Motorola ELITE SLIVER User manual

MOTOROLA ELITE SLIVER
EN

Check it out 1
Check it out
here’s what you can do
Get clear calls and rich sound with your
MOTOROLA ELITE SLIVER the Bluetooth®
headset that is so small, it's barely noticeable.
But it's packed so full of features, like wideband
audio and noise cancellation, it's impossible to
ignore.
Go ahead, check it out:
At a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Charge it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connect & go. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Want more?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Safety, Regulatory & Legal . . . . . . . . . . . . . . . . . . . . 18
Caution: Please read the important safety,
regulatory and legal information at the back of
this guide.

2At a glance
At a glance
the important bits, quick and easy
Turn On & Off
Status Light
Phone
Tablet
Computer
Connections
Calls
Music
Smart Button
Wear
Call Button
Ear Gel
Charge & Store
Turn earpiece left or right to turn on.
Return earpiece back to closed position
to turn off.
closed
(storage)
position

Charge it 3
Charge it
let’s get you up and running
Headset Status Light
Green more than 5 hours talk-time
Yellow between 2-4 hours talk-time
Red less than 1 hour talk-time
*You can close the case lid when charging.
Charge
Headset
Charge
Case
Charge
(Micro USB)
Case Charge Status Light
Green fully charged (2 full headset
charges).
Yellow 70% charged (1 full headset
charge).
Red less than 50% charged (less
than 1 headset charge).

4Charge it
Note: When in the case, the headset charges
first
.
Note: The batteries in your headset and charge
case are designed to last the life of your product.
They should only be removed by a recycling
facility. Any attempt to remove or replace a
battery will damage your device.

Connect & go 5
Connect & go
let’s get you connected
Easypair method
Turn Bluetooth on.
T
1
On
2
Put headset on (turn on)
Voice prompt:
“Welcome to Motorola
Elite Sliver”
“ready to pair”
Follow the voice prompts.
Complete.
C
4
Voice prompt:
“pairing complete”
3
Enter “0000”
if prompted
Enter passcode.

6Connect & go
NFC method
With NFC (Near Field Communication), pairing is
as simple as bringing the headset and phone
close to each other.
Note:
If your phone does not support NFC, use the
“
Easypair method ” on page 5.
Put headset in case.
P
1
Complete.
C
3
Touch and hold phone
with bottomof the case.
Status Light = purple
Phone notifies you
when done.
T
2

Connect & go 7
Note: NFCtaglocation variesfrom phone to phone. See
your phone’s user guide for more information.
Note: NFC may vary slightly among phones. The
phone’s display screen must be on when pairing.

8Basics
Basics
standard features, advanced quality
Calls
To…
make a voice
dial call Press the Call button and you hear a tone.
redial last call Press and hold the Call
button until you hear a tone.
mute or
unmute a call Press and hold the Smart button until you hear “mute
on” or “mute off”.
end a call Press the Call button.
change call
volume Press the Smart button while in a call.
answer
second
incoming call
Press the Call button.

Basics 9
Note: Some features and phone/network dependent.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
music
Note: This feature is phone dependent.
Bluetooth® music can be streamed from your
phone. Start and control music playback from
your phone.
While a call is active, music pauses. When the
call ends, music resumes playing.
reject second
call Use phone keypad to reject a second incoming call.
To…

10 Basics
Clean & dry
Get the most from your headset, keep it clean
and dry.
•High humidity or perspiration can make the
ear fitting feel slippery. Wipe the ear fitting
with a soft cloth to remove dirt and moisture.
Note: Be very careful when wiping near the
sensor.
•Check for and remove any debris that may be
blocking the small speaker port on the
earpiece.

Advanced 11
Advanced
more clever stuff
second device
Using two phones? Or maybe a tablet and a
phone? Pair with two devices.
•Before pairing the second device, turn off the
Bluetooth feature of the previously paired
device. Now pair your second device as
normal, see “Connect & go” on page 5.
•Once paired, to connect to both devices
simply turn them on. You’ll hear “<phone x>
connected” as each device connects with
your headset.
•To use headset features, such as voice dial
and redial, with the desired device, just use
the feature as normal and follow the voice
prompts.
•To use the NFC method to pair, see “NFC
method” on page 6.

12 Advanced
Cool features
Note: These features don’t work for second incoming
calls.
CALLER ID
If your phone knows your caller’s number, then
you hear “call from <number>” on an incoming
call.
Note:
Some features are phone/network dependent.
Call time
You hear a voice prompt telling you how much
talk time you have left when turning on your
headset.
To savebattery power, turn off theheadset when
you don't use it for an extended time.

Advanced 13
Status light
if light shows… your headset is…
three blue flashes powering on/off
quick red flash low battery
steady purple NFC pairing mode

14 Advanced
Settings
Press and hold the Call button while turning on
the headset to turn these features on/off, then
follow the voice prompts to change them:
•Language selection
•Reset to factory default
Caution: This action erases all pairing
information stored in your headset.
•Voice Interface
•Caller ID
•Multipoint (two phone) connections
•WBA (Wide-band Audio) on/off

Want more? 15
Want more?
we’ve here to help
Troubleshooting
A few frequently asked questions—with
answers, of course. Find more at
www.motorola.com/support.
My headset will not enter pairingmode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is flashing in blue, first turn off the other
device, then turn the headset off and on. You
hear “ready to pair”.
My phone doesn't find my headset when
searching.
Press and hold the Call button and turn your
headset off then on (close and reopen earpiece).
Follow voice prompts to reset headset. You hear

16 Want more?
“Welcome to the Motorola Elite Sliver. Ready to
pair.”
My headset will not pair with my phone.
Press and hold the Call button and turn your
headset off then on (close and reopen earpiece).
Follow voice prompts to reset headset. You hear
“Welcome to the Motorola Elite Sliver. Ready to
pair. ”
My headset connected before, but now it's
not working.
Make sure your phone is on and the Bluetooth®
feature is turned on in your phone. If the
Bluetooth feature was turned off or was turned
on only temporarily, you may need to restart the
Bluetooth feature and pair your phone and
headset again. See “second device” on page 11.

Want more? 17
Connect with Motorola
Get what you need:
•Answers:User guides, online help and more
at www.motorola.com/support.
• Bluetooth: If you have questions or need
assistance, contact us at 1-877-MOTOBLU, or
visit www.motorola.com/bluetoothsupport or
www.motorola com/bluetoothconnect.
•Accessories: Find more accessories at
www.motorola.com/products.
•Social: The latest news, tips & tricks, videos
and so much more—join us on:
YouTube™ www.youtube.com/motorola
Facebook™
www.facebook.com/motorola
Twitter www.twitter.com/motomobile

18
Safety, Regulatory & Legal
Battery Use & Safety
DON’Ts
• Don’tlettheproduct comeincontactwith liquids.*
Liquidscangetinto
the product’s circuits, leading to corrosion.
• Don’t place your product near a heat source.* High temperatures can
cause the battery to swell, leak, or malfunction.
• Don’t dry a wet or damp product with an appliance or heat source ,
such as a hair dryer or microwave oven.
DOs
• Do avoid leaving your product in your car in high temperatures.*
• Do avoid dropping the product.* Dropping your product,especially on a
hardsurface,can potentially cause damage.*
• Do contact your retailer or Motorola if your product has been
damaged by dropping, liquids or high temperatures.
Warning:
Never dispose of battery powered products in a fire because they
mayexplode.
Battery Charging
Battery Charging
Notes for charging your product’s battery:
• During charging, keep your battery and charger near room temperature for
efficientbattery charging.
• New batteriesare not fully charged.