Motorola MBP867 User manual

User’s Guide
Digital Video Baby Monitor
Models: MBP867, MBP867-2, MBP867-3, MBP867-4
The features described in this User’s Guide are subject to modifications without prior notice.

Welcome...
to your new Motorola Video Baby Monitor!
Thank you for purchasing the Motorola Video Baby Monitor. Now you can
see and hear your baby sleeping in another room or you can monitor your
older children in their playroom.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to provide a
copy of your dated sales receipt to confirm warranty status. Registration is
not required for warranty coverage.
For product related questions, please call:
This User's Guide provides you with all the information you need to get the
most from your product.
Before initial use of the Baby Monitor we recommend you fully charge the
battery in the Parent Unit, so that it continues to work if you disconnect it
from the Power Supply to carry it to another location. Please read the
Safety Instructions on page 6 before you install the Units.
Got Everything?
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 1 x Power adapter for the Parent Unit
• 1 x Power adapter for the Baby Unit
In multi-camera packs, you will find additional Baby Units with power
adapters.
US and Canada 1-888-331-3383
Email: [e-mail]

Overview of the Parent Unit
1. Display (LCD screen)
2. Vol + Key
Press to adjust volume up.
3. Vol - Key
Press to adjust volume down.
4. Menu Key M
Press to open the menu options.
5. OK key, press O
Press and hold the OK key for 4
seconds, a snap shot of the
display will be saved in the Micro
SD card inside the DCIM folder.
6. Video ON/OFF Key V
7. Talk Key T
Press and hold to speak to your
baby.
8. Microphone
9. Power Key P
Press and hold to turn the Unit
ON/OFF.
10. Stand
11. Speaker
12. USB power adapter socket
13. Reset Key
Use a pin to reset the device if
needed (ie: screen freezes or
unstable).
14. Micro SD Card Slot
SD
10
11
4
8
5
6
7
1
9
13
2
3
12
14
Parent unit menu icons
Signal Level (4 Levels)
Night Vision Mode (Screen changes to Black/White)
Talk Mode
Battery Level Control (4 Levels)
Volume Level Control (8 Levels)
Zoom Level Control
Brightness Level Control (8 Levels)
Lullaby Control (5 Song Selections)
Alarm Setting

Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Units together, you must be able
to establish a radio link between them, and the range will be affected by
environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic
doors or reinforced concrete between the Baby and Parent Unit may block
the radio signal.
• The signal strength may also be reduced by other solid structures, like walls,
or by radio or electrical equipment, such as TVs, computers, cordless or
mobile phones, fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi®routers),
Bluetooth®systems, or microwave ovens, may cause interference with this
product, so keep the baby monitor away at least 5ft (1.5m) from these types
of products, or turn them off if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or the Baby Unit to different
positions in the rooms.
1. Light Sensor (Night Vision Mode) 6. Speaker
2. Camera Lens 7. ON/OFF Switch
3. Infrared LEDs 8. Power Adapter Socket
4. Power LED 9. Temperature Sensor
5. Microphone 10. Pair Key
Parent unit menu icons (cont’d)
Overview of Your Baby Unit
Temperature Reading (HH ºC / ºF or LL ºC / ºF)
Icon & readings turn RED >29ºC / 84ºF, and reading display
HH ºC / ºF >36ºC / 97 ºF
Icon & readings turn RED <14ºC / 57ºF, and reading display
LL ºC / ºF <1ºC / 34 ºF
Cam Control (scan, view, add, delete)
Screen viewing mode control (Single Screen, 2-split Screen)
Set Video On Timer (5 min, 30 min, 60 min)
Playback snap shots from memory card
7
8
1
2
5
10
9
6
3 4

Table of Contents 5
ENGLISH
Table of Contents
1. Safety Instructions..................................................................................... 6
2. Getting Started.......................................................................................... 8
2.1 Baby Unit Power Supply.............................................................................. 8
2.2 Parent Unit Power Supply ...........................................................................8
2.3 Registration (Pairing)...................................................................................9
3. Using the Baby Monitor........................................................................... 10
3.1 Set Up.........................................................................................................10
3.2 Night Vision Mode.....................................................................................10
3.3 Talk Mode .................................................................................................. 10
3.4 Video ON/OFF..........................................................................................10
3.5 Temperature Display (HH °C / °F or LL °C / °F) ......................................10
4. Parent Unit Menu Options....................................................................... 11
4.1 Volume.......................................................................................................11
4.2 Brightness ..................................................................................................11
4.3 Lullaby........................................................................................................11
4.4 Zoom..........................................................................................................11
4.5 Alarm..........................................................................................................12
4.6 Camera Control ........................................................................................12
4.6.1 Add (pair) a Camera .................................................................12
4.6.2 View a Camera ..........................................................................12
4.6.3 View Multi-Cameras on the screen ..........................................13
4.6.4 Delete a Camera ....................................................................... 13
4.6.5 Scan Camera .............................................................................13
4.7 Temperature..............................................................................................14
4.8 Power Saving Mode ..................................................................................14
4.9 Snap shots..................................................................................................14
5. Disposal of The Device (environment) ................................................... 15
6. Cleaning .................................................................................................. 16
7. Help.......................................................................................................... 17
8. General Information ................................................................................ 19

6Safety Instructions
1. Safety Instructions
WARNING:
STRANGULATION HAZARD: Children
have STRANGLED in cords. Keep this
cord out of the reach of children (more
than 3ft (1m) away) from the crib. Do not
use with an extension cord. Only use the
AC Adapters provided.

Safety Instructions 7
ENGLISH
WARNING
This Digital Video Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this user's guide for future reference.
• Do not place the Baby Unit or cords in the crib or within reach of the baby
(Unit and cords should be more than 3 feet away)
• Do not cover the Baby Monitor with ie: towels or blankets.
• Never use extension cords with the power adapters. Only use the chargers
and power adapters that were provided.
• Test this Monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Baby Monitor near water.
• Do not install the Baby Monitor near a heat source.
• Do not touch the plug contacts with sharp or metal objects.
CAMERA SET UP & USE:
●Determine a location for the Baby Unit that will provide the best view
of your baby in his/her crib.
●Place the BABY UNIT on a flat surface, such as a dresser, bureau, or
mount the Unit to a wall (remove or shelf) securely using the keyhole
slots under the stand.
●NEVER place the Baby Unit or cords within the crib.
●Do not place the Baby Unit within reach of the baby (the unit and cords
should be more than 3 feet away).

8Getting Started
2. Getting Started
2.1 Baby Unit Power Supply
1. Connect the USB plug of the power adapter to the Baby Unit (camera) and
the other end to the electrical outlet.
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in blue.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit OFF.
2.2 Parent Unit Power Supply
IMPORTANT
Charging the Parent Unit fully before initial use is recommended.
1. Connect the USB plug of the power adapter to the Parent Unit and the
other end to the electrical outlet.
2. Press and hold the PPOWER ON/OFF button for 2 seconds to turn the
Parent Unit ON.
3. Once the Baby and Parent Units are switched ON, the display on the Parent
Unit will show the video captured by the Baby Unit.

Getting Started 9
ENGLISH
4. If there is no connection or you are out of range, the video display will go
Off and the Unit will beep every 5 seconds. Move the Parent Unit closer to
the Baby Unit until the link is re-established.
5. Press and hold the PPOWER ON/OFF button, until the progress bar
finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon turns RED to indicate that the battery is low, and will beep
every 16 seconds. Thus indicating the battery will need to be charged and will
take approximatively 12 hours.
When Charging
1. When powering OFF, when the adapter is plugged in, the adapter logo will
display on screen followed by a flashing battery logo for 45 seconds.
2. When powering ON, when adapter is plugged in, the battery icon on
screen's top right corner will show that the battery is charging.
2.3 Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
1. Press the M button of the Parent Unit and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the
del/add/view/scan menu will pop up.
3. Press the +UP button or -DOWN button to select
add , then press the OK
button to confirm.
4.
cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the +UP button or -DOWN
button to select the desired Camera and then press the OK button to start
searching for a Camera Unit.
5. Press the OK button to confirm.
6. Press and hold the PAIR button on side of the Baby Unit until the Parent Unit
finds the Camera, beeps and then the video from the Camera will appear.
NOTE
If a particular Baby Unit was registered previously, registering the current Baby
Unit will overwrite the old registration.

10 Using the Baby Monitor
3. Using the Baby Monitor
3.1 Set Up
• Place the baby unit in a convenient location (ie: on a table) and point the
camera lens towards the area you wish to monitor.
• Adjust the Baby Unit's head angle by rotating the Camera up, down, left or
right until you are satisfied with the image on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the Units to different locations or ensure they
are not close to other electrical equipment.
3.2 Night Vision Mode
The Baby Unit has 7 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in light sensor on the top of the Unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The icon will be displayed at the
top of the screen.
3.3 Talk Mode
Press and hold the T TALK button on the Parent Unit to talk to your baby through
the Baby Unit’s loudspeaker. The T icon will be displayed at the top of the LCD
screen.
3.4 Video ON/OFF
Press the VVIDEO ON/OFF key to turn the LCD display ON/OFF but still
leaving the Audio Monitor ON.
3.5 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.

Parent Unit Menu Options 11
ENGLISH
4. Parent Unit Menu Options
4.1 Volume
1. Press the VOL UP button or VOL DOWN button to select the
desired volume level, the volume will increase / decrease respectively.
(The default volume level setting is 3.)
TIP
Another method to change volume level is by pressing the +/ -on the
front panel.
4.2 Brightness
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >button until is highlighted.
3. Press the +UP button or -DOWN button to select the brightness level
settings. (The default brightness setting is level 4.)
TIP
Another method to change brightness level is by pressing the </ >on
the panel.
4.3 Lullaby
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >button until is highlighted.
3. Press the +UP button or -DOWN button to select the desired song from
the 5 lullabies available. (The default setting is lullaby OFF)
4.4 Zoom
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >button until is highlighted.
3. Press the +UP button or -DOWN button to select the icon to turn
on zoom function and the icon to turn off zoom function.
4.5 Alarm

12 Parent Unit Menu Options
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted.
3. Press the +UP button or - DOWN button to select the alarm time. (The
default setting is Alarm OFF.)
4.6 Camera Control
4.6.1 Add (pair) a Camera
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the
del/add/view/scan menu will pop up.
3. Press the +UP button or -DOWN button to select
add , and press the OK
button to confirm.
4.
cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the +UP button or -DOWN
button to select the desired Camera, and press the OK button to start
searching for a Camera Unit.
5. Press and hold the PAIR button on side of the Baby Unit until the Parent Unit
finds the Camera, beeps and the picture from the Camera appears.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a Camera
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted and
the
del/add/view/scan menu pops up.
3. Press the +UP button or -DOWN button to select
view , and press the OK
button to confirm.
4.
cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the +UP button or -DOWN
button to select desired CAM, and press the OK button to view the picture
from that Camera.
TIP
Quick Method to view the Cameras instead of entering into the menu bar.
Press OK repeatedly to select
cam 1 , cam 2 , cam 3 , cam 4 , scan .

Parent Unit Menu Options 13
ENGLISH
4.6.3 View Multi-Cameras on the screen
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until icon is highlighted.
3. Press the +UP button or -DOWN button to select 2-split screen ON/OFF.
4.6.4 Delete a Camera
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the
del/add/view/scan menu will pop up.
3. Press the +UP button or -DOWN button to select
del , and press the OK
button to confirm.
4.
cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the +UP button or -DOWN
button to select the desired Camera, and then press the OK button to
delete that registration.
Note:
You are not allowed to delete a Camera if it is the only one registered.
4.6.5 Scan Camera
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the
del/add/view/scan menu will pop up.
3. Press the +UP button or -DOWN button to select
scan , and press the OK
button to confirm.
4. The screen will then display images from different registered cameras in a
loop of
cam 1 / cam 2 / cam 3 / cam 4 , changing about every 12 seconds.
TIP
Quick Method to view Cameras instead of entering into the menu bar.
Press OK repeatedly to select
cam 1 , cam 2 , cam 3 , cam 4 , scan .

14 Parent Unit Menu Options
4.7 Temperature
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted.
3. Press the +UP button or -DOWN button to select °C or °F.
4.8 Power Saving Mode
1. Press the Mbutton and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until Vis highlighted.
3. Press the +UP button or -DOWN button to select auto video OFF after
5, 30 or 60 minutes.
4.9 Taking, viewing and deleting Snap shots
1. Press and hold the OK key for 4 seconds during Video stream mode to save
Snap shots on the memory card.
2. To view the Snap shots, press the Mbutton and the menu bar will pop up.
3. Press the <LEFT button or >RIGHT button until is highlighted.
4. Press the OK button to playback Snap shots.
5. Press the <LEFT button or >RIGHT button to view the next or previous
photo.
6. To delete the Snap shots, press and hold OK key for 4 seconds and press it
again to confirm. Pressing other keys will abort deletion of Snap shots.

Disposal of The Device (environment) 15
ENGLISH
5. Disposal of The Device (environment)
At the end of the product lifecycle, you should not dispose of
this product with normal household waste. Take this product to
a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user's guide and/or
box indicates this.
Some of the product materials can be reused if you take them to
a recycling point. By reusing some parts or raw materials from used products
you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the
collection points in your area.

16 Cleaning
6. Cleaning
Clean the Baby Monitor with a slightly damp cloth or an anti-static cloth.
Never use cleaning agents or abrasive solvents.
Cleaning and Care
• Do not clean any part of this product with thinners or other solvents or
chemicals –- this may cause permanent damage to the product which is not
covered by the warranty.
• Keep your Baby Monitor away from hot, humid, strong sunlight and do not let
the Units get wet.
• Every effort has been made to ensure high standards of reliability for your
Baby Monitor. However, if something does go wrong, please do not try to
repair it yourself –- contact Customer Service for assistance.

Help 17
ENGLISH
7. Help
Display
No Display
• Try recharging the Parent Unit.
• Reset the Units. Unplug both the units' electrical power, then plug them
back in.
• Is the Unit ON?
Press and hold the POWER ON/OFF button Pon the parent unit to turn it
ON.
• Is the correct Camera selected?
Change the Camera number, if necessary.
• Is the Video Display turned ON?
Press the VIDEO ON/OFF button Vto turn On.
• When operating using the batteries only, the display will go blank after
5, 30 or 60 minutes to save power (depending on video on setting). Be
advised the unit is still active and will give you audio alerts. You can reactivate
the screen by pressing any button.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging the Parent Unit.
• If the Baby Unit is too far away it may be going out of range, move the Baby
Unit closer to the Parent Unit.
• Reset the Units by disconnecting them from the electrical power. Wait about
15 seconds before reconnecting. Allow up to one minute for the Baby Unit
and the Parent Unit to synchronize.
• See 2.3 Registration (Pairing), if there is a need to re-register the Unit.

18 Help
Interference
Noise interference on your parent unit
• Your Baby and Parent Units may be too close. Move them farther apart.
• Make sure there is at least 3 to 6 feet between the Units to avoid audio
feedback.
• lf the Baby Unit is too far away it may be out of range, move the Units closer
together.
• Make sure the Units are not near other electrical equipment, such as a
television, computer or cordless/mobile telephone.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi®routers),
Bluetooth®systems, or microwave ovens, may cause interference with this
product, so keep the Baby Monitor away at least 5ft (1.5m) from these types
of products, or turn them OFF if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different
positions in the rooms.

General Information 19
ENGLISH
8. General Information
lf your product is not working properly....
1. Read this User's Guide or the Quick Start Guide.
2. Contact Customer Service:
Consumer Products and Accessories Limited Warranty
("Warranty")
Thank you for purchasing this Motorola branded product manufactured under
license by Binatone Electronics International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this
Motorola branded product ("Product") or certified accessory ("Accessory") sold
for use with this product that it manufactured to be free from defects in materials
and workmanship under normal consumer usage for the period outlined below.
This Warranty is your exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not
transferable.
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or Accessories
that does not conform to this Warranty. We may use functionally equivalent
reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
US and Canada 1-888-331-3383
Email: [e-mail]

20 General Information
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.