Motorola MBP31 Triple User manual

USER’S GUIDE
MBP31, MBP31 Twin,
MBP31 Triple, MBP31 Quad
BABY MONITOR
USER’S GUIDE
The features described in this user’s guide are subject to
modifications without prior notice.

This User’s Guide provides you with all the information you
need to get the most from your product.
Before you can use the baby monitor, we recommend you
insert and fully charge the battery in the parent unit, so that it
continues to work if you disconnect it from the mains power to
carry it to another location. Please read the Safety Instructions
on page 6 before you install the units.
Got everything?
• Parent unit
• Camera unit(s)
• Rechargeable Ni-MH battery pack
• Power adapter for the Parent unit
• Power adapter(s) for the Camera unit
In multi-camera packs, you will find one or more additional
camera units with power adapter units.
Welcome...
to your new Motorola Baby Monitor!
Thank you for purchasing the MBP31, MBP31 Twin, MBP31
Triple, MBP31 Quad. Now you can see and hear your baby
sleeping in the other room or you can monitor your older
children in their playroom.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to
provide a copy of your dated sales receipt to confirm warranty
status. Registration is not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
On the Web: www.motorola.com

1. Display
2. Menu key ( )
3. Left / Vol - key
4. Microphone
5. Down / Video On-Off key
6. Right / Vol + key
7. Sound level LED indicator
8. Up/Talk key
9. Power/Channel*/Enter key
10. Power adapter connector
11. Belt clip
12. Speaker
13. Battery cover screw
14. Battery cover
Overview of your Parent unit
Parent unit menu icons
Adjust brightness level of the LCD
Turn the night vision on or off
Pair Parent unit to a Camera
Un-register paired Camera
Enter camera scan mode
Select lullabies
10
1
2
9
3
45
8
7
6
*This function is only available for multi-pack version with more than one camera.
14
12
11
13

Overview of your Camera unit
1. Power LED
2. Infrared LEDs
3. Light sensor
4. Microphone
5. Camera lens
6. On/Off switch
7. Speaker
6
7
Important guidelines for installing your Baby Monitor
• To use your video monitor camera and parent unit together, you must
be able to establish a radio link between them, and the range will be
affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet,
metallic doors or reinforced concrete, between the camera and parent
unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like
walls, or by radio or electrical equipment, such as TV's, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
• Use of other 2.4GHz products, such as wireless networks, Bluetooth®
systems or microwave ovens may cause interference with this
product, so keep the baby monitor away from these types of products,
or turn them off if they appear to be causing interference.
• If the signal is poor, try moving the parent and/or the Camera unit to
different positions in the rooms.
2
15
3
4

Table of contents 5
ENGLISH
Table of contents
1. Safety Instructions ..................................................................... 6
2. Getting started ............................................................................ 8
2.1 Camera unit power supply.......................................................... 8
2.2 Parent unit battery installation .................................................... 9
2.3 Parent unit power supply..........................................................10
2.4 Registration ..............................................................................11
2.5 De-registration..........................................................................12
3. Using the Camera Unit .............................................................13
3.1 Setting up .................................................................................13
3.2 Selecting a camera channel or
Enable Multi-video display (for multi-pack only).......................14
3.3 Pairing camera channels..........................................................14
3.4 Night vision............................................................................... 14
3.5 Talk function ............................................................................. 14
3.6 Adjusting the volume of the parent unit ....................................15
3.7 Video On/Off Function..............................................................15
3.8 Camera Scan Mode .................................................................15
3.9 Play lullaby ...............................................................................15
4. MBP31, MBP31 Twin, MBP31 Triple,
MBP31 Quad Parent Unit Menu Options ................................ 16
4.1 Brightness ................................................................................16
4.2 Night Vision ..............................................................................16
5. Disposal of the device (environment)..................................... 17
6. Cleaning..................................................................................... 17
7. Help ............................................................................................ 18
8. General Information.................................................................. 19
9. Wall mounting instructions ..................................................... 29

6 Safety Instructions
1. Safety Instructions
WARNING
This baby monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User's
Guide, safe to use. Therefore, always read the instructions in this
User's Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children
when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult
supervision.
• Keep this user's guide for future reference.
WARNING:
STRANGULATION HAZARD - Keep the adapter cord out of
baby's reach.
NEVER place camera or cords within the cot / crib.
Secure the cord some distance away from baby's reach.
Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
CAMERA SET UP & USE:
●Determine a location for the CAMERA that will provide the best
view of your baby in his cot / crib.
●Place the CAMERA on a flat surface, such as a dresser, bureau,
or shelf.
●NEVER place camera or cords within cot / crib.
●Secure the cord to the wall to keep cord away from the baby's
reach.

Safety Instructions 7
ENGLISH
• Do not place the camera unit or cables in the cot / crib or within
reach of the baby (the unit should be at least 3 feet away).
• Keep the cords out of reach of children.
• Do not cover the baby monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the
power adapters provided.
• Test this monitor and all its functions so that you are familiar with it
prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use
other chargers or power adapters as this may damage the device
and battery pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

8 Getting started
2. Getting started
2.1 Camera unit power supply
1. Connect the small plug of the power adapter to the Camera unit
and the other end to the mains socket (110V/60Hz).
NOTE
Only use the enclosed power adapter.
2. Switch the unit to ON and a green light will display.
3. Slide the switch to OFF to turn the Camera unit off.

Getting started 9
ENGLISH
2.2 Parent unit battery installation
1. Turn the belt clip so that it is in the hanging position.
2. Loosen the screw in a counterclockwise direction using a small
screwdriver. Remove the battery cover.
3. Insert the wire tab of the rechargeable battery pack into the
contact slot as shown above and fit the battery pack into the
compartment.
4. Close the battery compartment and tighten the screw in a
clockwise direction.
5. Press Fto turn ON the parent unit. In a few seconds the LCD
screen will illuminate and the unit will be ready.
6. Press and hold Fto turn OFF the parent unit.
The battery icon indicates that the battery pack is low and needs
to be recharged. The battery pack takes about 16 hours to charge fully.
NOTE
When the main power is connected, the charge icon is displayed
and the battery icon also displays while the battery is charging.
Black
Red
screw

10 Getting started
2.3 Parent unit power supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use
is recommended. This will allow the unit to operate on battery in the event
of a power failure.
1. Connect the small plug of the power adapter to the parent unit and
the other end to the mains socket (110V/60Hz)
NOTE
Only use the enclosed power adapter.
2. The LCD screen illuminates and starts up automatically after a few
seconds.
3. Press and hold Fto turn OFF the parent unit.
NOTE
Once the camera and parent units are switched on, the display on the
parent unit will show the video captured by the Camera unit.
If there is no connection or you are out of range, the video display will
go off, the icon on the LCD display will flash and the parent unit
will beep continuously. Move the parent unit closer to the Camera unit
until the link is re-established.