Mooreco Tote Tray 2 User manual

Student Desk Tote Tray 2
UPDATED AS OF: 06/09/2022
45128, 45131
1 of 6
INSTRUCCIONES DE ENSEMBLAJE
NO LA TIRE
INSTRUCTIONS DE MONTAGE
NE PAS JETER
ASSEMBLY INSTRUCTIONS
DO NOT THROW AWAY!

Parts List
UPDATED AS OF: 06/09/2022 2 of 6
Hardware
P1 - Rail Bracket
P2 - Rail
Optional:
P3 - Tray
x2
x2
x1
A - #10 x 1”Wood Screw
B - M5 - 12mm Screw
C - M5 Steel Cap Nut
x8
x6
x6

For full product warranty details, please visit:
Para obtener información sobre la garantía del producto, consulte este sitio (ingles):
Pour plus d’informations sur la garantie du produit, consultez ce site (anglais):
For questions on assembly or missing/damaged parts, please contact us using the
following information.
Para preguntas sobre el ensamblaje o piezas faltantes o dañadas, por favor
contáctenos usando la siguiente información.
Pour toute question sur le montage l-assamblage manquantes ou endommagées,
veuillez nous contacter en utilisant les l’information ci-dessous.
To register your product for warranty, please visit:
Para registrar la garantía del producto, vea este sitio (en ingles):
Pour enregistrer la garantie de votre produit, consultez ce site (en anglais):
Review full assembly instructions and
check that all parts are present before
beginning assembly. Heavy or large
furniture may require multiple persons in
order to properly assemble. If you have
questions regarding assembly, contact
the manufacturer before continuing.
Damage due to incorrect assembly may
not be covered by warranty. Do not use
product unless all screws are tight. Check
all screws for tightness at least every
six months. If parts are broken, missing,
damaged, or worn, stop use of the product
until repairs are made by your dealer using
factory authorized parts.
WARNINGS AND DISCLAIMERS
WARRANTY
CARE & MAINTENANCE
PRODUCT REGISTRATION
UPDATED AS OF: 06/09/2022 3 of 6
Phone:
1.800.749.2258
(Monday – Friday, 8AM – 5PM
Central Time)
http://moorecoinc.com/warranty
https://moorecoinc.com/register
Email:
[e-mail]

STEP 1
UPDATED AS OF: 06/09/2022 4 of 6
STEP 2
Place one Rail Bracket (P2) on table and secure assembly using four (4) #10 x 1”
Wood Screws (A).
A
With one Rail assembly screwed into the top, measure 13” from the center of the bracket
and make a mark.
13”
P1

STEP 3
UPDATED AS OF: 06/09/2022 5 of 6
STEP 4
Line up the second Rail Bracket (P1) with the mark made from previous step. Screw in the
second Rail Bracket (P1) using four (4) #10 x 1” Wood Screws.
A
Screw together the Rail Bracket (P1) to one of the Rails (P2) using three (3) M5 -
12mm Screws (B) and three (3) M5 Steel Cap Nuts (C).
C
B
P2
P1

Insert tray into rail assembly.
UPDATED AS OF: 06/09/2022 6 of 6
Optional
THIS COMPLETES ASSEMBLY INSTRUCTION
STEP 5
Optional
Repeat with other side by mirroring bracket.