Moroso 62260 User manual

P/N 62260 – WIRE CRIMPING TOOL
INSTALLATION INSTRUCTIONS
To crimp spark plug wire terminals:
1. Cut wire to length (add 1” for stripping).
2. Lubricate wire with silicone and slide the proper nipples and boots over the
wire. Be sure to wipe off excess silicone.
3. Strip the ends of wire ½” using the required stripping hole for your application.
4. Fold conductor over wire and insert terminal shank with conductor touching
terminal. Keep stripped conductor out of area where clamp ears meet when
crimped. (Illustration #1)
5. Place wire and terminal in proper crimping position of tool and crimp firmly.
Illustration below demonstrates correct tool use for 90°terminals, and for 180°
terminals.
For Technical Assistance, Call Moroso’s Tech Line at
[phone], 458-0546 8:30am – 5:00pm Eastern Time For Technical Assistance, Call Moroso’s Tech Line at
(
203
)
45
8
-
0542
,
45
8
-
0546 8:30am – 5:00
p
m Eastern Time
P/N 62260 – WIRE CRIMPING TOOL
INSTALLATION INSTRUCTIONS
To crimp spark plug wire terminals:
1. Cut wire to length (add 1” for stripping).
2. Lubricate wire with silicone and slide the proper nipples and boots over the
wire. Be sure to wipe off excess silicone.
3. Strip the ends of wire ½” using the required stripping hole for your application.
4. Fold conductor over wire and insert terminal shank with conductor touching
terminal. Keep stripped conductor out of area where clamp ears meet when
crimped. (Illustration #1)
5. Place wire and terminal in proper crimping position of tool and crimp firmly.
Illustration below demonstrates correct tool use for 90°terminals, and for 180°
terminals.
MOROSO PERFORMANCE PRODUCTS, INC
80 CARTER DR
• GUILFORD, CT 06437
Phone: [phone]
• Fax: [phone]
V i s i t U s A t w w w . m o r o s o . c o m
MOROSO PERFORMANCE PRODUCTS, INC
80 CARTER DR
• GUILFORD, CT 06437
Phone: (203) 453
-
6571
•
Fax: (203) 453
-
6906
V
i s i t U s A t w w w . m o r o s o . c o m REV.B
031811 62260INST
62260INST
REV.B
031811
P/N 62260 – WIRE CRIMPING TOOL
INSTALLATION INSTRUCTIONS
To crimp spark plug wire terminals:
1. Cut wire to length (add 1” for stripping).
2. Lubricate wire with silicone and slide the proper nipples and boots over the
wire. Be sure to wipe off excess silicone.
3. Strip the ends of wire ½” using the required stripping hole for your application.
4. Fold conductor over wire and insert terminal shank with conductor touching
terminal. Keep stripped conductor out of area where clamp ears meet when
crimped. (Illustration #1)
5. Place wire and terminal in proper crimping position of tool and crimp firmly.
Illustration below demonstrates correct tool use for 90°terminals, and for 180°
terminals.
For Technical Assistance, Call Moroso’s Tech Line at
[phone], 458-0546 8:30am – 5:00pm Eastern
Ti
MOROSO PERFORMANCE PRODUCTS, INC
80 CARTER DR
• GUILFORD, CT 06437
Phone:
(
203
)
45
3
-
6571 • Fax:
(
203
)
45
3
-
6906
For Technical Assistance, Call Moroso’s Tech Line at
[phone], 458-0546 8:30am – 5:00pm Eastern Time
P/N 62260 – WIRE CRIMPING TOOL
INSTALLATION INSTRUCTIONS
To crimp spark plug wire terminals:
1. Cut wire to length (add 1” for stripping).
2. Lubricate wire with silicone and slide the proper nipples and boots over the
wire. Be sure to wipe off excess silicone.
3. Strip the ends of wire ½” using the required stripping hole for your application.
4. Fold conductor over wire and insert terminal shank with conductor touching
terminal. Keep stripped conductor out of area where clamp ears meet when
crimped. (Illustration #1)
5. Place wire and terminal in proper crimping position of tool and crimp firmly.
Illustration below demonstrates correct tool use for 90°terminals, and for 180°
terminals.
MOROSO PERFORMANCE PRODUCTS, INC
80 CARTER DR
• GUILFORD, CT 06437
Phone:
(
203
)
45
3
-
6571 • Fax:
(
203
)
45
3
-
6906
V i s i t U s A t w w w . m o r o s o . c o m
REV.B
031811 V i s i t U s A t w w w . m o r o s o . c o m 62260INST
REV.B
031811
62260INST