Motorola COMFORT10 User manual

User’s Guide
Digital Audio Baby Monitor
Models: COMFORT10, COMFORT10-2
The features described in this User’s Guide are subject to modifications without prior notice.

Welcome...
to your new Motorola Digital Audio Baby Monitor!
Thank you for purchasing the Digital Audio Baby Monitor. Now you hear your
baby sleeping in another room.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a copy
of your dated sales receipt to confirm warranty status. Registration is not
required for warranty coverage.
For product-related questions, please call:
This User's Guide provides you with all the information you need to get the
most from your product.
Before you use the digital audio baby monitor, we recommend that you
insert and fully charge the battery in the parent unit, so that it continues to
work if you disconnect it from the electrical outlet to carry it to another
location. Please read the Safety Instructions on page 6 before you install
the units.
Got everything?
• 1 x Parent unit with desktop stand
• 1 x Baby unit
• 1 x Rechargeable Ni-MH battery pack for the Parent unit
• 1 x Battery door for Parent unit
• 1 x Power adapter for Parent unit
• 1 x Power adapter for Baby unit
In packs with dual parent units, you will find an additional parent unit with
power adapter, battery door and rechargeable NiMH battery pack.
US and Canada 1-888-331-3383
Email: [email protected]

Overview of the Parent Unit
1. Sound level indicator
It shows the sound level detected by the
baby unit and the speaker volume set on
the parent unit.
Sound level detected by the baby unit:
If no LED lights up, no sound is detected.
If more LEDs light up, the sound level is
high.
Speaker volume on the parent unit:
If more LEDs light up when adjusting
speaker volume, the speaker volume is
high.
2. Power/Link indicator
On steadily when the parent unit is
powered on and linked to the baby unit.
Off when the parent unit is powered off.
Flashes when it is out of range of the
baby unit.
3. UP / VOLUME +
Press to increase speaker volume.
4. DOWN / VOLUME -
Press to decrease speaker volume.
5. Power ON/OFF button
Press and hold to power on or off.
6. Charging indicator
On steadily when the parent unit battery
is being charged.
Flashes when the parent unit battery is
low and needs charging.
Off when the parent unit battery is fully
charged, or when the battery is not
installed.
7. Power jack
8. Speaker
9. Battery compartment cover
10. Desktop stand
2
3
4
1
5
6
7
8
9
10

Overview of the Baby Unit
1
2
3
Important guidelines for installing your digital baby monitor
• To use your baby unit and parent unit together, you must be able to establish
a radio link between them, and the range will be affected by environmental
conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic
door or reinforced concrete, between the baby unit and parent unit may
block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls,
or by radio or electrical equipment, such as TVs, computers, cordless or
mobile phones, fluorescent lights or dimmer switches.
• If the signal is poor, try moving the parent unit and/or the baby unit to
different positions in the rooms.
1. Power/Link indicator
On steadily when the baby unit is
powered on and linked to the parent
unit.
Off when the baby unit is powered
off.
Flashes when it is out of range of the
parent unit.
2. Power ON/OFF button
3. Microphone

5
ENGENGLISHLIS
Table of contents
1. Safety Instructions..................................................................................... 6
2. Getting Started.......................................................................................... 9
2.1 Baby unit power supply...............................................................................9
2.2 Parent unit battery installation and power supply ....................................10
2.3 Desktop stand on parent unit....................................................................11
3. Using Your Digital Audio Baby Monitor.................................................. 12
3.1 Power on or off the baby unit....................................................................12
3.2 Power on or off the parent unit .................................................................12
3.3 Adjust speaker volume of the parent unit.................................................12
4. Disposal of the Device (Environment).................................................... 13
5. Cleaning .................................................................................................. 14
6. Troubleshooting ...................................................................................... 15
7. General Information ................................................................................ 17
8. Technical Specifications ......................................................................... 22

6Safety Instructions
1. Safety Instructions
WARNING:
Strangulation Hazard. Children
have STRANGLED in cords.
Keep this cord out of the reach
of children (more than 3ft
(0.9m) away).
Do not remove this tag.

Safety Instructions 7
ENGLISH
WARNING
This Digital Audio Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Digital Audio Baby Monitor is not a substitute for responsible adult
supervision.
• Keep this user's guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the Digital Audio Baby Monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Digital Audio Baby Monitor in damp areas or close to water.
• Do not install the Digital Audio Baby Monitor in extreme cold or heat, direct
sunlight, or close to a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adapters to easily accessible electrical outlets.
BABY MONITOR SET UP & USE:
• Choose a location for the digital audio baby monitor that will provide
the best audio reception of your baby in his/her crib.
• Place the Baby Unit on a flat surface, such as a dresser, bureau or
shelf, or mount the Unit on a wall securely using the keyhole slots
under the stand.
• NEVER place the Baby Unit or cords within the crib.

8Safety Instructions
CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Use only rechargeable battery pack with rating: 2.4V 400mAh

Getting Started 9
ENGLISH
2. Getting Started
2.1 Baby unit power supply
1. Insert the DC plug of the power adapter with the bigger DC plug into the
DC jack on the back of the baby unit.
2. Connect the other end of the power adapter to a suitable electrical outlet.
NOTE
Only use the provided power adapter.
DC JACK
DC PLUG

10 Getting Started
2.2 Parent unit battery installation and power supply
A rechargeable battery pack is supplied and should be fitted, so that the parent
unit can be carried to another location without losing the link with the baby
unit(s). Charge the parent unit before using it for the first time or when the
parent unit indicates that battery is low. We recommend that the unit be
charged for 15 hours prior to first use.
1. Slide off the battery compartment cover.
2. Insert the plug of the rechargeable battery pack into the jack inside the
battery compartment.
3. Fit the battery pack into the compartment, with the label THIS SIDE UP
facing up.
4. Slide the battery compartment cover back until it clicks into place.
5. Insert the DC plug of the power adapter with the smaller DC plug into the
DC jack on the side of the parent unit.
6. Connect the other end of the power adapter to a suitable electrical outlet.
7. The charging indicator comes on.
NOTE
Only use the provided power adapter and battery pack.
We recommend that you install and fully charge the battery in the parent unit,
so that it continues to work if you disconnect it from the electrical outlet to carry
it to another location.
DC PLUG
DC JACK
THIS SIDE UP