Morfuns Eole User manual
Morfuns Carbon Fiber Electric Folding Bike
Owner’s Manual
Overview
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Display
Handlebar
Brake
Adjustable Stem
Stem Clamp
Front Fork
Disc Brake
Central Lever
Foldable Pedal
Crank Set
Wheel
Derailleur
Seatpost Clamp
Saddle
Seatpost Battery
2
Parameters
Motor
Rear Hub Motor
Nominal/Peak Power
250W/500W
Pedal Assist Top Speed
25km/h (can be modified via computer to comply with local regulations)
Range
More than 45km at average pace
Charge Time
4.5hrs (2hrs with optional fast charger)
Display
Backlit LCD with controls
Computer
LCD with modifiable speed limit and 6km walk assist
Standard Battery Type
Lithium-Ion Samsung Cells
Standard Battery Specs
36v 7.0Ah 252Wh
Bottle Battery Type
Lithium-Ion Samsung Cells
MAX Battery Specs
36v 7.0Ah 252Wh
Readouts
Distance traveled, current velocity (km/h or mph), battery autonomy and mode
Pedal Assist
5 Levels
Frame
Full carbon foldable in 3 steps
Fork
Custom full carbon
Rear deraiilleur
Shimano Tourney 7 speeds
Brakes
Hydraulic Disk Brakes
Tires
Black 20*1.95
3
Quick Start
Remove all the packaging from
your new Eole.
Unfold your Eole and lockout the
frame with the central lever.
Locate and unfold the steering
stem. Make sure the stem is
securely locked up.
Lossen a seatpost clamp, and then
select an appropriate position and
height of the saddle. Tighten the clamp
and make sure it’s locked.
Note that it should not exceed the
maximum safe height.
Adjust the height of the
steering stem.
10
190
180
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
Recommended saddle height
stature
185cm
180cm
175cm
170cm
165cm
160cm
155cm
1
2
3
4
5
4
Quick Start
6
To install pedals, you must use a wrench(15mm):
Pedal to the left leg tighten counterclockwise,
pedal for the right foot - clockwise.
7
Before first use of bicycle you must charge the battery.
Connect the power port with the battery output plug.
Power On/Off
Hold down the Power button and the display will switch on and light
up (if the battery has been switched on...). Hold down the Power
button again and the display will switch off.
Walk assist mode
Press and hold the DOWN button for 2 seconds and your e-bike
motor will start to run at a uniform speed of 6 Km/h.
Led Backlight (Front light)
Press UP for 2 seconds to turn on the backlight of the display.
HoldUP again for 2 seconds and the light is turned off.
Power assistance selection
Use the UP and DOWN buttons to change the assistance provided
by the Motor. The power ranges from level 1 to level 5.
Access the settings
For access settings, please contact the seller directly for full
instructions.
8
Switch on/off the bicycle
M
Power Button
UP
DOWN
5
Warranty
Kind of warranty
Parts
Terms
Frame type
Frame
2 years
Average accessories
Front fork, wheel, shift knob, flywheel, gear
drive, the crankshaft, the driving axle, rear hub,
screws hockey, complex steering wheel,
saddle pin, front brake calipoers, rear brake
calipers, brake handle, flipper, cup of front fork,
carriage, complex magnetic clasp of wheel.
1 year
Smart parts
Display, motor, motor controller, lights, power
adapter, sensor, battery, etc.
1 year
Consumables
Tires, inner camera, chain, barke pads, brake
cable, cable for switching gears, reflector,
headlight, taillight, pedal clip for wires and all
additional components.
No warranty
1. A warranty period has expired;
2. Absence of sales receipt or it correction;
3. Damage, arising under force majeure circumstances;
4. Completion of maintenance, fall, neglect, abuse, water impact, accident, damaged label and marking device;
5. Device model, specified in the warranty card, does not match real goods;
6. Performing maintenance device, that does not meet guidelines, specified in instructions;
7. Emergence of unusual sound and vibration of pedals, rear bushings, steering systems, shock absorber, flywheel and other parts;
8. Deformation of wheels as a result of a heavy blow; damage to parts, caused by external factors or drop the bike; lowering the wheel
as a result of a sharp object punctured; damage to individual components due to delayed replacement parts; damage or scratches on
a saddle; frame damage as a result of installing a saddle above the specified limit height;
9. An emergence of flaking varnish, appearance of corrosion on a frame and other details of the bike due to moisture, shock, friction or
other external factors; natural shedding varnish or fading of colors on metal, carbon and plastic parts after prolonged use of the
bicycle;
10. Damage to the bicycle and its functions, as a result of its use to perform tricks, lowering the stairs, jumps and other similar actions;
11. Fracture or deformation of a frame as a result of excessive and improper use of a bicycle;
12. Built-in sensors are not subject to multiple charging. A warranty terms not apply to a dry battery, push-button type battery. When
battery is spent, its replacement is performed by user and one’s costs.
6
Cautions
Battery & Charge
1. Red indicator on the charger means charging, when it turns green ,please stop charging your battery;
2. Do not expose to temperature -20℃＜or ＞35℃，Fully charge the battery and store separately i f not use for over 30
days.Fully charge it every 60 days,or the battery may self-discharge and be damaged. This damage is not covered by the
Limited Warranty;
3. Never expose your battery to damp environment or soak into water,never short circuit the battery terminals, This damage is
not covered by the Limited Warranty;
4. Charge with the original charger only;
5. Do not disassemble/punch battery pack.Do not place it in fire or drop from high ,Avoid contacting with contacts;
6. Turn off e-bike’s power before charge it.Plug the charge port first then the AC plug;
7. Do not cover any items on the charger during charging; 8.Pull out charge port before the AC plug;
8. Please keep battery outreach from children.
9. The capacity of Li-battery will decrease when -10℃<;
10. Recycle or dispose of in accordance with local regulations.
11. Do not let outer substances to penetrate to a power adapter,
Riding & Maintaining
1. Must with your helmet on and follow the local laws and regulations；
2. Read this instruction carefully before riding a e-bike；
3. Start your ride with the 3rd PAS class；
4. Keep the lamp on at night；
5. Fully check break system ,tire pressure ,and battery remain before riding；
6. PLEASE do take front break FIRST；
7. Do not intense riding；
8. Do not ride into water over 15cm；
9. Replace the quick-wear parts(like break pad)in time；
10. Juveniles Pregnant Intoxicated are not allowed to ride e-bike;
11. Keep your e-bike away from damp, high temperature or corrosive environment；
12. Check screws ,chain and other parts regularly.
7
For more information, you can also follow us
@MorfunsBicycle morfuns_bicycle
Welcome to share wonderful moments with us.
Table of contents
