Morgan MWM-B1270SA User manual

E-mail: [e-mail]
www.morgan.my
Market Expansion
Services by
www.dksh.com.my
facebook.com/morganappliances
USER MANUAL
MWM-B1270SA
Semi-Auto
Was ing
Mac ine
MWM-B1270SA(IM)070915_Layout 1 10/15/15 9:55 AM Page 1

3
SAFETY PRECAUTIONS
2
Be sure to comply with the ollowing to prevent damage to body and property o
you and others:
The symbol stands for “pay attention” , and the picture of specific items needs attention
shows in.
The symbol stands for “prohibited”, and the picture of specific items prohibited shows in.
The symbol stands for “must do”, and the picture of specific items must be done shows in.
WARNING
•This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
•This appliance is for indoor use only.
•Children should be supervised to ensure that they do not play with the appliance.
•When choosing the water inflowing to wash tub or spin tub , please do not move the water inlet valve
during the process of water inflowing.
•Use only the supplied new hose sets. Do not reuse old hose sets.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•The openings must not be obstructed by a carpet.
•If strong vibration occurs in time of spinning, open the spin cover immediately. Make sure that the
washing machine is placed on a flat and stable floor ,and then adjust washing materials, distribute
them evenly.
•To do spinning and draining together, please spin for 1 minute before draining.
•Do not wash or spin waterproof clothes or clothes that float easily to avoid abnormal vibration or
damage to the clothes.
DO NOT install machine in
damp and wet areas to prevent
electric shocks, sh ort c irc uits
and damage.
No wet
areas
Do not place inflammable materials
like burning candle, mosquito
incense, cigaret etc. or heating
source like electric stove, calorifier
etc. on the machine.
Smoke & heat
sources prohibited
DO NOT dismantle/
assemble the machine.
Do not
dismantle
SAFETY PRECAUTIONS
WARNING
Do not spray water directly to
the machine.
Avoid spraying
water
Never allow young children to
sit or place heavy objects on it.
Prohibited
Grounding
Prohibited
Prohibited
Prohibited
Prohibited
Forbid
Prohibited
Prohibited
Do not wash clothes that are
stained with kerosene, petrol,
alcohol, and other flammable
substance.

Ensure water inlet hose is
connected and the tap is turned
on before washing.

Do not exceed the max. water
level to avoid water overflowing
and damaging the machine.
T
o avoid electric shock resulting
from electric leakage, please
connect grounding cable of the
plug properly.
Never allow young children to
climb onto the machine or play
near it during use to avoid
accidents.
If using warm water, ensure
water temperature does not
exceed 50ºC.
waterproof
Do not wash down-filled coat,
raincoat or similar clothes.
Always remove dirt and dust on
the power plug for maximum
contact with power supply.
Never insert hands into the tub
during operation.
Do not replace power cord by
yourself.
Do not damage the power cord
& plug to avoid electric shock,
short circuit or fire.
Insert power plug into power
supply correctly.
Do not pull the cord when
unplug the power plug.
MWM-B1270SA(IM)070915_Layout 1 10/15/15 9:55 AM Page 2

5
PARTS IDENTIFICATION
4
WARNING
Never insert/remove the power plug with wet
hands to prevent electric shocks.
Always remove power plug from power supply
after every use.
Unplug The Plug
CHANGE THE POSITION OF THE DRAINAGE HOSE
The ex-factory installation position of the drainage hose is located the spin side. According to the
installation site, the drain hose can also be installed at the wash side of the machine. The method is as
follows:
1. Unplug the power cord and empty water inside the drainage hose completely.
2. Spread a piece of soft cloth on the floor (e.g. a blanket) and place the washing machine on it gently.
3. Take the drainage hose out from the buckle at the spin side, and put it into the buckle at the
wash side.
4. Hang up the drainage hose kit.
FOR LOWER DRAINAGE SYSTEM ONLY Front
INSTALLATION SITE
In order to avoid electrical failure, discoloration and deformation, do not install the machine in the
following places:
 ocations exposed to
direct sunlight
 ocations exposed to rain  ocations with uneven or
unstable ground
SAFETY PRECAUTIONS
ATTENTION TO INSTALLATION
Control Panel
Wash Cover
Water Inlet
Lint Filter
Wash Tub
Pulsator
Base
Spin Cover
Frame
Cabinet
Power Plug
W
Drainage Hose
(For Lower Drainage Only)
Water Inlet Water InletWash Timer
Wash-Drain
Selector Spin Timer
Water Inlet hoseInner Spin Cover
D
The illustration a ove is for reference only. Specific illustration applies to actual models.
WATER INLET: For filling water
WASH TIMER: For selecting washing duration.
SPIN TIMER: For selecting spinning duration.
WASH-DRAIN SELECTOR: Select “Normal” or “Heavy” for washing or rinsing. Select “DRAIN” for
draining.
ACCESSORIES
CONTROL PANEL
MWM-B1270SA(IM)070915_Layout 1 10/15/15 9:55 AM Page 3

7
6
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
PREPARATION INSTRUCTIONS
 Plug in power plug and connect the water inlet hose.
 ay down the lower drainage hose and connect it to the sewer.
 Ensure that there are no objects such as coins, hairpins, mud or sand in the pocket.
 Strings should be knotted in advance to prevent entanglement.
 Clothes can be classified for washing according to the texture, dirtiness and colour.
 For small pieces (e.g.,stockings) or fluffy clothes, place them into a nylon net for washing.
Re erence o laundry quantity corresponding to di erent capacities
SHIRT UNIFORM JEANS JACKET
AUNDRY about 500g about 650g about 900g about 1600g
CAPACITY
2.0kg Capacity about 4 pcs. bout 3 pcs. about 2 pcs. about 1 pcs.
3.0kg Capacity about 6 pcs. about 4 pcs. about 3 pcs. about 1 pcs.
3.6kg Capacity about 7 pcs. about 5 pcs. about 4 pcs. about 2 pcs.
4.6kg Capacity about 9 pcs. about 6 pcs. about 5 pcs. about 2 pcs
5.0kg Capacity about 10 pcs. about 7 pcs. about 5 pcs. about 3 pcs.
5.5kg Capacity about 11 pcs. about 8 pcs. about 6 pcs. about 3 pcs.
6.0kg Capacity about 12 pcs. about 9 pcs. about 6 pcs. about 3 pcs.
7.0kg Capacity about 14 pcs. about 10 pcs. about 7 pcs. about 4 pcs.
7.5kg Capacity about 15 pcs. about 11 pcs. about 8 pcs. about 4 pcs.
8.0kg Capacity about 16 pcs. about 11 pcs. about 8 pcs. about 4 pcs.
8.5kg Capacity about 17 pcs. about 12 pcs. about 9 pcs. about 5 pcs.
10.0kg Capacity about 20 pcs. about 15 pcs. about 10 pcs. about 6 pcs.
12.0kg Capacity about 24 pcs. about 18 pcs. about 13 pcs. about 7 pcs.
The above figure are for reference only, specific weights are subject to actual laundry
Laundry volume and detergent dosage re erence
FABRIC TYPE AUNDRY WATER WATER F OW WASH TIME DETERGENT
CAPACITY(kg) level (minutes) amount (g)
Synthetics, silk, 0 – 3.0 ow 3 About 36
Delicate fabrics 3.0 – 4.5 Mid Normal 3 –5 About 46
Cotton or linen 0 – 4.5 Mid 7 About 46
4.5 – 7.0 High Normal 7 – 10 About 55
Heavy soils 0 – 4.5 Mid 10 About 46
4.5 – 7.0 High Heavy 10 – 35 (soak 20) About 55
The dosage of washing detergent varies according to dirtiness and texture of laundry.
Install t e
was ing mac ine
1
Load t e laundry
2
Add detergent
and water into
t e was tub
3
Turn t e was timer
knob to set was time
4
Set t e was drain
selector to “Drain”
position after was ing
5
Repeat t e steps 3-5
for rinsing
6
Move t e laundry
into t e spin tub and
close t e spin cover
7
Turn t e spin timer
knob to set spin time
8
Take out t e laundry from
t e spin tub
9
WASHING METHOD
1. Insert the inlet hose into the water inlet, and choose
injecting water to the wash tub.
2. Place the laundry into the wash tub, and add detergent into it.
When filling water to half of the water level, turn off the water tap
and let laundry soak in the detergent for a few minutes, then fill
water to desired water level.
3. Set wash program to “Normal” or “Heavy” according to load and laundry type.
4. Turn the wash timer knob to select wash duration.
5. After washing, set the wash drainage selector to “Drain” to drain out the water.
Water Inlet
Indicator
S
MWM-B1270SA(IM)070915_Layout 1 10/15/15 9:55 AM Page 4

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
1. Shake out the
laundry and put
them into the
spin tub.
Spin Cover
Safety Cover
3. Close the safety
cover and the
spin cover.
4. Refer to the following table to select spinning time.
WASHING MATERIALS SPIN TIME
Silk About 50 seconds
Light clothes (fiber/blended) About 1 minute
Knit ear (fiber) About 1–2 minutes
Under ear (cotton) About 2–3 minutes
Slipover (cotton/linen) About 3–4 minutes
To eling coverlet (cotton) About 5 minutes
Correct I
Inner
Spin Cover
Spin Tub
Incorrect
I
2. Place the inner
spin cover on the
laundry. Ensure
that the inner spin
cover is placed
horizontally.
98
RINSING METHOD
A. Spraying rinse (rinse in the spin tu )
1Place the laundry into the spin tub after washing.
2Turn on the water tap, choose to fill water into the spin tub for 3-4 minutes, and then turn off the
water tap.
3The above steps can be repeated.
4Set the spin timer for 2-5 minutes for rinsing.
NOTE:
1If there are rust sediments in the water, do not choose spraying rinse to avoid rust from
staining laundry.
2Ensure that water does not fill the tub during spinning.
B. Common rinse (rinse in the wash tu )
1To save time, water and energy, do pre-spinning before rinsing.
2Place laundry which have already been spun into the wash tub.
3After filling water to the desired level, turn off the water tap.
4Turn the “Wash selector” knob to "Normal” or “Heavy”.
5Set the “wash timer”to the desired time (about 3-5 minutes)for rinsing.
6After rinsing, put the washing materials into the spin tub to spin for 1 to 5 minutes.
7Drain remaining water inside the wash tub.
8The above steps can be repeated.
SPINNING METHOD
SPECIAL FEATURES
A. SOAK FUNCTION (For machines with soak function only)
For heavy stained clothes, Soak wash is useful to achieve better wash result. 15-35 minutes of the
wash timer is for soak wash: (illustrate as follows)
This machine can wash lended lanket (less than 3 kg) marked with the "hand washing"
sym ol. Washing method is as follows:
1Dilute detergent with adequate water (below 50ºC), then pour the solution into the wash tub.
2Fold the blanket as shown in the figure, and put it into wash tub.
B. BUZZER FUNCTION (For machines with uzzer function only)
The buzzer will sound upon with completion of every wash and for controlling certain wash process.
1. The buzzer will sound when washing completes.
3515
about 2
Work Time
B
Total: 35(mins)
(Unit: mins)
about 1.5 about 1.5
about 5 about 5 about 5
Static Time
 Fold in half along
the long edge
 1/3 fold in the same
direction
 Roll up the blanket
 Put into the tub with
blanket edge facing
down
MWM-B1270SA(IM)070915_Layout 1 10/15/15 9:55 AM Page 5

MAINTENANCE TROUBLESHOOTING
1110
CABINET MAINTENANCE
After using the washing machine, wipe the moisture and stain on it with a
piece of soft cloth. To avoid damage to the surface, do not use corrosive or
volatile chemicals.
CLEANING THE LINT FILTER
 Press the button head, and pull the lint filter out.
 Turn the filter net inside out, and rinse it in water.
 After inserting the claw, press the button to insert it into place.
 A sound of “ba” means proper installation.
WHEN OBJECTS ARE DROPPED INTO THE OUTSIDE OF THE SPIN TUB
1. Remove all screws on the frame with a screw driver and loosen the
connector of the brake belt.
2. Pull up the frame with both hands and turn it backwards.
3. Remove the clothes dropped into the outside of the spin tub.
4. Fasten the brake belt connector. Press the frame to reset and
tighten screws.
After you use the washing machine, never forget to do the following
two things:
1. Disconnect the power plug.
2. Remove the water inlet hose.
NOTE:
The washing machine employs alternative current with rated voltage and frequency . When voltage
fluctuates between -10% and 10% of the rated voltage, the machine can work normally.
Connection mode of the power cord of this machine is Y-shaped connection. Users should not detach
or reconnect the wire by themselves. If this part needs to be repaired, please contact your authorised
service center.
 This machine is for cold water connection only. Do not connect to hot water supply.
 Always unplug power plug from the power supply after every use.
 Always use a properly grounded power plug.
 The maximum gradient of the supporting surface for the washing machine should not exceed 2º.
 Do not tear down electrical wires and components in the machine by yourself.
 There are holes on the base for ventilation. These holes should not be blocked by foreign objects
(carpets, etc.).
 Never connect the grounding wire with the live wire, or it may lead to an electric shock.
 If the power cord is damaged, it must be replaced by a qualified person to avoid a hazard.
Button head
Claw
Cabinet
Frame
If the following symptoms occur, disconnect the power plug and perform the following checks:
LIST OF SYMPTOMS AND REASONS
TECHNICAL SPECIFICATIONS
WASH SPIN
Capacity (dry clothes) 7.0kg 3.6kg
Power Supply 240V~ 50Hz
Input Power (lower drain) 320W 125W
Input Power (upper drain) 320W 125W
Maximum Time 15min. 35min. (soak wash) 5min.
Water Volume ( itre) H: 55 M: 46 : 36 /
Maximum Water Pressure 0.6Mpa
Overall Dimension (mm) 735 x 430D x 845H
Net Weight ower Drain System 18kg
Upper Drain System 18.5kg
Pump Input Power 30W
SYMPTOMS REASONS
•Ensure that the power supply is in good condition.
THE WASHING •Ensure that the power plug is inserted properly.
MACHINE DOES •Ensure that the wash timer knob or the spin timer knob is not in the
NOT WORK. "0" position.
THE DRAINAGE •Ensure that the drainage hose is not laid too high.
HOSE DOES NOT •Ensure that the drainage hose is not blocked by foreign matter.
WORK
THERE IS
ABNORMA NOISE •Ensure that there are no coins or any other foreign objects in the wash tub.
DURING WASHING
THERE IS •Ensure that the washing machine is placed on flat, stable floor.
ABNORMA NOISE •Ensure that clothes are evenly distributed in the spin tub.
AND VIO ENT •Ensure laundry inside spin tub is not overloaded or laundry fallen to the
VIBRATION outer side of the spin tub.
DURING SPINNING
MWM-B1270SA(IM)070915_Layout 1 10/15/15 9:55 AM Page 6