moonboon Tripod Stand 2.0 User manual

1
Brugermanual
Moonboon slyngevugge 1
User Manual
Tripod Stand 2.0
User Manual
Important: Read the user manual carefully
and keep it for future use.
Tripod Stand 2.0

2
Brugermanual
Moonboon slyngevugge 2
User Manual
Tripod Stand 2.0
What is Included?
1 Wooden top in walnut wood
6 tube assembly parts
3 tube assembly parts with finished ends (“feet”)
The Stand is designed specifically for Moonboon’s Baby Hammock,
Twin Baby Hammock and Cradle. Use the Stand with or without the
Moonboon Motor. The Stand has a maximum carry capacity of 28 kg
(62 lbs).
The Stand is easy to assemble. No tools are needed.
Start by assembling the individual legs. Each leg has 3 tube assembly
parts. Starting with the Foot-pipe, assemble one leg at a time. 1) Insert
the metal shafts into the bearing. 2) Push the two parts together. 3) Twist
into the locked position.
Attach the legs to the wooden top assembly with the eye bolt facing
downwards. Ensure that each leg is firmly affixed and twisted into the
locked position.
Firmly place the stand on the floor with the rubber soles of the flat-bot-
tom feet on the floor surface. Place the legs as far apart as possible
to achieve maximum balance. Avoid stressing the structure, and do not
place the legs further apart than 130 cm (4.2 feet).
You are now ready to mount your Moonboon Baby Hammock, Twin
Baby Hammock, Cradle or Moonboon Motor. See the next section for
details.
3
2
1
The Tripod Stand 2.0 may only be
placed on a flat floor. Maximal
permitted slope of the floor is 0.15
degrees.
Requirements for flatness are max.
2 mm (1/16 inch), measured at 2
meters (6.5 feet).
4
Assembly
Please note

3
Brugermanual
Moonboon slyngevugge 3
User Manual
Tripod Stand 2.0
Mounting
Mounting a Baby Hammock, Twin Baby Hammock or Cradle
Connect the Hammock Spring with a safety snap hook to the eye bolt on
the wooden top assembly. Do not use any chain or mounting strap above
the Baby Hammock/ Cradle.
Please read the user manual for your Baby Hammock, Twin Baby Ham-
mock or Cradle thoroughly before use.
Mounting a Baby Hammock, Twin Baby Hammock or Cradle and a
Moonboon Motor
The Stand is designed specifically for the Moonboon Baby Hammock
with a Motor or a Cradle with a Motor.
First, attach the Motor to the eye bolt of the Stand using a safety snap
hook. Attach the spring and then hang the Baby Hammock, Twin Baby
Hammock or Cradle under the Motor, according to the product’s user
manual.
Orient both snap hooks with the narrow end towards the motor. Check that
the snap hooks are hanging and locked correctly. Keep the power sup-
ply cord away from the Baby Hammock, Twin Baby Hammock, Cradle
and the Stand.
Please read the user manual for your Baby Hammock/Twin Baby
Hammock/Cradle or Motor thoroughly before use.
Only use a stainless-steel safety snap
hook without coating for mounting the
Baby Hammock, Twin Baby Ham-
mock, Cradle or Moonboon Motor in
the Stand.
The Moonboon stand is designed
for the Moonboon Baby Hammock,
Twin Baby Hammock, Cradle, and
Motor. We can’t guarantee that
products from other brands can be
adequately mounted or will function
correctly with the stand.
Please note
Please note
To avoid the Stand tipping over or tilting, never push the Baby Hammock,
Twin Baby Hammock or Cradle back and forth or use it as a swing or toy.
Important!

4
Brugermanual
Moonboon slyngevugge 4
User Manual
Tripod Stand 2.0
Transportation
Easily disassemble the Stand for transport. Clear the parts from the eye
bolt and put the Stand on its side. Disassemble the leg for carrying.
Never move the Stand when in use
or while your baby is in the Baby
Hammock, Twin Baby Hammock or
Cradle.
Always turn off the Moonboon Motor
when making adjustments or moving
the Stand.
Please note