Morphy Richards MRFW15WT User manual
Model: MRFW15WT
INSTRUCTION MANUAL
Read these instructions carefully before
using this appliance for the rst time.
STORE THESE INSTRUCTIONS CAREFULLY
Electric Foldable Food Warmer with
Hot Plate
For product hints and tips plus more join us at
facebook.com/MorphyRichardsAUS instagram.com/morphyrichardsau
www.morphyrichards.com.au
IMPORTANT REMINDER: PLEASE MAKE SURE THE UNIT IS FULLY UNFOLDED BEFORE
OPE RATING. D O NOT FOL D THE UNI T WHILE I T IS IN USE .
IMPORTANT REMINDER: PLEASE MAKE SURE THE UNIT IS FULLY UNFOLDED BEFORE
OPE RATING. D O NOT FOL D THE UNI T WHILE I T IS IN USE .
2
WARNING
To reduce the risk of fire, electric shock, injury to persons or
damage to property, follow basic precautions including the
following:
• WARNING: Do not touch hot surfaces.
• WARNING: Misuse of appliance could cause personal injury.
• WARNING: Do not leave the appliance unattended while
operating.
• WARNING: Do not use the appliance if the surface is cracked
or broken.
• Make sure to remove all paper and cardboard before first use.
• To protect against electric shock, do not immerse power cord,
plug, or appliance in water or other liquid.
• Keep the appliance and its cord out of reach of children.
• This appliance is not intended to be operated by means of an
external timer or a separate remote-control system.
• This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities or lack of experience
and knowledge unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play
with this appliance and children should be watched carefully
to avoid scalding them.
• In the absence of supervision, the cleaning and maintenance
work should not be done by a child.
IMPORTANT SAFETY INSTRUCTIONS
3
• Use of accessories not recommended or sold by the original
manufacturer may cause risks of fire, electric shock or personal
injury.
• This appliance must be used in accordance with the instructions
and must not be used for other purposes.
• Metal objects, such as knives, forks, spoons and covers should
not be placed on the surface because they may become hot.
• Do not store any packing material, cardboards or plastic while
the appliance is not in use.
• Make sure the knobs are turned off before disconnecting the
appliance.
• This appliance is intended to be used in household and similar
applications such as:
- staff kitchen areas in shops, offices and other working
environments;
- farm houses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments.
• Appliance must be used unfolded. Do not power on the unit
when folded. The appliance will shut off automatically if the
panels are folded more that 90° during operation.
• This appliance shall not be used for clothes, heating or other
purposes except cooking food.
• Only use with stainless steel, die-cast aluminium & foil
cookware on the high temperature hot plate zone.
• Do not fold the product within 10 minutes after using the electric
ceramic hot plate zone.
• Do not heat food directly on the surfaces.
IMPORTANT SAFETY INSTRUCTIONS
4
Location
• For indoor use only. Do not use outdoors or near water.
• Inflammable and explosive objects should not be placed near
the appliance.
• The appliance should be positioned on a horizontal table top
heat-resistant surface away from water.
• Keep the appliance away from non heat-resistant materials such
as carpet, table, cloth, disposable table cloth, tissue paper and
plastic.
Power Cord
• WARNING: This appliance should NOT be used with extension
leads and/or power boards.
• The power cord should reach from the socket to the appliance
without straining the connections.
• Remove the plug from the socket, grasp the plug and pull out
the power cord, do not pull on the cord directly.
• Do not let the cord hang over the edge of the table or counter
and keep it away from any hot surfaces.
• Do not let the cord run across an open space e.g. between a
low socket and table.
• If the power cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person
in order to avoid a hazard.
• The power cord should be placed under the machine body
during use, otherwise the power cord may be damaged or an
accident may occur.
IMPORTANT SAFETY INSTRUCTIONS
5
Personal Safety
• WARNING: Do not use the appliance if surface is cracked or
broken.
• WARNING: Turn off the appliance if surface is cracked or broken
to avoid electric shock.
• WARNING: Do not place the metal objects such as knives, forks
and spoons on the surface on the appliance it may become hot.
• WARNING: Do not put more than 5kg on the appliance to avoid
the crack on the heating surface.
• WARNING: The surface temperature of the hot plate area is
high, please use with caution.
• Unplug from outlet when not in use and before cleaning. Allow
to cool completely before removing or adding parts, and before
cleaning the appliance.
• Do not operate any appliance with a damaged lead or plug, or
after an appliance has malfunctioned, or has been dropped or
damaged in any way.
• Do not use plastic, paper, aluminium or cloth on the heating
surface. Only use metal containers on the cooking area.
Treating Scalds
• Run cold water over the affected area immediately. Do not stop
to remove clothing, seek medical advice quickly.
IMPORTANT SAFETY INSTRUCTIONS
6
Electrical Requirements
• WARNING: This appliance should NOT be used with extension
leads and/or power boards.
• Check that the voltage on the rating label of your appliance
corresponds with your house electricity supply which must be
A.C.
• Ensure the grounding wire is properly grounded to avoid
leakage.
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
CAUTION: HOT SURFACE
PLEASE BE AWARE OF HOT SURFACES
HANDLE WITH CARE
IMPORTANT SAFETY INSTRUCTIONS
7
Model: MRFW15WT
Colour: White
Rated Power: 1400W
Rated Voltage & Frequency: 220-240V~ 50-60Hz
Warming Panels Temperature Settings: 3
Warming Panels Temperature Range: 80°C-120°C
Hot Plate Temperature Settings: 7
Hot Plate Temperature Range: 150°C-500°C
Timer Settings: 3
Dimensions (W x D x H): 680 x 420 x 32mm
Net Weight: 3.68kg
PRODUCT OVERVIEW
SPECIFICATIONS
IMPORTANTREMI
NDER:P
LEASEMAKESURETHEUNITI
SFULLYUNFOLDEDBEFORE
OP
ERATI
NG.D
ONOTFOLDTHEUNITWHI
LEI
TI
SI
NUSE.
IMPORTANTREMINDER:P
LEASEMAKESURETHEUNITI
SFULLYUNFOLDEDBE
FORE
OPERA
TI
NG.
D
ONOTFOLDTHEUNITWHI
LEI
TI
SI
NUSE.
Warming Panel
Electric Ceramic Hot Plate
Control Box
Hinge
Hinge
Warming Panel
8
CONTROL BOX
Display
Hot Plate Operation Area
Decrease Increase
Hot Plate Mode
Timer
Warmer Mode
Power Button
Timer
Warmer Temperature
Child Lock
Warmer Operation Area
Warmer Temperature
Display
Warmer Timer
Display
9
CONTROL BOX
Power Button
1. After the power is turned on, the power button will flash.
2. Press the power button to activate the product to enter the
standby mode.
3. If there is no further operation within 60 seconds, it will return to
the power on mode.
4. Press the power key again to return to the standby mode.
Child Lock
1. To activate the child lock, press and hold the child lock button
for 2 seconds in the standby mode (the child lock key will
illuminate).
2. To deactivate the child lock, press and hold the child lock key
again for 2 seconds (the child lock key light will turn off).
3. To turn off the warmer while the child lock is activate, long
press the power key for 2 seconds.
HOT PLATE OPERATION AREA
NOTE: The product is equipped with a high temperature electric
ceramic hot plate in the centre of the middle panel (see product
overview diagram on page 7). This zone is designed to be used
with stainless steel, die-cast aluminium & foil cookware only.
Hot Plate Mode Button
1. Press and hold the Hot Plate Mode button to start heating
the cooking zone. The unit starts heating in default temperature
setting P1 (150°C). The cooking zone has seven temperature
settings from P1 (150°C) to P7 (500°C) and can be adjusted by
pressing the Increase or Decrease buttons.
10
2. The default time for the Hot Plate mode in P1 is 45 minutes. This
can be adjusted by pressing the timer icon and then increasing
or decreasing using the +or -buttons while the timer button and
time remaining flashes. See Timer Button section below.
WARNING: The surface temperature of the hot plate area can be
extremely hot, please use with caution.
Increase Button
Press the +button to increase the cooking temperature setting
or press the timer button and while it flashes, press the +key to
increase the cooking reservation time.
To pause cooking, press the cooker mode button again.
Decrease Button
Press the -button to decrease the cooking temperature setting
or press the timer button and while it flashes, press the -key to
decrease the cooking reservation time.
Timer Button
Press the timer button to display the current working time. You can
adjust the remaining time by pressing the Increase or Decrease
buttons while the timer button and time remaining flashes. The
default time for the Hot Plate mode in P1 is 45 minutes.
CONTROL BOX
Timer Range
(hh:mm)
Temp
Settings
Increase / Decrease Button
Short Press Press + Hold
0:01 - 4:00 P1 - P3 +/- 1min
increment/
decrement
+/- 10 mins
increment/
decrement
0:01 - 2:00 P4 - P7
11
CONTROL BOX
WARMER OPERATION AREA
NOTE: The product is equipped with warming panels (see product
overview diagram on page 7). Warming panels are suitable for
Metal, Enamel, Glass, Ceramic, Stone & Foil cookware.
Warmer Mode Button
Press the warmer mode button in standby mode to start heating
the panels with the default temperature of 100°C and warming
reservation time of 2 hours. The Warmer mode button will
illuminate.
Temperature Control Button
Press the temperature control button to adjust the temperature
from any of the three allowable warming temperatures (80°C,
100°C or 120°C).
Timer Button
Press the timer button to adjust the warming countdown timer
from any of the three allowable settings (1h, 2h or 4h).
NOTE: The control panel includes a hot plate operation area and
food warmer operation area, which can work independently or
simultaneously.
NOTE: During warming mode, the hot plate also heats, but for
a short time. The default program automatically heats up for 2
seconds and stops for 34 seconds to reach a consistent 140°C.
The temperature of the left and right Warmer panels are different
from the hot plate. If you select from the three allowable warming
temperatures (80°C, 100°C or 120°C). The hot plate will slowly heat
up until it stabilizes and reaches 140°C. This enables you to have
another area for warming food.
12
BEFORE FIRST USE
1. Remove all packaging materials.
2. Thoroughly wash the product by hand with a clean cloth
or paper towel. Do NOT wash it directly or immerse the
product in water.
3. Check that all accessories are complete and the appliance
is not damaged.
4. Hold the left heating plate (without control box), with your
left hand and lift it up and place it on the table, as shown in
figure below.
IMPORT
ANTREMINDER:P
LEASEMAKESURE
THE
UNI
T
I
S
FULLY
UNFOLDEDBEFORE
OPERATING.D
ONOT
FOLDTHE
UNIT
WHI
LEI
TI
SI
NUSE.
IMP O RTAN T R EM IND ER : PLEASE M A KE SU RE TH E U N ITISFU LLY U N FO LDED B EFO R E
OP ERAT ING . DO N OT F O LD TH E U NIT W H ILEIT ISINU SE.
E U NIT IS FU LLY UN F OL DE D BE FO RE
IT W H ILE IT IS INU S E.
H E U
IM P O R TA N TR EM IND ER: PLEAS E M A K E SURE TH E UN ITIS FU L LY UN F O LD EDB EFO R E
OP ERAT ING . DO N OT F O LD TH E UN IT W H ILEIT ISINU SE.
IMP O RTA NT R EM IN DER : PLEASE M A KE SU R E THE U N ITISFU LLY U N FO LDE D BEF OR E
OP ERAT ING . DO N OT F O LD TH E U N IT W H ILE ITIS INU SE .
NOTE: During first use, the product may emit a slight odour.
This is normal.
OPERATING INSTRUCTIONS
1. Plug one end of the power cord securely to the control box’s
plug socket and plug the other end of the cord into a power socket.
2. The power button will flash once the power is turned on and a
beep will sound. At this stage, only the power key is in use and the
product is in standby mode.
Hot Plate Mode
1. To activate the electric ceramic hot plate in the centre of the
middle panel, press and hold the Hot Plate button for two
seconds. See diagram on page 14.
13
2. The unit starts heating in default temperature setting P1 (150°C).
The hot plate has seven temperature settings from P1 (150°C) to
P7 (500°C) and can be adjusted by pressing the Increase + or
Decrease - buttons.
3. The default time for the Hot Plate mode in P1 is 45 minutes.
This can be adjusted by pressing the timer icon and then
increasing or decreasing using the +or -buttons while the timer
button and time remaining flashes. If no adjustments are made
after the default 45 minutes, the unit will automatically go to
standby mode.
4. You can pause cooking by pressing the button. The hot
plate will pause and the button and display indicator light will
flash. To resume cooking, press the button and the light will
illuminate. At the same time, the will flash. Press the again,
the light will go out and the product will start cooking. To stop
cooking, press and hold the button for 2 seconds, and the
appliance will enter the standby state and the power button and
display will illuminate and the button light will go out.
Warmer Mode
1. The power button will flash once the power is turned on and a
beep will sound. At this stage, only the power key is in use and the
product is in standby mode.
2. In standby mode, press the Warmer Mode button to start
warming the zones with the default temperature of 100°C and
reservation time of 2 hours. The temperature control and timer
buttons will both illuminate.
3. Press the temperature control button to adjust the
temperature from any of the three allowable warming
temperatures (80°C, 100°C or 120°C).
4. Press the timer button to adjust the warming countdown
timer from any of the three allowable settings (1h, 2h or 4h).
OPERATING INSTRUCTIONS
14
5. To stop the warming function, press the Warmer Mode button
again and the appliance will enter the standby state and the power
button and display will illuminate and the Warmer Mode button
light will go out. After approximately 1 minute, the unit will go into
standby mode and the Power button will flash.
Warmer & Hot Plate Mode
NOTE: The Warmer & Hot Plate modes can work at the same time
or independently without affecting each other. When the hot plate
mode starts, the warmer panels can also operate at the same
time.
1. To activate the electric ceramic hot plate area in the centre of
the middle panel, press and hold the Hot Plate button for two
seconds. Refer to more detailed instructions on page 13.
2. To activate the Warmer panels at the same time, press the
Warmer Mode button to start warming the zones with the
default temperature of 100°C and reservation time of 2 hours. The
temperature control and timer buttons will both illuminate. Refer to
more detailed instructions on page 13.
NOTE: During Warming mode, the hot plate also heats, but for
a short time. The default program automatically heats up for 2
seconds and stops for 34 seconds to reach a consistent 140°C.
The temperature of the left and right Warmer panels are different
from the hot plate. If you select from the three allowable warming
temperatures (80°C, 100°C or 120°C). The hot plate will slowly heat
up until it stabilizes and reaches 140°C. This enables you to have
another area for warming food.
OPERATING INSTRUCTIONS
IMPORTANTREMI
NDER:P
LEASEMAKESURETHEUNITI
SFULLYUNFOLDEDBEFORE
OP
ERATI
NG.D
ONOTFOLDTHEUNITWHI
LEI
TI
SI
NUSE.
IMPORTANTREMINDER:P
LEASEMAKESURETHEUNITI
SFULLYUNFOLDEDBE
FORE
OPERA
TI
NG.
D
ONOTFOLDTHEUNITWHI
LEI
TI
SI
NUSE.
Electric Ceramic Hot Plate
Warming Zone
Warming Zone
15
TROUBLESHOOTING
Fault Reason Solution
Displays
E1
Open circuit or short circuit of
internal electrical components.
Contact Customer
Care Centre.
Displays
E3
Thermocouple fault. Contact Customer
Care Centre.
No
electricity
Fuse blown. Contact Customer
Care Centre.
Power board connecting wire
falling off/power board damaged/
control board connecting wire
falling off/control board damaged.
Contact Customer
Care Centre.
Electric
ceramic
hot plate
zone not
heating
The electric ceramic hot plate is
damaged/the connecting wire of
the electric ceramic zone falls off.
Contact Customer
Care Centre.
Displays
E2
Fan is damaged. Contact Customer
Care Centre.
Warming
board
is not
heating
The heating wire connection
interface falls off or the heating
wire is damaged.
Contact Customer
Care Centre.
16
STORAGE INSTRUCTIONS
• WARNING: Unplug the unit and allow to cool completely
before cleaning.
• Do not wash in a dishwasher.
• Do not immerse warmer in water for cleaning.
• Do not use metal objects or abrasive cleaner.
• Use a soft cloth to clean.
IMPORT
ANTREMINDER:P
LEASEMAKESURE
THE
UNI
T
I
S
FULLY
UNFOLDEDBEFORE
OPERATING.D
ONOT
FOLDTHE
UNIT
WHI
LEI
TI
SI
NUSE.
IMP O RTAN T R EM IND ER : PLEASE M A KE SU RE TH E U N ITISFU LLY U N FO LDED B EFO R E
OP ERAT ING . DO N OT F O LD TH E U NIT W H ILEIT ISINU SE.
E U NIT IS FU LLY UN F OL DE D BE FO RE
IT W H ILE IT IS INU S E.
H E U
IM P O R TA N TR EM IND ER: PLEAS E M A K E SURE TH E UN ITIS FU L LY UN F O LD EDB EFO R E
OP ERAT ING . DO N OT F O LD TH E UN IT W H ILEIT ISINU SE.
IMP O RTA NT R EM IN DER : PLEASE M A KE SU R E THE U N ITISFU LLY U N FO LDE D BEF OR E
OP ERAT ING . DO N OT F O LD TH E U N IT W H ILE ITIS INU SE .
CARE & CLEANING
IMPORT
ANTREMINDER:P
LEASEMAKESURE
THE
UNI
T
I
S
FULLY
UNFOLDEDBEFORE
OPERATING.D
ONOT
FOLDTHE
UNIT
WHI
LEI
TI
SI
NUSE.
IMPO RTA N T REM IND ER : PLEASE M A KE SU RE TH E U N ITISFU LLY U N FO LDED B EFO R E
OPER ATIN G. DO N OT F O LD TH E U NIT W H ILEIT ISINU SE.
E UN IT ISFU LLY UN FO LD ED B EF OR E
ITW HILE IT ISIN U SE .
HE U
IMP O R TA N T R EM IND ER : PLEASE M AKE SUR E THE UN ITIS FU L LY UNF O LD EDB EFO R E
OPER ATIN G. DO N OT F O LD T HE U N ITW H ILEIT ISINU SE.
IMPO R TAN T REM IN DER : PLEASE M A KE SU R E THE U N ITISFU LLY U N FO LDE D BEF OR E
OPER ATIN G . DON OT F O LD TH E U N ITW H ILE ITISIN U SE.
• Do not store the appliance in a hot and humid place.
• Store the appliance in the supplied packaging or in a clean and
dry place.
• WARNING: Ensure the appliance is cool, clean and dry before
storing.
• Storage and folding instructions are shown in below figure: Lift
the left warming panel with your left hand and unfold it.
17
WARRANTY
Please refer to the warranty card in the box for warranty information.
For any troubleshooting advice, please contact the relative Customer
Care Centre below.
Glen Dimplex Australia Pty Ltd Glen Dimplex New Zealand Ltd
8 Lakeview Drive, 38 Harris Road, East Tamaki,
Scoresby 3179, Victoria Auckland 2013
Australia New Zealand
Ph: 1300 556 816 Ph: 0800 666 2824
MAINTENANCE
If the unit fails to operate efficiently, is broken or other problems
arise, unplug and do not operate.
Ask for advice by calling your local after sales service agent or
the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824
(NZ).
TIPS FOR YOUR PRODUCT
• WARNING: Do NOT use this product when folded.
• During operation, if the panels are rotated more than 90° the
unit will shut off. When reactivating, the unit will be in stand by
mode.
• When the Hot Plate button is pressed during operation,
cooking pauses and the blinks. To resume cooking, press
the button and the light will illuminate. At the same time,
the will flash. Press the again, the light will go out and
the product will start cooking.
• Always use oven gloves when moving hot containers.
• WARNING: Do not touch hot surfaces.
18
NOTES
19
NOTES
© Glen Dimplex Australia. All rights reserved. Material contained in this publication may not be
reproduced in whole or in part, without prior permission in writing of Glen Dimplex Australia.
MRFW15WT_IM_v2
Recycling: Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection
facilities. Contact your local government for information regarding the collection systems available. If
electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the ground
water, polluting the food chain and damaging health and wellbeing.
Expanded Polystyrene Disposal: The websites listed below can assist in the responsible disposal of EPS
(Expanded Polystyrene) packaging products.
Australia: https://recyclingnearyou.com.au/polystyrene and/or http://epsa.org.au
New Zealand: https://greenbusinesshq.com/epsrecycling and/or
https://www.plastics.org.nz/environment/recycling-disposal/eps-recycling
Glen Dimplex Australia Pty Ltd
8 Lakeview Drive
Scoresby VIC 3179
Phone: 1300 556 816
Email: [email protected]
Web: www.morphyrichards.com.au
Table of contents
