Mooreco 9169 Series User manual

Compass MakerSpace Tables
UPDATED AS OF: 12/08/2021
Part Numbers: 9169X-X-XXXX, 9169X-X-BUTCHER
1 of 6
INSTRUCCIONES DE ENSEMBLAJE
NO LA TIRE
INSTRUCTIONS DE MONTAGE
NE PAS JETER
ASSEMBLY INSTRUCTIONS
DO NOT THROW AWAY!

Parts List
UPDATED AS OF: 12/08/2021 2 of 6
Hardware
P1 - Table Top
(size will vary)
P2 - Leg Bracket
P3 - Leg
(height will vary)
P4 - Support Bracket
(length will vary)
x1
x2
x4
x1
A - #10 x 1” Wood Screw
B - 1/4-20 x 3” Bolt
C - 1/4-20 Lock Nut
D - Locking Casters
E - Non-Locking Casters
F - Lock Washer
G - Caster Wrench
x22
(x18 - 48”)
x16
x16
x2
x2
x4
x1

For full product warranty details, please visit:
Para obtener información sobre la garantía del producto, consulte este sitio (ingles):
Pour plus d’informations sur la garantie du produit, consultez ce site (anglais):
For questions on assembly or missing/damaged parts, please contact us using the
following information.
Para preguntas sobre el ensamblaje o piezas faltantes o dañadas, por favor
contáctenos usando la siguiente información.
Pour toute question sur le montage l-assamblage manquantes ou endommagées,
veuillez nous contacter en utilisant les l’information ci-dessous.
To register your product for warranty, please visit:
Para registrar la garantía del producto, vea este sitio (en ingles):
Pour enregistrer la garantie de votre produit, consultez ce site (en anglais):
Review full assembly instructions and
check that all parts are present before
beginning assembly. Heavy or large
furniture may require multiple persons in
order to properly assemble. If you have
questions regarding assembly, contact
the manufacturer before continuing.
Damage due to incorrect assembly may
not be covered by warranty. Do not use
product unless all screws are tight. Check
all screws for tightness at least every
six months. If parts are broken, missing,
damaged, or worn, stop use of the product
until repairs are made by your dealer using
factory authorized parts.
WARNINGS AND DISCLAIMERS
WARRANTY
CARE & MAINTENANCE
PRODUCT REGISTRATION
UPDATED AS OF: 12/08/2021 3 of 6
Phone:
1.800.749. 2258
(Monday – Friday, 8AM – 5PM
Central Time)
http://moorecoinc.com/warranty
https://moorecoinc.com/register
Email:
[e-mail]

STEP 1
UPDATED AS OF: 12/08/2021 4 of 6
STEP 2
Attach two Leg Parts (P3) to the Leg Bracket (P2) using bolts (B) and nuts (C). Repeat
step for other bracket.
Connect Leg Bracket (P2) to Support Bracket (P4) using bolts (B) and nuts (C). Repeat
step for other leg.
E/F
P2
D
P2B
P2A

Mount frame to table using screws (A). Each leg receives six screws. Number of
Support Bracket screws will vary by model.
STEP 3
UPDATED AS OF: 12/08/2021 5 of 6
Lay frame on top of underside of table. Use holes as guides for placement.
P4
P9
G
P6
B
STEP 4

STEP 5
UPDATED AS OF: 12/08/2021 6 of 6
THIS COMPLETES ASSEMBLY INSTRUCTION
B
P10
C
Install casters (D,E) with lock washers (F) using the wrench to screww in caster stems.
Locking casters should be installed on opposite ends of the table.
STEP 6
With two or more people, flip table upright.