Morphy Richards Blender & mill User manual

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Blender & millBlender & mill
Blender & millBlender & mill
Blender & mill
Please read and keep these instructions
www.morphyrichards.co.uk
getting the best from your new
blender and mill
Safety first
Theblenderandmillbladesareverysharp,thereforehandlewithcarewhen
usingandcleaning.
Quantities
Donotoverfilltheblender.Refertotheoperatingchartfor quantities and
operatingtimes.
Ensure the blender lid is in place
Whenusingthe blender ensure thelidis in place beforeswitchingon and do
notremove until the blades havestoppedrotating.

2
Important safetyImportant safety
Important safetyImportant safety
Important safety
○○○○○○○○○○○○○○○○○○○○○
instructionsinstructions
instructionsinstructions
instructions
The use of any electrical appliance
requires the following basic common
sense safety rules.
Primarily there is danger of injury or
death and secondly the danger of
damage to the appliance. These are
indicated in the text by the following two
conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the
appliance! In addition we offer the
following safety advice.
○○○○○○○○○○○○○○○○○○○○○
LocationLocation
LocationLocation
Location
•Remove all packaging and retain for
future reference.
•Ensure the blender is used on a
firm, flat surface.
•Do not use the blender outdoors
or in a bathroom.
•Do not place the blender on a
highly polished wooden surface as
damage may occur to the surface.
•Do not place the blender on or
near hot surfaces such as a hot plate
or radiant rings or near a naked flame.
•Do not let the mains lead overhang the
edge of the table or work-top, or touch
hot surfaces.
•DO NOT PLACE THE APPLIANCE ON
OR A NEAR A HOT GAS OR
ELECTRIC HOB, OR IN A HEATED
OVEN.
○○○○○○○○○○○○○○○○○○○○○
ChildrenChildren
ChildrenChildren
Children
•Children do not understand the
dangers associated with operating
electrical appliances. Never allow
children to use this appliance.
○○○○○○○○○○○○○○○○○○○○○
Personal safetyPersonal safety
Personal safetyPersonal safety
Personal safety
•IMPORTANT: THE BLENDER AND
MILL BLADES ARE VERY SHARP.
Handle with care when using and
cleaning.
•Keep hands and utensils out of the
blender when it is switched on.
•Allow hot liquids to cool before
blending, always ensure the lid is fitted
correctly.
•Avoid touching moving parts. Keep
hands, hair, clothing as well as
spatulas and other utensils away from
blender blades during operation, to
prevent personal injury and/or damage
to the appliance.
○○○○○○○○○○○○○○○○○○○○○
Other safety considerationsOther safety considerations
Other safety considerationsOther safety considerations
Other safety considerations
•Disconnect the blender from the mains
supply when not in use, before taking
off attachments, and before cleaning.
•To protect against risk of electric shock
NEVER immerse the blender body
in water or any other liquid and always
ensure the electrical connections are
kept dry.
•Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions or has been
damaged in any manner. Ring the
helpline number for advice on
examination and repair.
•The use of attachments or tools not
recommended or sold by Morphy
Richards may cause fire, electric shock
or injury.
•Do not use abrasive cleaners on the
outside of the blender, they may
scratch the surface. Clean only with a
soft damp cloth.
•Do not use the blender for other than
its intended use.

3
•Do not overfill the blender. This could
cause damage to the motor. The 3A
fuse will blow if the blender is over
loaded. Replace fuse and do not
exceed the maximum recommended
volumes. Refer to the operating chart.
•Do not blend or mill for longer than the
time periods recommended in the
operating chart.
•When using the blender or mill ensure
the lid is in place before switching on
and do not remove the lid until the
blade has stopped rotating.
○○○○○○○○○○○○○○○○○○○○○
Electrical requirementsElectrical requirements
Electrical requirementsElectrical requirements
Electrical requirements
Checkthatthevoltageontheratingplateof
yourappliancecorresponds with your house
electricitysupplywhichmustbeA.C.(Alternating
current).
Ifthesocketoutlets in your home are not
suitablefortheplugsupplied with this appliance
theplugshould be removed and theappropriate
onefitted.
IMP0RTANT : THE PLUG REMOVED FROM
THE MAINS LEAD, IF SEVERED, MUST BE
DESTROYED AS A PLUG WITH A BARED
FLEXIBLE CORD IS HAZARDOUS IF EN-
GAGED INTO A LIVE SOCKET OUTLET.
Shouldthefuse in the 13 ampplugrequire
replacement,a3amp BS1362 fuse must be
fitted.
This appliance is a double insulated
product and it does not require an earth.
○○○○○○○○○○○○○○○○○○○○○
Blender & mill useBlender & mill use
Blender & mill useBlender & mill use
Blender & mill use
Useyourblender for soups, sauces, drinks,
pates,mayonnaise,dressings etc.
Useyour mill for milling herbs,nuts and coffee
beans.
Features of your blenderFeatures of your blender
Features of your blenderFeatures of your blender
Features of your blender
○○○○○○○○○○○○○○○○○○○○○
and mill attachmentand mill attachment
and mill attachmentand mill attachment
and mill attachment
Filler cap
Lid
Jug
Base unit
Cord storage
Control switch
Mill attachment jar
Mill attachment

4
○○○○○○○○○○○○○○○○○○○○○
Operating controlsOperating controls
Operating controlsOperating controls
Operating controls
Theblendercontrolswitchhasthe following
settings.Pulse, off,speed1 and speed 2.
Thespeedcanbeadjustedwhilstthe blender
is in use.
Usingthepulsebuttonallowsgreatercontrol
overthetextureofthefoodproduced. It is only
intendedtobe used for short ‘bursts’ofblending.
○○○○○○○○○○○○○○○○○○○○○
Operating the blenderOperating the blender
Operating the blenderOperating the blender
Operating the blender
Setting up
1Ensuretheblenderbase unit is unplugged
fromthemains.
2Placetheblenderjug onto the base unit
andturn anti-clockwise until the tabson
thejuglock securely into the slotsonthe
baseunit.
3Placethefoodintheblender.
4Placethelid onto the blender.Then put the
fillercap intothe lock position.
Alwaysensuretheblenderlidhas clicked into
place.
5Pluginthe blender and turn thecontrolswitch
to either pulse, speed 1or speed 2
dependingonthedesiredconsistency.Always
operatetheblenderwiththelidinplace.
6Neveroperate the blender withmorethan
1500mlofliquidorwhenempty.
IMPORTANT:
Blender and Mill
Toensure thelonglife of your blender never runit
forlongerthan 60 seconds orthemill for longer
than30seconds. Switch off as soon as youhave
reachedthedesired consistency.
•Don’t process spices they may damage the
plastic.
•The machine will not work if the blender or mill
is fitted incorrectly.
Blender only
•Don’t put dry ingredients into the blender
beforeswitchingon.If necessary, cut them
intopieces;removethefillercap;then,with
themachinerunningdropthepiecesthrough
oneby one.
•Empty regularly
•Don’t use the blender as a storage container.
Keep it empty when not in use.
•Never blend more than 1 litre (1 3/4 pints) -
lessfor frothy liquids such as milk shakes.
Mill only
•Use for dry ingredients only
○○○○○○○○○○○○○○○○○○○○○
Operating the millOperating the mill
Operating the millOperating the mill
Operating the mill
1Putyouringredientsintothemillattachment
jar and fill it no more than half full.
PULSE
CLEAN
OFF
SPEED 1
SPEED 2

5
DO NOT OVER PROCESS FOR LONGER THAN RECOMMENDED TIME
DO NOT EXCEED RECOMMEDED MAXIMUM VOLUMES
Blending/
liquidising Soups,purees, drinks,
milkshakes,
batters
1.5lt 1-2
+pulse 15secs-1min Beginwithlowspeedand
increasetohigh if
required.
Milling Herbs
nuts
coffeebeans
pulse 10 secs -
30 secs
○○○○○○○○○○○○○○○○○○○○○
Operating chartOperating chart
Operating chartOperating chart
Operating chart
2Turnthe mill attachment upside down and
lowerintothemillattachmentjar (blades
down).
3Placethemillattachmentinto the jar and twist
inaclockwisedirection to lock.
4Turnthecorrect way up.
5Placethemill onto the base unit andtwistanti-
clockwiseuntilthe tabs on the milllock
securelyintotheslots on the base unit.
6Switchtheunit on using thecontrolswitch and
select thedesiredcontrolspeed.

6
○○○○○○○○○○○○○○○○○○○○○
Cleaning and storageCleaning and storage
Cleaning and storageCleaning and storage
Cleaning and storage
BEFORE CLEANING, SWITCH OFF AND
UNPLUG THE MAINS LEAD.
Afteruse,fill the blender or mill attachment
withwarmwater and run for 30secondson the
pulsesettingandrepeatasnecessary.Neveruse
abrasivesorcreamcleaners.Cleanthebaseunit
withadampcloth or kitchen paper roll.
NEVER IMMERSE THE BLENDER BASE
UNIT IN WATER.
Aftertheblenderhasbeencleaned,themains
leadcanbewoundroundthestoragearea
underneaththe base unit.
○○○○○○○○○○○○○○○○○○○○○
Hints and tipsHints and tips
Hints and tipsHints and tips
Hints and tips
Whenmakingmayonnaise,putallthe
ingredients,excepttheoil,intotheblender.Then
withthemachinerunning,pourtheoilslowlyinto
theblenderthroughthefillercaphole.
Thickmixtures,eg.patesanddips, may need
scrappingdownwithaspatula(ensurethe
applianceis switched off first). If the mixture is
difficultto process add moreliquid.
Whencrushing ice, add 15ml (1tbsp)water
to6icecubes and operate the blenderinshort
burstsusingpulse setting.
Whenblending pour the liquidsin first and
thenaddthesolidfood.Beginblending at the
lowerspeed and increasewhenneeded.

7
○○○○○○○○○○○○○○○○○○○○○
HelplineHelpline
HelplineHelpline
Helpline
Ifyouhaveanydifficultywith your appliance,
donothesitateto call us. We’remorelikelyable
tohelpthanthestorefrom where you bought it.
Pleasehave the following informationreadyto
enableourstaffto deal with your query quickly.
•Name of the product
•Model number as shown on the
underside of the appliance.
•Serial number as shown on underside
oftheappliance.

our two year
○○○○○○○○○○○○○○○○○○○○○○
guarantee
•It is important to retain the retailers
receipt as proof of purchase.Staple your
receipt to this back cover for future reference.
Pleasequotethe followinginformation ifthe
productdevelops afault. Thesenumbers can
befound on thebase of the product.
ModelNo. SerialNo.
AllMorphy Richardsproductsare individually
tested before leaving the factory. In the unlikely
eventofany applianceproving tobe faultywithin
28 days of purchase it should be returned to the
placeof purchase forit tobe replaced.
Ifthe fault developsafter 28 daysand within
24months oforiginal purchase,you should
contacttheHelpline numberquotingModel
numberand Serialnumber onthe product,or
writeto MorphyRichards at theaddress shown.
You willbe asked to returnthe product (in
secure,adequatepackaging) tothe address
belowalong witha copy ofproof of purchase.
Subjectto theexclusions setout below (see
‘Exclusions’)the faultyappliancewill thenbe
repairedorreplaced anddispatchedusually
within7 working daysof receipt.
Iffor any reasonthis item isreplaced during
the2year guaranteeperiod,the guaranteeon
thenew itemwill becalculated fromoriginal
purchasedate. Thereforeit isvital to retainyour
originaltill receiptor invoice toindicate thedate
ofinitialpurchase.
Toqualifyfor the2 yearguaranteethe appliance
musthave beenused accordingto themanu-
facturersinstructions. Forexample kettles
shouldhavebeenregularly descaled.
EXCLUSIONS
MorphyRichardsshall notbeliable toreplace
orrepair the goodsunder the termsof the
Guaranteewhere:
1 Thefault hasbeen causedor isattributable
toaccidental use,misuse, negligentuse or
usedcontrary tothe manufacturers
recommendationsorwhere thefault has
beencausedby powersurges ordamage
causedin transit.
2 Theappliancehas beenusedon avoltage
supplyother thanthat stampedon the
products.
3 Repairshavebeen attemptedbypersons
otherthan ourservice staff(or authorised
dealer).
4 Wherethe appliancehas beenused forhire
purposesornon-domestic use.
5 MorphyRichards arenot liableto carry out
any typeof servicingwork, under the
guarantee.
6 Plasticfilters for allMorphy Richards kettles
andcoffeemakers arenot coveredby the
guarantee.
Thisguarantee doesnot conferany rights
otherthan those expresslyset outabove and
doesnot cover anyclaims forconsequential
lossor damage.Thisguarantee isofferedas an
additionalbenefit anddoesnot affectyour
statutory rights as a consumer.
•This guarantee is valid in the UK and Ireland
only.
The After Sales Division,
Morphy Richards Ltd, Mexborough,
South Yorkshire, England, S64 8AJ
Helpline (office hours)
UK 0870 060 2612
Republic of Ireland 1800 409119
Morphy Richards products are
intended for household use only.
Morphy Richards has a policy of
continuous improvement in product
quality and design.
The Company, therefore, reserves
the right to change the
specification of its models at any time.
444/8502/84 Rev 2