 - Base plank of
the drawer 1
2 pcs.
8 - Decor 2
1 pc.
18 - Long lintel
1 pc.
28 - Screwdriver
1 pc.
23 - Lower rail
1 pc.
4 - Lower base
1 pc.
14 - Left sidewall of
the drawer 2,
1 pc.
9 - Decor 3
1 pc.
19 - Short lintel
2 pcs.
24 - Upper rail
1 pc.
5 - Middle wall
1 pc.
15 - Right sidewall of
the drawer 2
1 pc.
10 - Facade of
the drawer 1
1 pc.
20 - Lower plank of
the drawer 3
1 pc.
25 - Confirmat
screws 5x40
43 pcs.

Pic. 1
Take the right sidewall (3) and using the confirmat screws (25) and hex
key (26), attach the lower base (4) and lower rail (23). Then take confirmat
screws (25) and fix the details 4 and 23 together. See Pic.1.
Pic. 3
Attach the middle wall (5) using the confirmat screws (25) and hex key (26).
See Pic.3.
Pic. 2
Attach the left sidewall (2) to the previously assembled construction. See Pic.2.
25
25
25
4
25
23
3
25
25
25
2
5
25 25

Pic. 4
Install the shelf (6) into the groove of the middle wall (5) and fix it with
the confirmat screws (25). See Pic.4.
Pic. 6
Attach the upper rail (24) using the confirmat screws (25) and hex key (26).
See Pic.6
Pic. 5
Install the dowels from minifixes (27) onto the upper cover (1) using
the screwdriver (28). See Pic. 5.
25
25
25
25
6
5
Install the dowels from minifixes (27)
1
24
25
25
25

Pic. 7
Put the upper cover (1) on the previously assembled construction and using
the screwdriver (28) close the eccentric ties located in the sidewalls (2,3)
and middle wall (5) clockwise, by turning it by 180 degrees. See Pic.7.
Pic. 9
To one of the sidewalls of the drawer 2 (14 or 15) attach the facade of
the drawer (16) and lower plank (17) using the confirmat screws (25).
Then attach another sidewall (14 or 15) in a similar way. See Pic.11.
Pic. 8
Attach the decor (7,8,9) to the assembled shelf. See Pic.8.
Then assemble the drawers:
1
3
2
5
8
79
25
25
25
25
25
25
25
25
25
14
15
16 17

Pic. 10
To be used for its intended purpose only and under
the direct supervision of an adult!
All the responsibility for children’s injuries received during
games on the furniture lies on adults watching after them.
Always be vigilant during children's games!
To one of the sidewalls of the drawer 3 (21 or 22) attach the lower plank of
the drawer (13) using the confirmat screws (25). Then locate the planks (19)
on the lower plank of the drawer (20). Fix them using the confirmat screws (25)
and attach to one of the sidewalls (21 or 22). Another sidewall (22 or 21) is to
be screwed to the assembled construction. See Pic.10.
Pic. 11
Take one of the sidewalls (11 or 12) and attach the facade of the drawer 1 (10)
and lower oplank of the drawer (13) using the confirmat screws. Then attach
another sidewall in a semilar way. See Pic.11.
18
19
22
21
20
13
25
11
12
10
13 25