Morphy Richards MRHBS8BK User manual

INSTRUCTION MANUAL
Model: MRHBS8BK
Read these instructions carefully before
using this appliance for the rst time
STORE THESE INSTRUCTIONS CAREFULLY
Hand Blender Set
Lock
Lock
For product hints and tips plus more join us at
facebook.com/MorphyRichardsAUS instagram.com/morphyrichardsau
www.morphyrichards.com.au

2
Model: MRHBS8BK
Colour: Black
Rated Voltage: 220-240V~ 50-60Hz
Rated Power: 800W
Blender Dimensions (W x D x H): 63.5 x 63.5 x 397mm
Net Weight: 1.137kg
NAMES OF PARTS AND ACCESSORIES
SPECIFICATIONS
Lock
Lock
Blender Body
Chopper
Blender Shaft
Whisk Measuring Cup

3
WARNING
To reduce the risk of fire, electric shock, injury to persons or
damage to property, follow basic precautions including the
following:
• If the power cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person
in order to avoid a hazard.
• Keep the appliance and its cord out of reach of children.
• WARNING: Misuse of appliance could cause personal injury.
• This appliance is not intended to be operated by means of an
external timer or a separate remote-control system.
• This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities or lack of experience
and knowledge unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play
with this appliance.
• In the absence of supervision, the cleaning and maintenance
work should not be done by a child.
• Use of accessories not recommended or sold by the original
manufacturer may cause risks of fire, electric shock or
personal injury.
• This appliance must be used in accordance with the
instructions and must not be used for other purposes.
• This appliance is intended to be used in household and similar
applications such as:
IMPORTANT SAFETY INSTRUCTIONS

4
- staff kitchen areas in shops, offices and other working
environments;
- farm houses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments.
Location
• For indoor use only. Do not use outdoors or near water.
• The appliance and accessories should be positioned in a
stable situation.
Power cord
• The power cord should reach from the socket to the blender
without straining the connections.
• Remove the plug from the socket, grasp the plug and pull out
the power cord, do not pull on the cord.
• Do not let the cord hang over the edge of the table or counter
and keep it away from any hot surfaces.
• Do not let the cord run across an open space e.g. between a
low socket and table.
• WARNING: This appliance should NOT be used with extension
leads and/or power boards.
Personal safety
• Always disconnect the blender from the supply if it is left
unattended and before assembling, disassembling or cleaning.
• WARNING: To protect against fire, electric shock and personal
injury, do not immerse cord, plugs, or appliance in water or
other liquid.
• Do not operate any appliance with a damaged lead or plug, or

5
after an appliance has malfunctioned, or has been dropped or
damaged in any way.
• Avoid contact with moving parts. Keep hands and utensils out
of containers while blending to reduce the risk of severe injury
to persons or damage to the blender. A scraper may be used
but must only be used when the blender is not operating.
• Do not use any of the appliance parts in a microwave or on
any cooking/heated surfaces.
• Do not place on or near a hot gas or electric burner, or in a
heated oven.
• To reduce the risk of injury, never place cutting blade on base
without first putting the bowl properly in place.
• Ensure the chopper lid is securely locked in place before
operating appliance.
• Before removing the lid from the chopper, release the button
and unplug the appliance and wait until the blades have come
to a complete stop.
• Always remove the blade assembly before pouring contents
from measuring cup or chopper accessory.
• Be sure to switch off the blender after each use and make sure
the motor stops completely before disassembling.
• WARNING: The blender blades and chopper blades are
extremely sharp, please handle with care.
• When handling and cleaning the blade, always hold the blade
stem instead of the cutting edge.
• When using the chopper accessory, always disassemble the
motor unit from the chopper lid first and then remove the
chopper lid. Never remove the chopper lid with the motor unit
attached.

6
Treating scalds
• Be careful if blending hot liquid, as it can be ejected.
• Run cold water over the affected area immediately. Do not
stop to remove clothing, get medical help quickly.
Electrical requirements
• Check that the voltage on the rating plate of your appliance
corresponds with your house electricity supply which must be
A.C.
• WARNING: This appliance should NOT be used with extension
leads and/or power boards.
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

7
Lock
Lock
HAND BLENDER PARTS
Speed Dial
Low speed button
Turbo button
Motor Unit
Blender Shaft
Blades

8
USING THE HAND BLENDER
• To avoid damage to the motor, it is recommended that the
blender only operates continually for a minute and then
allowed to cool for up to 3 minutes before restarting.
• To assemble the detachable shaft to the motor unit, rotate
the shaft in an anti-clockwise direction until tightened. To
disassemble, rotate in a clockwise direction.
• Plug the power cord into the power socket.
• Lower the blender blade assembly into the food, then press
and hold the low speed button or turbo button to start
operating.
• To stop the blender, simply release the low speed button or
turbo button.
• Note: There is a stepless speed dial on the top of the blender.
By rotating this dial clockwise increases speed, and anti-
clockwise will decrease speed. The speed dial is only effective
after pressing the low speed button. Once the turbo button is
activated, the speed dial is ineffective.
USING THE HAND BLENDER WITH ICE
• The blender can be used for a moderate amount of ice
crushing with a little water added to the ice to help keep the
blade moving. Long term ice crushing without water added will
cause damage to the blades and reduce the efficiency of the
appliance.

9
Lock
Lock
USING THE CHOPPER ACCESSORY
The chopper accessory is ideal for grinding meat, making
pastes and chopping ingredients.
• WARNING: The blade assembly is extremely sharp and
caution should be taken when cleaning or assembling the
chopper.
• The chopper bowl should only be used for the blending of food
and not storage. After use, it is recommended to clean this as
soon as possible.
• Wash all accessories in warm soapy water and dry before
using.
• To avoid damage to the motor, it is recommended that the
blender only operates continually for a minute and then
allowed to cool for up to 3 minutes before restarting.
Blade Assembly
Bowl
Lid
Motor Unit

10
• Assemble the stainless steel chopping blade into the chopper
bowl, as shown below:
USING THE CHOPPER ACCESSORY
• Place food into the chopper bowl.
• Note: Food should be cut into smaller pieces before using the
chopper as the capacity of the chopper bowl is 200g.
• Push the lid firmly onto the chopper bowl. To remove the lid,
pull the lid up carefully to avoid spillage.
• Insert the motor unit into the hole of the chopper lid.
• Plug the power cord into the power socket.
• Press and hold the low speed button or turbo button to start
operating. To stop the blender, simply release the low speed
button or turbo button.
• After finishing chopping, unplug the power cord and remove
the motor unit from the chopper lid. Pull the lid up to remove.
Lock
Lock