Morris MDE-2013 User manual

New generation of intelligent dehumidifier.
Use and maintenance manual
Model No: MDE-2013
www.morris.gr

1
Safety Precautions....................................................................................................................................................2
Assembly Requirements..........................................................................................................................................3
Power Requirement ................................................................................................................................................3
Power plug and socket electric circuit requirement.................................................................................................3
Recommendation ground method...........................................................................................................................3
Place requirement...................................................................................................................................................3
Use of Dehumidifier ....................................................................................................................................................4
Product Conponents Introduction............................................................................................................................4
Operation and setting..............................................................................................................................................4
Start / Stop Dehumidifier .....................................................................................................................................4
Control Panel Drawing.........................................................................................................................................5
full water will autostop .........................................................................................................................................5
Mode Selection....................................................................................................................................................6
Humidity Selection...............................................................................................................................................6
Digital display screen...........................................................................................................................................6
Time Setting.........................................................................................................................................................6
Anion function......................................................................................................................................................7
water draining introduction......................................................................................................................................7
Take out and put back the water tank..................................................................................................................7
Drain pipe’s connecting .......................................................................................................................................8
Normal sound ......................................................................................................................................................8
Air Filter Net ............................................................................................................................................................9
Cleanliness and care instructions...............................................................................................................................9
Outside....................................................................................................................................................................9
Water tank...............................................................................................................................................................9
Fault Removal..........................................................................................................................................................12
Dehumidifier doesn’t work.....................................................................................................................................12
The pipe is frozen..................................................................................................................................................12
The humidifier works without humidifying function................................................................................................12
Hot air blew from Air outlet....................................................................................................................................12
Fault instructions:......................................................................................................................................................13
Specification sheet....................................................................................................................................................14

2
Safety Precautions
You and others’safety is very important
In this manual and the dehumidifier machine, we have provided many important safety
messages. Please make sure to read thorough and comply with all the safety information.
This is the safety warning sign.
This sign warns you of potential danger, which may lead to severe injury.
All the safety information will follow the safety warning signs and the letter of
“Dangerous” or “Warning”.
These letters shows
DANGER
If you do not follow the instructions immediately, it
may Cause the death or serious injury.
WARNING
If you do not follow the instructions, it may
cause the death or serious injury.
All safety messages will tell you what are the potential dangers, teaching you how to reduce the
chance of injury
, also tell that if you do not follow the instructions, what consequences will
happen
Important safety instructions
Warning: In order to reduce the happening of the fire, electric shock, injury or health problems
when using the dehumidifier, please follow the basic cautions below.
■
Before using , please make sure the power source’s
voltage is 220-240V , its frequency is 50 Hz
■Please use the three hole socket with grounding
device
■Please do not remove the ground pin , do not
use the adapter or extension cord
■In order to avoid the overheating, do not
cover the dehumidifier.
■Dehumidifierdo not close to the power socket directly
■Cannot be used in bathroom and laundry room
■Socket, power line keep far away from the moisture
place
■Do not spray the water , pesticides and combustible
liquid on the machine body
■
Before the repair service, please pull the plug.
■If moving the machine, please turn off the
power first and then pull out the plug.
■Do not drink the water collected in water tank
when the machine is working.
■This machine is limited to indoor use, do not
close to the fire when using.
■If the power cord damage , must be replaced
by the manufacturers or service center or the
person with similar qualifications to avoid the
danger
■Children cannot use this product, also do not
be allowed to ride or play.
■Do not place the heavy objects on the machine
body
Please keep this manual properly

3
Assembly Requirements
Power Requirement
WARNING
Danger of electric shock
Insert a grounding type three hole socket
Do not use the adapter
Do not use the extension cord
If do not follow the above instructions , may cause
the death , fire or electric shock.
The detailed power requirements as below chart
Please follow the power plug type for the electricity
use
Power plug and socket electric circuit requirement
■
220-240V / 50Hz
■10 ampere delayed fuse or
breaker
Recommendation ground method
This dehumidifier must be well grounded . This
machine is equipped with grounding type plug
power cord. To reduce the possibility of the electric
shock , power plug must be inserted into the
matching grounding type socket . Grounding
should comply with the local laws and regulations .
If there is no matching grounding type plug , the
customer has the responsibility to consult with the
qualified water and electricity personnel ,
assemble the grounding type plug correctly.
Customer’s obligation
■Consult with the qualified water and electricity personnel
■Make sure the power source’s installation is to meet the product demands , and in accordance with the
provisions of the local electrician.
■If do not use the dehumidifier for long time , please unplug the power cord plug
Place requirement
Attention
：
different dehumidifier items
may be different with the below picture.
■Please make sure that at least 12 inch
and 18 inch (30.5 to 45.7 cm) space
left for behind models’breathing , and
above space left for above
models’exhausting.
■It should be placed in a flat, solid
ground which can load the
dehumidifier with the full water
weight.
■When the dehumidifier is working ,
should close all the doors and
windows. For the wet air outdoors
will increase the working load of the
machine
■Do not use the dehumidifier at a place
which its room temperature is lower
than the machine’s minimum
operation temperature 5°C (41°F) ,
maximum temperature not exceed
35°C , otherwise it will be unable to
operate .
■Please open the top wind deflector
before using ; When using , do not
cover the wind deflector for
avoiding the dangers

4
Use of Dehumidifier
Product Conponents Introduction
1. Handle
2. wind deflector
3. front cover
4. back cover
5. water bank
6. back filter screen frame
7. water plug
8. wrapping post
9. plug hole
10. universal wheel
Operation and setting
Start / Stop Dehumidifier
■Before starting the dehumidifier , please confirm the
■bucket is empty , and placed ready in dehumidifier.
■Before starting the dehumidifier , please open
the wind deflector to proper position
■Each time when pull out the plug or interrupt
the power supply , when the power is return ,
the controller will back to original setting.
Attention
■Operation temperature is 5°C ~35°C
■The adjustment humidity range is from 30% RH to
80% RH

5
■When the LED screen shows “CO”, means
the function of dehumidification continuous.
■When reaching the setting temperature , the
compressor will stop working , then the fan will
stop delay for some time .
Control Panel Drawing
WARNING
Danger of electric shock
Insert the grounding type three hole socket
Do not remove the grounding pin
Do not use the adapter
Do not use the extension cord
It may cause the death , fire or electric shock if not
following these instructions and operations
1.Insert the grounding type three hole socket
2.Press the power supply and open the dehumidifier (the
power light is lit up )
3.Open the wind deflector to proper position
4.Press the”mode”, you can choose the
operation mode , sequentially the wisdom
dehumidifying , normal dehumidifying,
powerful dehumidifying , air clean (Preset is
wisdom dehumidifying)
5.Set the humidity, please see "humidity Settings"
section
6.Set the time, please see "time Settings" section
7. After use , press the power supply and turn off
the dehumidifier
Remark : this dehumidifier will memory the humidity
and wind speed setting state before the power turning
off .When starting again , it will enter into previous
setting state automatically (if pull out the power plug ,
and then starts, it will restore the initial default)
full water will autostop
If the full water indicator light lits up , the machine will
stop the operation. This means you need to check.
■If the bucket is full , please make it empty and
back.
■If the bucket do not place into the proper
location , please remove the bucket and put
back. Make sure the bucket is fully loaded into
the dehumidifier , and led do not light up , or
the machine will unable to work .
■After put back in the bucket , please restart

6
after waiting for 5 minutes , making sure that
the compressor’s using life longer
Mode Selection
1. Press the power supply and select operating
mode (the initial default is wisdom
dehumidifying)
2. Selecting the wisdom dehumidifying , normal
dehumidifying, powerful dehumidifying , air
clean sequentially
■Air clean : start the fan and supply air , make
the indoor air circulation ; Do not start the
compressor , for no dehumidifying effect .
■Normal dehumidifying : to set the bass slowly
to reach the required humidity setting .It is
suitable used on the condition that sleeping at
night , quiet environment and the indoor
humidity is not high .
Power dehumidifying : humidity can not be set .
Especially against the high humidity
environment , setting the dehumidifying no
interruption function . Suitable for clothes
drying or person who needs low humidity
space.
■Wisdom dehumidifying : adjust the fan speed
automatically , in order to reach the most
suitable body environment 55% relative
humidity. When the environment humidity is
70% or higher , the powerful dehumidifying
will operate automatically . When the
environment humidity is 55%-70% , the normal
dehumidifying will work ; When the
environment humidity is less than 55% , it
becomes the mode of air clean.(Note : can not
choose the humidity in automatic mode)
Humidity Selection
1. Press the “mode”, in the mode of “normal
dehumidifying”, you can choose the
humidity.(can not choose the humidity at the
mode of the air clean , wisdom dehumidifying
and powerful dehumidifying)
2. Press the LED screen’s up and down keys on
the left and right sides , select the humidity
setting of 30%~80% (Note : the initial use
humidity presetting is 55%)
If the indoor humidity is higher than the
setting humidity , the compressor will start.
If the indoor humidity is lower than the setting
humidity , the compressor will shut down.
After the 5 seconds , the humidity display is no
longer flashing , meaning the setting is
successful.
3. Continuous dehumidifying : at the mode of
“ Normal Mode “ , you can choose the continuous
dehumidifying function . Press the LED screen’s
up and down keys on the left and right sides ,
select the CO (continuous) , meaning that the
dehumidifier will operate continuous .
Digital display screen
The screen will display the relative humidity and
time (Depending on the setting)
1. When the dehumidifier is operating at the
required humidity mode , the screen will display
the environment humidity .
2. Select the timing , the screen will display the
running time which the dehumidifier is setting ,
1~12 hours .
Time Setting
1. Press the “timing”key , and the LED
screen’s up and down keys on the left and
right sides , select the operation time setting
0-12 hours .

7
2. After the 5 seconds , the timer indicator light
will light up continuous , no longer flashing ,
meaning the setting is successful.
Note : Each mode can choose the time setting ,
when the setting time is finished , the compressor
will shut down , the fan will stop running , entering
into the standby mode .
Anion function
1.Press the “anion”button , start the anion
function ; If no needs of the anion function , press
the “anion”button again
Attention:
This machine is B type low temperature
dehumifier , its using environment temperature is
5-35 °C . If the indoor temperature is too low , the
cooler’s surface will be frosted , then the
defrosting function will start automatically , the
power light will be flashed at this time .
If the low temperature happens , the defroster will
close the dehumidifier automatically, enen
pressing the “humidity”setting , the
dehumidifier will not start . When the defroster is
detecting the appropriate operation temperature ,
the compressor will be restarted .
Attention:
1. If the setting humidity is higher than actual
environment humidity , the dehumidifier will
not operate .
2. When the full water light is light up , please
pour out the water in the tank , and then put
back the water bank , the machine will
continue to operate.
3. When the machine is shut down , please
restart after waiting for 5 minutes , in order to
ensure the compressor’s using life longer .
4. If do not use the dehumidifier for long time ,
please pull out the power cord’s plug .
water draining introduction
WARNING
illness risk
Do not drink the collected water in bucket.
Otherwise it may lead to illness.
Take out and put back the water tank.
1. When the water tank is full of water , the
machine will stop running , the full water
indicator light will light up .
2. Before pouring out the water , please make
sure to pull out the power plug .

8
3. Taking the handle level out of the water tank
gently , holding the water tank on its both
sides .
4. After pouring out the water , return the water
tank to the machine body until positioning
5. The running indicator light is light up , and the
full water indicator light will go out .
Note : in order to avoiding the compressor
breakdown caused by intermittent start , do not
repeat the action of the water tank’s “taking
out”and “replacing”
Drain pipe’s connecting
It can continuous drainage after the installation .
1.Take out the water plug cover in back cover’s
outlet , and pull out the water plug .
2.Put the water pipe inserted into the machine
body’s continuous drain hole , make the drainage
hole inserted into the drain pipe.
3.Put the water pipe’s the other end into the floor
drain , checking whether the pipe is straight and
then connected to the drain
Notes:
■If do not use the water pipe but the water tank ,
please remove the water pipe first , then put
back the water plug and water plug cover
■Whatever you use the water pipe to do the
continuous drainage or not , the water tank
must be put back to its positioning , in this way
the dehumidifier will begin to operate .
Normal sound
When the dehumidifier operates normal , you will
hear the following sound .
Compressor sound , this sound may be louder ,
this is the normal phenomenon .
When the dehumidifier or the compressor close
and starts , and turn off the switch
automatically and operates , makes a snapping
sound .
The fan air flowing sound

9
Air Filter Net
The net is detachable and easily to clean. Clean net
can prevent the dust and other particle in the
air,which can help the dehumidifier work better.So
please check the net every two weeks if it need to be
cleaned.
1.Switch off the dehumidifier
2.Unplug the power plug.
3.Pull the net out
4. If the net is too dirty,please clean it with detergent
in warm water.Mustn’t use dish-washing machine.
Replace back the net.
Cleanliness and care instructions
Outside
Atention: Authorised technicians help clean and
maintain the internal coil.
1. Switch off the dehumidifier.
2. Unplug the plug.
3. Use brush or other dedusting components to
clean the back net.
Water tank
Clean the internal of the dehumidifier with cleaners to
avoid bacteria every several weeks.
Floating ball
The dehumidifier has floating ball and water level
instruction light.The water tank must be placed in
right position. The dehumidifier won’t work until the
light turns off.
Note: The water tank must be placed in right position.

10
Instructions on care and cleanness
Don’t place the dehumidifier on soft or Don’t stab any sticks or hard
cobbly ground to avoid causing any noise. things into the dehumidifier to keep away from any
damage or risk.
Keeping away from heaters can save Shuting down the windows when
Energy. using help dehumidifier function better.
No things around the dehumidifier or air Remove the plug if long time no using
outlet to ensure good dehumidifying capacity. or power failure to avoid electric leakage which may
cause fire

11
Use wet cloth clean the dehumidifier.No No heavy things or any water
water splashing. containers putting on the dehumidifier.
Wash the filter net once every two weeks. No basking directly to avoid the net
(No hot water above 40℃,alcohol,gas, toluene) deformation.
Pour out the water in the tank before moving Should be placed at a ventilated
dehumidifier. place to avoid burning out.

12
Fault Removal
Before calling the service phone number( ),we suggest you try to solve the problems according the advise
below which will save you a lot of time.
Dehumidifier doesn’t work.
■Check the dehumidifier if turned on. Start the
dehumidifier.
WARNING
Risk from electric shock
Use a 3 pins ground plug.
Don’t remove the ground pin.
No using adapter.
No lengthening the power cable.
If you don’t obey the warning above-
mentioned, may result in death, fire and electric
shock.
■Check the plug if it is in the ground socket.Plug it
in.
■Check the safety switch.Reset it.If the
dehumidifier still doesn’t ,call wireman for help.
■Check the setting of water tank.Replace the water
tank to right position.
■Check it is full of water tank.Pour away the water.
■Ensure the ball place at right place.Load the
water tank back to the humidifier.
The pipe is frozen.
■All the models have defrosting function.The fan
keeps working after the compressor stop
working.This can solve the problem of frozen
pipe.When the defrosting device induct the room
temperature of the dehumidifier,the dehumidifier
will restart dehumidifying.
The humidifier works without humidifying function.
■All the models have defrosting function.The
compressor will stop working and keep the fan
working to help defrost.When the temperature
rise to room level,the compressor go on working
and the dehumidifier keep dehumidifying.
■Check the setting if it is on constant working
setting.If it is,the humidity is very low and the
humidifier can’t dehumidify any more.
■Check the air filter if it is blocked.Clean up the air
filter.
Hot air blew from Air outlet
■The dehumidifier will blow warmer air when
functions properly.
■The glint of the power light:1.The glint is one
time per second when is is defrosting.2.The
light shines three seconds then extinguishes
one second or shines one second then
extinguishes means there’s something wrong
with the humidify sensor.
■The dehumidifier works when switched
on.Check the dehumidifier is defrosting or
not.It is off when defrosting.After
defrosting,the humidifier will restart
automotively.

13
Fault instructions:
1.The humidity can’t be controlled if the humidity sensor is broken.
It means whatever the humidity user sets,the dehumidifier will not work except the puring,CO and cloth
drying function.
2.The power instruction light shine one second then extinguishes three seconds when the humidity sensor is
broken.The power instruction light shine three seconds then extinguishes one second when the temperature
sensor is broken.
3.If both are broken,the temperature is prior.
Fault
Please check the suggestion as below
Dehumidifier doesn’t work after switched
on.
1. Whether the water tank is placed at right
position
2. Check the plug if it is plugged in.
3. Whether the home fuse is blew out.
4. Whether there is a power failure
The dehumidifying capacity is too weak.
1. Check if the filter net is blocked
2. The humidifying capacity will be weaker if
the temperature and humidity is too low.
3.
Check whether the air inlet is blocked.
The humidity can reach the expected
level after long-time working.
1. Whether the door and window open too
big.
2. Whether there is anything which produces
vapor.
3. Whether the space is too big.
When it is too noisy 1. Whether the ground is smooth.
2. Check if the dehumidifier is placed unwell
which will cause noise.
The power instruction light shines. 1. Check if the humidity sensor and
temperature sensor is broken or loose

14
Specification sheet
Model number MDE-2013
Cooling gas R134a
Voltage(50Hz) 220-240V
Dehumidifying capacity (L/d)
(30°C RH80%) 20
Power (W) 300
Noise(low-high) (dBA) 42 ~ 48
Wind capacity (低~高風速) (cfm) 140~160
Rated current (A) 1.41
Suitable environment temperature
(°C) 5 ~ 35
The degree of product B
Wind speed adjustment Automatic,low,high,air
loop
Range of humidity (%RH) 30 ~ 80
Timer(Hour) 1~24
Air filter PP dustproof
filter.Washable
Instruction light of full water tank Yes
PSS platinum degree safety
protection system
Yes
Capacity of water tank(L) 4
The water fulling litres when
switched off automatically(L)
3.5
Drainage method External Drain Connect
Wheels for moving Yes
Product weight(kg) 12KG
Product
dimension:height,width,length(mm)
L330*W274*H570
Carton
dimension:height,width,length(mm)
L378*W310*H650
color White / silve
Note: Function, specification and color based on real product.

15
www.amiridis-savvidis.gr
declare that the dehumidifier
EN 55014-1/A2:2011
EN 55014-2/A2:2008
EN 61000-3-2/A2:2009
EN 61000-3-3:2013
EN 60335-2-40/A13:2012
EN 60335-1:2012
EN 62233: 2008
Rohs Directive: 2011/65/EU