Morgan 950012 User manual

HOT-DOG MACHINE
Instruction Manual

- 1 -
Thank you for purchasing this professional equipment! You have chosen
equipment that combines optimum technical properties with extreme user
comfort .We want you to get the greatest possible satisfaction out of this
equipment.
1. SAFETY INSTRUCTIONS
Please comply closely with these instructions to avoid any risk of
fire ,electric shock ,burns of other injury or damage .When using this
equipment ,comply constantly with the basic safety precautions, for
instance:
ØTake into considerations the instructions, keeping them with the
equipment at all times.
ØProtect the equipment from sunlight , freezing and damp.
ØKeep the equipment far away from children.
ØMake sure that only trained people could use the equipment.
ØNever move of the equipment when it is operating ,or when the
surfaces are still hot .
ØCheck that the equipment is properly turned off before connecting
or disconnecting it .
ØNever touch the hot surfaces; use the handles and buttons.
ØKeep the cord away from hot services.
ØBe confined to be repaired by qualified personnel only.
ØUse only original spare parts.
2. OBJECTS CONTAINED IN PACKAGE
ØProduct Name: Hot–dog Machine
ØSpare Parts： One Stainless Steel Cover
Two Stainless Steel Bucket
One Cylinder
One Aluminium Water Container
Four Heating Rod
3. USAGE
This equipment can be used to cook sausage through vapour, or bread
which is used for cooking hot-dog.
4. MODE OF OPERATION
There is a heating container in hot-dog machine,which is used to cook
hot-dog by the vapour produced by the water in the water container.

- 2 -
The shell of heating container, made of glass ,should be put on the
water container. There are two dummy boards ,one is used to store
cooked hot-dog, and the other is to cook hot-dog. A hot dog is cooked
for a little while,so there is no water on the surface of it.
Heating rod is used to bake bread .
The adjuster can adjust the temperature of the components, and these
conponents are used for heating rod and water container at the same
time.
5.OPERATION/HANDLING
a) Caution:
ØPlace the equipment on a stable and heating resistant surface.
ØNever place the appliance near to a wall or a partition made with
combustible materials even if it is covered with a good insulating
material.
ØA distance of 10cm from the partition or the wall is considered
enough.
b) Usage:
ØAdding 650ML water to water container
ØDon not use the machine without water.
Connecting power:
ØMake sure that the voltage and frequency of the power supply system
is the same with the numbers written on the nameplate.
ØPlease check whether electric cable and plug are well.
ØPlease straighten electric cable, cross a square hole,and cover
the square hole before crossing, .
ØThe plug should plug in the socket which has an earth conductor.
Caution : If insert mains plug into a socket without an earthed
conductor, or connect directly with power supply system ,please ask a
trained person to do.
START:
1.Choosing the temperature you want .
2. If you want to preheat quickly, please adjust the knob to the position
"MAX"

- 3 -
3. if using it all the time,please consider the temperature and adjust
it to certain position.
Stop：
1. Rotate the knob to the position<0>.
2. Cut off the power.
3. Let the machine be cooling.
4. Clean the machine.
d)Failure /Repair:
In case of failure or if a part is damaged, please call your after sales
service and have qualified person deal with technical operations.
6.CLEANING AND MAINTENANCE
ØRemove the connector
ØClean the appliance regularly each time you use it.
ØFor cleaning ,use only mid non-abrasive maintenance products for
stainless steel, soapy water or dishwashing liquid with a non-abrasive
sponge.
ØWipe the appliance with a damp cloth.
ØDry the appliance with a soft clean cloth .
ØNever clean the appliance with a jet of water because leaks could cause
irreparable damage to it .
ØNever immerse the appliance, the cord or plug in water or any other
liquid, to avoid electric shocks.
ØDon't put the machine near heat source.

- 4 -
7.TECHNICAL CHARACTERISTICS
Model 950012 950013
Power 2*300W 300W
Outside dimensions 575*335*430MM 355*335*420
Ampere 2.5A 2.5A
Weight 9.7kg 5.9kg
8. CIRCUIT DIAGRAM
220-240V/50HZ OR 110V/60HZ

- 5 -
9. MAINTENANCE CHART AND COMPONENTS
1cover
2bucket
3Glass sock
4water container
5handle
6
Protector frame for
electric part
7Base plate
8
Ceramics
connection
terminals
9switch
10 knob
11 ring for knob
12 heating element
13 base bottom
14 feet
15 base welding
16 Cord and plug
17 cable connector
18 heating rod