Morgan MAC-COOL10A User manual

Air
Cooler
MAC-COOL10A

Parts Identification
Specifications
Safety Precautions
Operating Instructions
Installing Hose Connector
Care & Maintenance
13
13
13
1
2
3 - 4
C O N T E N T S
5
2 - 3
4
5

Control Panel Display
PARTS IDENTIFICATION
COOL
ON
OFF
SPEE D
OFF
LOW
MID
HIGH
ON
OFF
SWING

1. Thank you for purchasing a quality Morgan appliance. Please keep this
instruction manual close at hand for future reference.
2. Always unplug the appliance from the power supply outlet before cleaning
it or when not in use.
3. Do not allow children to operate this appliance and always keep it away
from children’s reach to prevent scalds, electric shocks or other injuries.
4. Always attach the power cord to the appliance BEFORE you plug it into
the power supply. To disconnect the appliance, switch off first before
removing the power plug from the power supply.
5. Close supervision is necessary when operating the appliance near
children. Ensure the power cord does not hang over the work surface.
6. Do not operate the appliance with a damaged power cord set or plug. Any
repairs should always be undertaken by an experienced technician or by
an authorized service centre.
7. Always place the appliance on a flat sturdy surface. When moving the
appliance, always be aware not to touch hot surfaces, or avoid possible
spillage of hot liquids it may contain.
8. Do not immerse the appliance, or electrical parts into water or any other
liquids.
9. Use of accessories or equipment not supplied by the manufacturer may
cause damage or malfunctioning of your appliance or result in injuries.
SAFETY PRECAUTIONS
SPECIFICATIONS
Rated Voltage / Frequency
220-240V~
Frequency
50Hz
Rated Wattage
220W

10. Note: This appliance is recommended for commercial use. Do not use
the appliance apart from its intended use or while standing on a damp
area.
11. Do not place the appliance on or near a hot gas or electric burner, or near
easily flammable material.
12. This appliance should not be used by the physically challenged, slow in
response or mentally challenged people (including children) unless close
supervision is provided during operation.
HOW TO USE
Operation Method
Fill water into the appliance by pouring clean water into the water tank
through water inlet #1.
When adding water, pay attention to the water level indicator at the front of
the appliance.
Do not over fill water above the maximum water level.
Close the cover after adding water, otherwise the appliance will not work.
To reduce temperature further, add ice into the water tank.
Water can also be supplied into the appliance by connecting a water hose
into the water inlet #2.
Cooler Knob
Turn this knob to ON position after adding water or ice to begin using this
appliance. Outlet wind temperature is lower after 20 seconds.
OPERATING INSTRUCTIONS
SAFETY PRECAUTIONS

Speed Knob (also functioned as ON/OFF)
Turn on the speed knob to start operating the unit.
Turn this knob to set the speed as required from “LOW”, MEDIUM” or
HIGH”.
To switch off, turn the speed knob to OFF position.
Swing Knob
Turn the swing knob to ON position and the louvers will start to swing
horizontally. You may manually adjust the louvers for vertical air direction.
To switch off, turn the knob to OFF position.
INSTALLING HOSE CONNECTOR
To attach a hose screw on the hose connector supply with the unit to
the water inlet #2.
Verify that the hose connector is screwed tight.
Connect a ½” water hose (not supplied with the unit) to the hose
connector.
Verify water tight connection by visually examining the connection.
OPERATING INSTRUCTIONS

Always disconnect the appliance from the power outlet before
cleaning.
Clean the water tank once a month for best performance and for hygiene
purposes.
There are two ways to clean the water tank, either by (1) opening the
water tank cover and pouring water into the water tank or (2) connect a
water hose into water inlet #2 and fill up the water tank with water. This is
followed by unscrewing the drainage stopper at the bottom of the unit to
drain off the waste water.
Clean the unit’s exterior using mild soap and soft cloth.
Do not clean with alcohol or solvent cleanser.
CARE & MAINTENANCE

Always disconnect the appliance from the power outlet before
cleaning.