Morphy Richards 47060 User manual

g
∂
10/12 cup filter coffee maker
Please read and keep these instructions
Kávovar s filtrem na 10/12 šálků
Přečtěte si tyto pokyny a uschovejte je
Models Covered:
47060- Man al Interface
47061- Digital Interface
47062- Man al Interface & Thermal carafe
47063- Digital Interface & Thermal carafe
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 1

2
Getting the best fr m y ur
new c ffee maker...
WARNING: Hot water and steam
Safety first
Caution must be used when
handling hot water, coffee or steam.
Run water through your
machine before first use
It is important to run water through
your coffee maker in order to rinse
the machine. You can also run water
through to warm your coffee
machine.
Descale as appropriate for the
hardness of the water in your
area
It is important to descale as the
performance of your coffee maker
may be impaired by limescale and
other impurities in the water supply.
Imp rtant safety
instructi ns
The use of any electrical appliance
requires the following common
sense safety rules.
Primarily there is danger of injury or
death and secondly the danger of
damage to the appliance. These are
indicated in the text by the following
two conventions:
WARNING: Danger to the
person!
IMPORTANT: Damage to the
appliance!
In addition we offer the following
safety advice.
L cati n
• Remove all the packaging and
retain for future reference.
• Ensure the coffee maker is used on
a firm, flat surface.
• Do not use the coffee maker
outdoors or in a bathroom.
•Do not place the coffee maker on a
highly polished wooden surface as
damage may occur to the surface.
• Do not place the coffee maker on or
near hot surfaces such as a hot
plate, radiant rings or near a naked
flame.
•WARNING: Do not place the
coffee maker onto a metal tray
or metal surface whilst in use.
Other safety
c nsiderati ns
• Disconnect the coffee maker from
the mains supply when filling,
cleaning or not in use.
• When unplugging, turn any control
to ‘off’, then remove the plug from
the wall socket.
• eep the outside of the coffee
maker area clean and dry at all
times.
• Do not touch hot surfaces. Always
use handles or knobs on the coffee
maker.
• Do not immerse the coffee maker
itself in water and always ensure the
electrical connections are kept dry.
• Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions or has been
damaged in any manner. Ring the
helpline number for advice on
examination and repair.
• The use of attachments or tools not
recommended or sold by Morphy
Richards may cause fire, electric
shock or injury.
• Do not use the coffee maker for
anything other than its intended
purpose.
Pr duct safety
• Never use warm or hot water to fill
the water reservoir.
• Do not overfill the water reservoir.
g
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 2

3
Pers nal safety
• Ensure the lid of the glass jug is
securely in place before pouring.
• Take care to pour hot coffee slowly
and carefully without tipping the
glass jug too fast.
• Do not fill above the capacity mark
of the water level gauge marked on
the jug.
• Do not use the glass jug in a
microwave.
•Milk should not be reheated, only
heat it when required.
• When heating milk, please use the
stainless steel jug provided.
• Do not fill the milk jug above the
MAX mark.
• Do not touch metal parts until the
unit has cooled.
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children
• Children do not understand the
dangers associated with operating
electrical appliances. Never allow
children to use this appliance.
• Children should be supervised to
ensure that they do not play with
the appliance.
Treating scalds
• Run cold water over the affected
area immediately. Do not stop to
remove clothing, get medical help
quickly.
Ch ice f c ffee
• Choose a finely ground espresso
coffee to use with this machine.
Note: Avoid blends that are very
powdery. When the coffee is too
finely ground it may block the filter.
Electrical requirements
Check that the voltage on the rating
plate of your appliance corresponds
with your house electricity supply
which must be A.C. (Alternating
Current).
If the socket outlets in your home
are not suitable for the plug
supplied with this appliance the
plug should be removed and the
appropriate one fitted.
WARNING: The plug removed
from the mains lead, if severed,
must be destroyed as a plug
with a bared flexible cord is
hazardous if engaged into a live
socket outlet.
Where used, should the fuse in the
13 amp plug require changing, a 13
amp BS1362 fuse must be fitted.
WARNING: This appliance must
be earthed.
g
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 3

4
Features
⁄Measuring spoon storage area
¤Water re-fill point
‹Measuring spoon
›Filter holder and permanent
mesh filter
fiLid opening push button
Milk frother steel jug
‡12/15 cups glass coffee jug
·8/10 cups steel thermal
coffee jug
‚Manual interface (see overleaf)
„Digital interface (see overleaf)
‰Frother control
ÂMilk hot plate switch
ÊIlluminated water level indicator
ÁCoffee strength control
ËPlug storage
ÈAnti drip
ÍLid release
ÎHot plates (on certain models)
⁄
¤
‹
Â
fi
‡ / ·
Ê
‚ / „
‰
›
Á
Ë
È
Í
Í
Î
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 4

‚Manual interface version
ÏFunction selector
Ì1/2 carafe indicator
Ó1 carafe indicator
ÔPower on indicator
Auto keep warm indicator
ÒMilk frother device on indicator
ÚMilk hot plate on indicator
5
g
/2
1
1
Ï
ÌÓ

Ò
Ú
Ô
Û
Ù
¯
˘
◊
ı
ˆ

ÚÒ˜
„Digital interface version
Auto keep warm indicator
ÒMilk frother device on indicator
ÚMilk hot plate on indicator
ÛPower on/off selection push
button
ÙProgramme selection push
button
ıAuto function push button
ˆHour function push button
˜Minute function push button
¯Cup selector push button
˘Quality and brew indicator
◊Programming mode indicator
&Automatic timer function
indicator
(Cup selection indicator
)24 hour clock
Milk hot plate on pilot light
Milk frother device on pilot light
1/2 carafe light
1 carafe light auto
Milk frother device off pilot light
Auto keep warm light
Power on/off
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 5

6
OPERATING THE
APPLIANCE
Bef re use
Before using your coffee maker for
the first time or if you have not used
it for some time, rinse the machine
by running water through. Follow
the procedure for making coffee,
without coffee in the filter holder.
The product that you have
purchased is available in four
different versions:
• Manual version - Glass carafe
• Manual version - Thermal carafe
• 24 hour automatic timer version -
Glass carafe
• 24 hour automatic timer version -
Thermal carafe
For the complete understanding of
how to use your machine please
refer to the specific section related
to your version.
Please note not all variants are
available in all countries, please
contact your retailer for more
information.
MANUAL INTERFACE
VERSIONS ‚
Making c ffee
1Press the push button fito open
the hinged lid. The lid will
automatically rise.
2Using a jug, fill the water reservoir
¤with the required amount of
water using the level indicator Êas
a guide. Both the jug and water level
indicator are marked in cups A.
3Spoon ‹the required amount of
ground filter coffee into the mesh
filter ›spreading evenly. We
suggest one level measuring spoon
for every cup. Ensure the filter is
sitting properly in the filter holder B.
4Close the lid. Ensure the lid is
closed and latched properly C,
otherwise the machine will not
function correctly.
5Slide the jug ‡/· into the coffee
maker ensuring it sits correctly on
the hot plate D. The jug lid must be
in place during the brewing process;
otherwise the non drip valve will not
open, causing the filter to flood.
•Thermal Carafe ariant
NOTE:
Thermal carafe versions have no hot
plate. Please ensure the jug sits
correctly on the base recess.
• Ensure the jug ·lid is fully closed
by turning the lid clockwise, this
ensures the maximum temperature
is maintained in the jug. To ensure
the coffee is kept as warm as
possible we advise you rinse your
thermal carafe in hot water before
use.
• Please note the jug lid must be in
place during the brewing process;
otherwise the non-drip valve will not
open, causing the filter to flood.
6Select the required strength of
coffee using the strength selector
on the lid E.
7Plug the filter coffee maker in at the
wall socket and switch on. Rotate
the dial Ïto select one of the two
on positions available: 1/2 carafe or
a full carafe,Fdepending on the
number of cups required. Refer to
‘Cup selection function’ page 11 for
further information.
8The cup selection indicator and the
power on indicator Ôwill light up.
The hot water will start to flow
through the coffee grounds and into
the jug as coffee for you to enjoy.
•Glass Carafe ariant
When the brewing process is
complete the product will
automatically switch to keep warm;
the auto keep warm indicator will
light up.
The automatic keep warm function
will keep the coffee warm in the
carafe until the product is switched
off.
For safety reasons the coffee maker
will automatically switch off after
two hours.
A
B
C
D
E
F
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 6

7
The anti-drip valve Èwill prevent
any remaining coffee dripping onto
the hot plate during serving. Ensure
that the jug is replaced on the hot
plate after serving.
We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
WARNING: The coffee maker
and hot plates are hot and
remain hot for some time after
switching off.
NOTE:
• Remember to turn off the machine
when you have finished.
• Allow the unit to cool.
• Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
•Thermal Carafe ariants
• When the brewing process is
complete the product remains on,
we recommend you switch off your
coffee maker as soon as brewing is
complete.
• The thermal carafe will keep the
coffee warm in the jug for up to
‡/· four hours.
• The anti drip valve Èwill prevent
any remaining coffee dripping onto
the base recess during serving.
• We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
•WARNING: The coffee maker
and hot plates are hot and
remain hot for some time after
switching off.
NOTE:
• Remember to turn off the machine
when you have finished.
• Allow the unit to cool.
• Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
DIGITAL INTERFACE
VERSIONS „
Set the cl ck
•When the machine is plugged in,
the display will flash 12:00 dimly.
• To set the time press the hour
button ˆand minute buttons ˜to
reach the desired time.
NOTE:
The clock is a 24 hour clock.
The clock will be reset, each time
the product is unplugged at the
wall.
Making c ffee
1Press the push button fito open
the hinged lid. The lid will
automatically rise G.
2Using the jug, fill the water reservoir
¤with the required amount of
water using the level indicator Êas
a guide. Both the jug and water level
indicator are marked in cups H.
3Spoon ‹the required amount of
ground filter coffee into the mesh
filter ›spreading evenly. We
suggest one level measuring spoon
for every cup. Ensure the filter is
sitting properly in the filter holder I.
4Close the lid. Ensure the lid is
closed and latched properly, J
otherwise the machine will not
function correctly.
5Slide the jug ‡/· into the coffee
maker ensuring it sits correctly on
the hot plate K. The jug lid must be
in place during the brewing process;
otherwise the non drip valve will not
open, causing the filter to flood.
•Thermal Carafe ariant
NOTE:
Thermal carafe versions have no hot
plate. Please ensure the jug sits
correctly on the base recess.
• Ensure the jug ·lid is fully closed
by turning the lid clockwise, this
ensures the maximum temperature
is maintained in the jug. To ensure
the coffee is kept as warm as
possible we advise you rinse your
thermal carafe in hot water before
use.
g
G
H
I
J
K
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 7

8
•Please note the jug lid must be in
place during the brewing process;
otherwise the non-drip valve will not
open, causing the filter to flood.
6Select the required strength of
coffee using the strength selector
on the lid L.
7Press the power on/off selection
button Û. The display lights up
brightly and the cup selection
indicator will flash showing the
previous selection.
NOTE:
If the machine has been unplugged
from the wall socket since the last
operation the previous selection will
be cleared, the default setting will
be applied (1 full carafe).
8Press the cup selection button ¯to
select one of the available options,
1/2 carafe or full carafe M
depending on the number of cups
required. Refer to ‘Cup selection
function’ page 11 for further
information. The selection indicator
will stop flashing, if no buttons are
pressed for 2 seconds the machine
will begin the brewing process.
9The brewing indicator ˘will start to
illuminate from left to right indicating
that brewing is in progress, hot
water will start to flow through the
coffee grounds and into the jug as
coffee ·.
•Glass Carafe ariant
When the brewing process is
complete the product will
automatically switch to keep warm
; the brewing indicator ˘will
stop illuminating from left to right.
All segments will remain solidly
illuminated indicating the machine is
in keep warm state. The indicator
has now changed from a brewing
indicator to a quality indicator. Refer
to ‘Coffee Quality indicator’ page 11
for further information.
The automatic keep warm 
function will keep the coffee warm
in the carafe until the product is
switched off.
For safety reasons the coffee maker
will automatically switch off after
two hours.
The anti-drip valve Èwill prevent
any remaining coffee dripping onto
the hot plate during serving. Ensure
that the jug is replaced on the hot
plate after serving.
We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
WARNING: The coffee maker and
hot plates are hot and remain hot
for some time after switching off.
NOTE:
• Remember to turn off the machine
when you have finished.
• Allow the unit to cool.
• Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
•Thermal Carafe ariant
When the brewing process is
complete the product remains on,
the brewing indicator ˘will stop
illuminating from left to right, all
segments will remain solidly
illuminated, the indicator has now
changed from a brewing indicator to
a quality indicator. Refer to ‘Coffee
Quality indicator’ page 11 for further
information.
If the coffee is to be consumed
immediately we recommend
switching off your coffee maker as
soon as brewing is complete.
NOTE:
If you switch off your coffee maker
the coffee quality indicator will turn
off and reset.
The thermal carafe will keep the
coffee warm in the jug for up to four
hours.
For safety reasons the coffee maker
will automatically switch off after
two hours.
The anti drip valve will prevent any
remaining coffee dripping onto the
base recess during serving.
We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
L
M
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 8

9
WARNING: The coffee maker
and hot plates are hot and
remain hot for some time after
switching off.
NOTE:
• Remember to turn off the machine
when you have finished.
•Allow the unit to cool.
•Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and
thoroughly.
Set the aut matic timer
functi n
NOTE:
The timer function can be set when
the coffee maker is brewing or when
it is in standby.
1Press the programme button Ù.
The display will change to show the
previous set time and cup selection
flashing. If no previous setting has
been made or the machine has
been unplugged from the socket
since the last setting the default
setting will be shown; 12:00 and full
carafe.
2Select ¯the desired number of
cups that want to be brewed, 1/2 or
full carafe (see cup selection
function on page 11). The cup
selector indicator will stop flashing.
3Press the hour and minute ˜
buttons to set the desired time. The
start time will stop flashing.
NOTE:
The programming mode indicator
continues to flash to show the
display is still in programming
mode.
4If the programme button Ùis
pressed again or if no buttons are
pressed within 5 seconds the cup
selection setting and the start time
are memorised.
5To activate the automatic timer
function press auto button ı.
• The display will change to show the
programmed time and cup selection
setting for 5 seconds. The display
will then change to show the time,
the automatic timer function
indicator will illuminate to show the
automatic timer function is set.
• With the automatic function
activated the coffee maker will turn
on at the desired time and start to
brew the coffee.
NOTE:
If the auto button ıis pressed
during the brewing process the
machine will switch off and the
automatic timer function will be
activated.
If setting the automatic timer
function during the brewing
process, wait until the process is
complete before pressing the auto
button.
6Press the auto button ıagain to
cancel the automatic function, the
timer function indicator will
disappear. The machine will keep in
the memory the cup selection
setting and the start time until it is
unplugged from the mains socket.
7To change the start time and the
number of cups repeat steps 1-5.
WARNING: Remember to fill the
water tank with water and the
filter with coffee before
activating the auto function.
NOTE:
The clock is a 24 hour clock.
If no buttons are pressed, the
display will revert to the time display
within 5 seconds.
Fr thing milk
It is advised to start heating your
milk ready for frothing when you
start making the coffee. This helps
to ensure the milk reaches its
optimum frothing temperature.
1Fill the stainless steel jug with
the required amount of milk. Do not
exceed the maximum level.
2Place the jug on the hot plate Î N
and push the frother hot plate Â
ON/OFF switch to the ‘ON’ O
position, the hot plate indicator will
light up.
g
N
O
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 9

10
3Once the coffee is brewed (and the
auto keep warm indicator lights
up) the milk is ready to froth.
4Engage the frother system by
turning the frother control lever P
‰to the right, the motor will start
automatically and the milk frother
device on indicator will illuminate Ò.
Frothing should take between 30-60
seconds.
NOTE:
Frothing time can vary depending
on the type of milk used and its
starting temperature. We
recommend to use semi skimmed
milk from the fridge.
5Disengage the frother system from
the jug by turning the frother control
lever to the left Q ‰, the motor will
stop automatically. Push and
release the milk hot plate switch to
turn off the hot plate Â.
WARNING: Take care the milk
will be very hot.
Remove the milk jug from the hot
plate and press the lid release button
Íto disengage the lid. The lid
assembly can be removed for easy
pouring and spooning off the milk.
NOTE:
The lid can be turned upside down
and rest on the work surface. The
inner lid is shaped to collect any
dripping milk and froth for minimal
mess.
Pour the coffee into the cups and
then gently pour or preferably spoon
the milk onto the coffee.
WARNING: The stainless steel
jug and the hotplate will remain
hot for sometime after switching
the machine off.
NOTE:
The milk frother jug and lid can be
disassembled for easy cleaning.
It is recommended that you
disassemble and clean the milk
frother jug and its components
immediately after use, as dried milk
can be difficult to remove.
NOTE:
All milk jug and coffee jug
components are dishwasher safe for
easy cleaning.
Cup selecti n functi n
1This machine has a special selector
that maintains the quality of coffee
brewed in relation to the number of
cups selected.
There are two options available:
•1/2 carafe
(1-6 cups - Glass jug)
(1-4 cups - Thermal jug)
•1 carafe
(7-12 cups - Glass jug)
(5-8 cups - Thermal jug)
2The selection needs to be set in
relation to the amount of water in
the water tank and the amount of
coffee powder in the filter.
3The incorrect selection of this
function will not affect the
functionality of the machine
however the quality and taste of the
coffee brewed will be affected.
4If you find the strength selector
does not provide a weak or strong
enough cup of coffee to suit your
taste, the cup selection function can
be used in conjunction to achieve a
stronger or weaker cup of coffee.
• The table below shows the settings
to use in relation to the volume of
water in the tank to help achieve a
stronger or weaker coffee. Feel free
to experiment with different settings
until you achieve the desired
strength of coffee to suit your own
personal taste.
C ffee quality indicat r
The coffee quality indicator will
show the quality of the coffee in the
carafe in relation to the time since
brewing was completed. Quality of
the coffee is a personal choice. The
quality indicator gives an indication
of the quality and taste of coffee
after the brewing process is
complete.
It is not absolute and can differ due
to personal taste, or type of coffee
used.
P
Q
1-6
1-4
7-12
5-8
1/2 Standard Stronger
1Weaker Standard
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 10