Motorola MD1600 User manual

MD1600 Software Update v1.0.0.6
What’s New in this Release
• The Internet Connection page will now automatically refresh to show the current Status
message.
• Fixed CenturyLink IPoE DHCP and PPPoE Priority Tag 0.
Instructions for the Software Upgrade for the MD1600
Note: It is very important that there are no interruptions to the upgrade process of the software
as it could cause irreparable damage to the unit. We recommend that you use an Ethernet cable
connection from your computer to the router.
If you are using a laptop, make sure that it has sufficient power to complete the process.
1. Download the software file to your computer and make note of the location you saved it to.
2. Connect your computer to the router with an Ethernet cable.
3. Open your web browser (Internet Explorer, Chrome, Safari, etc.) Type in
192.168.0.1
into the
address bar.
Enter the username:
admin
Enter the password:
motorola
and click
Login

4. Click Advanced at the top menu.
5. On the left side, click
Management
>
Update Software
.
6. Click Choose File.

7. Go to the location on your computer where you saved the software file and click on the file.
Then click OPEN.
8. Now click Update Software. You will see the progress in the bottom left side of your screen.
9. Once the software upgrade has completed, your MD1600 will reboot. Close browser and
wait for the power light to turn solid green (on the modem). Once the power light is solid
green, you can open your browser and log back in to the modem if you would like.