Motorola WS5100 Series Instruction Manual

M
WS5100 Series Switch
CLI Reference Guide

© 2008 Motorola, Inc. All rights reserved.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Symbol is
a registered trademark of Symbol Technologies, Inc. All other product or service names are the
property of their respective owners.

About This Guide
This preface introduces the WS5100 Series CLI Reference Guide and contains the
following sections:
•Who Should Use this Guide
•How to Use this Guide
•Conventions Used in this Guide
•Motorola Service Information
•Motorola, Inc. End-User License Agreement
Who Should Use this Guide
The WS5100 Series CLI Reference Guide is intended for system administrators
responsible for the implementing, configuring, and maintaining the WS5100 switch using
the switch’s command line interface (CLI). It also serves as a reference for configuring and
modifying most common system settings. The administrator should be familiar with
wireless technologies, network concepts, ethernet concepts, as well as IP addressing and
SNMP concepts.

WS5100 Series Switch CLI Reference Guide
viii
How to Use this Guide
This guide will help you implement, configure, and administer the WS5100 switch and
associated network elements. This guide is organized into the following sections:
Chapter Jump to this section if you want to...
Chapter 1, “Introduction” Review the overall feature-set of the WS5100 switch,
as well as the many configuration options available.
Chapter 2, “Common
Commands”
Summarizes the commands common amongst many
contexts and instance contexts within the WS5100
switch command line interface.
Chapter 3, “User Exec
Commands”
Summarizes the User Exec commands within the
WS5100 switch command line interface.
Chapter 4, “Privileged Exec
Commands”
Summarizes the Priv Exec commands within the
WS5100 switch command line interface.
Chapter 5, “Global
Configuration Commands”
Summarizes the Global Config commands within the
WS5100 switch command line interface.
Chapter 6, “crypto-isakmp” Summarizes the crypto-isakmp commands within the
WS5100 switch command line interface.
Chapter 7, “crypto-group” Summarizes the crypto-group commands within the
WS5100 switch command line interface.
Chapter 8, “crypto-peer” Summarizes the crypto-peer commands within the
WS5100 switch command line interface.
Chapter 9, “crypto-ipsec” Summarizes the crypto-ipsec commands within the
WS5100 switch command line interface.
Chapter 10, “crypto-map” Summarizes the crypto-map commands within the
WS5100 switch command line interface.
Chapter 11, “crypto-
trustpoint Instance”
Summarizes the crypto trustpoint commands
within the WS5100switch command line interface.

ix
Conventions Used in this Guide
This section describes the following topics:
•Annotated Symbols
•Notational Conventions
Chapter 12, “interface
Instance”
Summarizes the config-if commands within the
WS5100 switch command line interface.
Chapter 13, “spanning tree-
mst Instance”
Summarizes the (config-mst) instance commands
within the WS5100 switch command line interface.
Chapter 14, “Extended ACL
Instance”
Summarizes the config-ext-nacl commands within
the WS5100 switch command line.
Chapter 15, “Standard ACL
Instance”
Summarizes the config-std-nacl commands within
the WS5100 switch command line.
Chapter 16, “Extended MAC
ACL Instance”
Summarizes the config-ext-macl commands within
the WS5100 switch command line.
Chapter 17, “DHCP Server
Instance”
Summarizes the (config-dhcp pool) commands
within the WS5100 switch command line.
Chapter 18, “DHCP Class
Instance”
Summarizes the (config-dhcp-class) instance
commands within the WS5100 switch command line
interface.
Chapter 19, “Radius Server
Instance”
Summarizes the (config-radsrv) instance
commands within the WS5100 switch command line
interface.
Chapter 20, “Wireless
Instance”
Summarizes the (config-wireless) instance
commands within the WS5100 switch command line
interface.
Chapter 21, “SOLE Instance” Summarizes the (config-sole) instance commands
within the WS5100 switch command line interface.
Chapter Jump to this section if you want to...

WS5100 Series Switch CLI Reference Guide
x
Annotated Symbols
The following document conventions are used in this document:
Notational Conventions
The following notational conventions are used in this document:
• Italics are used to highlight specific items in the general text, and to identify chapters
and sections in this and related documents.
• Bullets (•) indicate:
• action items
• lists of alternatives
• lists of required steps that are not necessarily sequential
• Sequential lists (those describing step-by-step procedures) appear as numbered lists.
NOTE: Indicate tips or special requirements.
CAUTION: Indicates conditions that can cause equipment damage or
data loss.
WARNING! Indicates a condition or procedure that
could result in personal injury or equipment damage.
Convention Example Token Description Valid Inputs
bold Bold text indicates commands
and keywords that you enter
literally
italics Italic text indicates arguments
for which you supply values.
() (on|off) Grouping (exactly one of a list of
tokens)
on
!

xi
Motorola Service Information
Use the Motorola Support Center as the primary contact for any technical problem,
question, or support issue involving Motorola products. Motorola Support Center responds
to calls by email, telephone or fax within the time limits set forth in individual contractual
agreements:
Telephone (North America): 1-800-653-5350
Telephone (International): [phone]
Fax: [phone]
Email: [email protected]
When contacting Motorola Support Center, please provide the following information:
• Serial number of the unit.
• Model number or product name.
• Software type and version number.
{} {key1|key2|key
3}
Selective recursive (multiple
tokens allowed, but each can
only be used once)
key1 key3
[ ]
[key1|key2|key
3]
Infinite recursive (multiple
tokens allowed, each can be
used multiple times)
key1 key1 key2 key3
key2 key3
. .<1-10> Simple infinite recursive 1 2 6
? [key1|?key2] Selective keyword in infinite
recursive (multiple tokens, but
you can pick one that’s only
allowed once)
key1 key1 key2
Convention Example Token Description Valid Inputs

WS5100 Series Switch CLI Reference Guide
xii
Customer Support Website
Comprehensive on-line support is available at the MySymbolCare Web site at
http://www.symbol.com/support/ . Registration is free and a variety of services can be
linked through this Web portal.
Product Sales and Product Information
General Information
For general information, contact Motorola at:
Telephone (North America): 1-800-722-6234
Telephone (International): [phone]
Website: http://www.motorola.com
North America International
Motorola, Inc.
One Symbol Plaza
Holtsville, New York 11742-1300
Tel: [phone] or
1-800-722-6234
Fax: [phone]
Motorola, Inc.
Symbol Place
Winnersh Triangle, Berkshire, RG41 5TP
United Kingdom
Tel: [phone] (Inside UK)
[phone] (Outside UK)

xiii
Motorola, Inc.
End-User License Agreement
BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE DESCRIBED IN THIS DOCUMENT, YOU
OR THE ENTITY OR COMPANY THAT YOU REPRESENT ("LICENSEE") ARE UNCONDITIONALLY
CONSENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO THIS LICENSE AGREEMENT
("AGREEMENT"). LICENSEE'S USE OR CONTINUED USE OF THE DOWNLOADED OR INSTALLED
MATERIALS SHALL ALSO CONSTITUTE ASSENT TO THE TERMS OF THIS AGREEMENT. IF LICENSEE
DOES NOT UNCONDITIONALLY AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT
CONTINUTE THE INSTALLATION PROCESS. IF THESE TERMS ARE CONSIDERED AN OFFER,
ACCEPTANCE IS EXPRESSLY LIMITED TO AND EXPRESSLY CONTINGENT UPON THESE TERMS. IF
YOU ARE ACCEPTING THESE TERMS ON BEHALF OF A COMPANY, ANOTHER PERSON OR ANY
OTHER LEGAL ENTITY, YOU REPRESENT AND WARRANT THAT YOU HAVE THE AUTHORITY TO BIND
THAT COMPANY, PERSON OR ENTITY.
1. LICENSE GRANT. Subject to the terms of this Agreement, Motorola, Inc. and/or its
subsidiaries ("Licensor") hereby grants Licensee a limited, personal, non-sublicensable, non
transferable, nonexclusive license to use the software that Licensee is about to download
or install and the documentation that accompanies it (collectively, the "Software") for
Licensee's personal use in connection with hardware produced by Licensor and only in
accordance with the accompanying documentation. Licensee may download, install and use
the Software only on a single computer. Licensee may make one copy of the Software
(excluding any documentation) for backup purposes, provided that copyright and other
restricted rights notices of Licensor and its suppliers are reproduced exactly.
2. LICENSE RESTRICTIONS. Except as expressly permitted by this Agreement, Licensee shall
not, nor permit anyone else to, directly or indirectly: (i) copy (except for one backup copy),
modify, distribute or create derivative works based upon the Software; (ii) reverse engineer,
disassemble, decompile or otherwise attempt to discover the source code or structure,
sequence and organization of the Software; or (iii) rent, lease, or use the Software for
timesharing or service bureau purposes, or otherwise use the Software for any commercial
purpose/on behalf of any third party. Licensee shall maintain and not remove or obscure any
proprietary notices on the Software, and shall reproduce such notices exactly on all
permitted copies of the Software. All title, ownership rights, and intellectual property rights
in and to the Software, and any copies or portions thereof, shall remain in Licensor and its
suppliers or licensors. Licensee understands that Licensor may modify or discontinue
offering the Software at any time. The Software is protected by the copyright laws of the
United States and international copyright treaties. The Software is licensed, not sold. This
Agreement does not give Licensee any rights not expressly granted herein.

WS5100 Series Switch CLI Reference Guide
xiv
3. INTELLECTUAL PROPERTY; CONTENT. All title and intellectual property rights in and to the
Software (including but not limited to any images, photographs, animations, video, audio,
music, text and "applets" incorporated into the Software), and any copies you are permitted
to make herein are owned by Licensor or its suppliers. All title and intellectual property
rights in and to the content which may be accessed through use of the Software is the
property of the respective content owner and may be protected by applicable copyright or
other intellectual property laws and treaties. This EULA grants you no rights to use such
content. As a condition to Licensee's use of the Software, Licensee represents, warrants
and covenants that Licensee will not use the Software: (i) to infringe the intellectual
property rights or proprietary rights, or rights of publicity or privacy, of any third party; (ii) to
violate any applicable law, statute, ordinance or regulation; (iii) to disseminate information
or materials in any form or format ("Content") that are harmful, threatening, abusive,
harassing, tortuous, defamatory, vulgar, obscene, libelous, or otherwise objectionable; or (iv)
to disseminate any software viruses or any other computer code, files or programs that
mayinterrupt, destroy or limit the functionality of any computer software or hardware or
telecommunications equipment. Licensee, not Licensor, remains solely responsible for all
Content that Licensee uploads, posts, e-mails, transmits, or otherwise disseminates using,
or in connection with, the Software.
4. FEES; SUPPORT AND UPGRADES. Licensor may, at Licensor's sole option, provide support
services related to the Software ("Support Services"). Nothing in this Agreement grants
Licensee any right to receive any Support Services. Use of any Support Services provided is
governed by the Licensor policies and programs described in the user manual, in "online"
documentation, and/or in other Licensor-provided materials or support agreements. Any
supplemental software code provided to you as part of any Support Services shall be
considered part of the Software and subject to the terms and conditions of this EULA. With
respect to technical information you provide to Licensor as part of any Support Services,
Licensor may use such information for its business purposes, including for product support
and development. Licensor will not utilize such technical information in a form that
personally identifies Licensee.
5. TERMINATION. Either party may terminate this Agreement at any time, with or without
cause, upon written notice. Any termination of this Agreement shall also terminate the
licenses granted hereunder. Upon termination of this Agreement for any reason, Licensee
shall return all copies of the Software to Licensor, or destroy and remove from all computers,
hard drives, networks, and other storage media all copies of the Software, and shall so
certify to Licensor that such actions have occurred. Sections 2-13 shall survive termination
of this Agreement.