Motorola Netopia R910 User manual

Netopia Router Console cable
You may need this later,
but not now.
Power Adapter Netopia CD
Software &
reference manuals.
2 twisted pair cables
For DSL connection and
10/100 BaseT Ethernet.
Next. Connect the Router.
Computer on Ethernet
Windows PC or Macintosh
on Ethernet with TCP/IP
installed.
First. Locate all items in your box that you need for the installation. You'll also need a computer on Ethernet.
Connect The Router
R910 Ethernet Router
Configure The Router
Launch your Telnet application
Follow the instruction on the next page to run Telnet and complete your
Netopia Router's Easy Setup procedure.
OVER
Console Power
Line 1
Ethernet
WAN Ethernet
Modem
Connect the Ethernet cable.
Connect one twisted-pair cable
between the switch on the router
and the Ethernet port on your
computer.
Connect the Power adapter.
Connect the mini-DIN8 connector
of the power adapter to the power port.
Plug the other end into an
electrical outlet.
2WAN Line
3Power
Connect one twisted-pair cable or cross-over
cable between the Line 1 port on the router
and the Ethernet port on your DSL or cable
modem.
Connect the DSL or cable modem to the
wall jack, according to the manufacturer's
instructions.
Do NOT connect the router's Ethernet WAN
port to an ordinary telephone line.
Connect the Line port to the wall jack
or to your Internet connection device.
1 Ethernet
1
2
3
4

Launch Telnet
Be sure your PC or Macintosh network software is set to obtain a dynamically assigned (DHCP) IP address from the router. If you don’t know how to do this,
refer to the on-line documentation on the Netopia CD. Then:
• Windows users click on the SS
SStt ttaa aarr rrtt tt
menu, select RR
RRuu uunn nn
, and in the resulting entry box, type “ telnet 192.168.1.1 " (without the quotes).
• Macintosh OS X users launch the TT
TTee eerr rrmm mmiiiinn nnaa aallll
application, either from the Dock or from the Utilities folder, and type
“ telnet 192.168.1.1 " (without the quotes).
• Classic Macintosh OS users need to install the NCSA Telnet application, included on the Netopia CD. Then launch NCSA Telnet and type “ telnet
192.168.1.1 " (without the quotes).
NN
NNOO OOTT TTEE EE:: ::
Advanced configuration options available via Telnet are explained in the online documentation on your Netopia CD.
The Netopia MM
MMaa aaiiiinn nn MM MMee eenn nnuu uu
appears in your Telnet window.
Easy Setup
1. Select EE
EEaa aass ssyy yy SS SSee eett ttuu uupp pp
and press Return. The Configuration screens appear. In the console screens, move from field to field with the arrow keys. Select
items with the RR
RRee eett ttuu uurr rrnn nn
key, and toggle items with the TT
TTaa aabb bb
key followed by RR
RRee eett ttuu uurr rrnn nn
. Use the DD
DDoo ooww wwnn nn
arrow key until you get to NN
NNEE EEXX XXTT TT SS SSCC CCRR RREE EEEE EENN NN
and
press Return.
2. As you navigate through the three or four Easy Setup screens (depending on whether you are using PPPoE authentication), you may need to config-
ure the following parameters using information provided by your service provider:
Down arrow key to RESTART DEVICE to reboot the router and activate your settings.
The router will restart and your configuration settings will be activated. You can then Exit or Quit your Telnet application.
Refer to the online documentation for additional advanced configuration options.
NN
NNee eett ttoo oopp ppiiiiaa aa PP PPaa aarr rrtt tt NN NNuu uumm mmbb bbee eerr rr:: ::
6161086-00-05
WAN Ethernet Configuration Screen
Address Translation
Enabled:
❑
Yes (default) or
❑
No
Obtain WAN address via DHCP:
❑
On (default) or
❑
Off
Local WAN IP Address
(if Obtain WAN address via
DHCP is Off)
_______________________
(0.0.0.0 is default)
Local WAN IP Mask:
(if Local WAN IP Address is other
than 0.0.0.0)
_______________________
Easy Setup Profile Screen
Underlying Encapsulation
❑
None (default) or
❑
PPPoE
PPP Authentication
(if Underlying
Encapsulation is PPPoE)
❑
PAP (default) or
❑ CHAP
❑
None
PAP User Name/
CHAP Host Name: _______________________
PAP Password/
CHAP Secret: _______________________
Address Translation
Enabled:
❑
Yes (default) or
❑
No
IP Addressing
❑
Unnumbered (default)
❑
Numbered
Remote IP Address: _______________________
(127.0.0.2 is default)
Remote IP Mask: _______________________
(255.255.255.255 is default)
Local WAN IP Address:
(Numbered IP addressing
only)
_______________________
(0.0.0.0 is default)
Local WAN IP Mask:
(Numbered IP addressing only) _______________________
IP Easy Setup Screen
Ethernet IP Address:
Ethernet Subnet Mask:
_______________________
_______________________
(192.168.1.1 default)
(255.255.255.0 default)
Domain Name: _______________________
Primary Domain Name
Server: _______________________
Secondary Domain Name
Server: _______________________
Default IP Gateway: _______________________
IP Address Serving:
❑
On (default) or
❑ Off
Number of Client IP
Addresses:
_______________________
(100 is default)
1st Client Address: _______________________
(192.168.1.100 is default)
Easy Setup Security Configuration Screen
Write Access Name: _______________________ Write Access Password: _______________________