Motive Cable 3002 User manual

Cable 3002
Also applicable to Cable 3000 and Cable 3003
Vehicle Gateway installation guide
for vehicles with a 9-Pin port

2
12
3
4
5
Step 1
Step 2
Step 3
Ensure the vehicle is safe to install the Motive
Vehicle Gateway:
• The parking brake is engaged.
• The engine is of.
• The main power switch (if available) is turned of.
Locate the 9-Pin port.
This port is normally located on the driver’s side
underneath the dash panel and is black or green.
For vehicles that require a Y-cable, one is available
upon request. Motive recommends only using one
Y-cable per vehicle when necessary.

855-434-3564 | [e-mail]
Step 3 (continued)
Atach the 9-Pin Y-cable to the vehicle’s 9-Pin port
and replace the vehicle’s exposed 9-Pin port with
the matching end of the 9-Pin Y-cable.
Y-cables come with two unique harness mounts.
A square mount with screws and a threaded
mount with a nut.
Step 4 Connect and secure the 9-Pin end of the Motive
cable to the vehicle’s 9-Pin port.

4
Use the zip ties provided to secure the cables.
Atach the 15-pin connector to the Vehicle Gateway.
Step 4 (continued)
Secure the 15-pin connector onto the Vehicle
Gateway using the thumbscrews.
Use the provided alcohol swabs to clean the
mounting area.
Remove the backing from the adhesive strip on
the back of the Vehicle Gateway and atach it to
the mounting area.

855-434-3564 | [e-mail]
Step 4 (continued) Motive recommends installing the Vehicle Gateway
near the windshield, as well as away from any vents,
electrical components and at least 12 inches away
from any metal components.
The Vehicle Gateway may be installed in alternative
locations, such as the wheel well, provided it meets
the aforementioned requirements. Please ensure all
cabling and devices are secured to avoid interfering
with safe operation of the vehicle.
K

6
Step 4 Once plugged in, the indicator lights will
flash momentarily before turning solid red.
Ater approximately one minute, the let-side
indicator light will turn green indicating a
successful GPS connection.
Additionally, GPS/GNSS performance may degrade if the
vehicle gateway does not have clear line of sight to the sky.

855-434-3564 | [e-mail]
Step 5 Once the driver connects to the Vehicle
Gateway using the Motive Electronic Logbook
App available on iOS and Android, the right-
side indicator light will turn green indicating a
successful Bluetooth connection.
Please refer to the Motive Driver App Guide for
more details on the Motive mobile plaform. For any
assistance, please contact Motive support at 855-
434-3564 or email [e-mail].

Potential
Unlocked
gomotive.com