Moultrie M-Series User manual

Instructions for M-Series Digital Game Cameras
THANK YOU for your purchase of an M-Series Digital Game Camera. Please read this booklet before using the unit. If you should
have any questions about this product or any other Moultrie product, please contact us using the information on the back of
this booklet. Please register your camera at www.moultriefeeders.com/warranty to activate your warranty.
Status Indicator
Infrared LED Flash
Menu Button
Navigation Buttons
SD Card Slot
Camera Lens
LCD Display
Mode Selector Switch
Motion Sensor
Release for
Battery Compartment
www.moultriefeeders.com
FCC Statements
Moultrie Products
MCG-13181
Note: changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- lncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Moultrie Products
MCG-13182
09282016 / MCG-13181 • MCG-13182
M-40iM-40
PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Calera, AL 35040
Light Sensor
Micro USB Port
External Power Port

Important Battery lnformation
- Only use Alkaline or Lithium batteries. We recommend the use of Energizer batteries.
- Do not mix old and new batteries. Always replace ALL the batteries at the same time.
- When the camera is not in use, please remove the batteries.
Moultrie Limited Warranty
This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the
date of purchase for 2 years. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been found to
be defective in original material or workmanship. Should you require in-warranty service, call our Customer Service Department. If your problem
cannot be addressed over the telephone, we may need you to send us your defective product plus proof of purchase.
You must register your camera at www.moultriefeeders.com/warranty to activate your 2-year warranty.
Troubleshooting
Please visit www.moultriefeeders.com/contact-us for troubleshooting and helpful tips.
Returns and Repairs
Please visit http://www.moultriefeeders.com/return-policy and complete the form or our Service Department will gladly answer any questions
you have. Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.
MOULTRIE MOBILE® COMPATIBILITY
Your camera is compatible with our Moultrie Mobile® cellular service when combined with the Field Modem MV1. Please visit www.moultriemobile.com
for more information.
MOULTRIE M-SERIES
2 15
RESET
OPTIONS
INFOSTRIP
OPTIONS
MOTION + T.L.
MAIN SCREEN
TIME LAPSE
MAIN SCREEN
MOTION DETECT
MAIN SCREEN
DATE & TIME
START MOTION +
T.L. CAPTURE
START TIME
LAPSE CAPTURE
START MOTION
DETECT CAPTURE
CAMERA NAME
*If Timelapse Program #1 is set to Always On,
settings for Program #2 will be disabled.
T.L. PROGRAM #1
START TIME
TIMELAPSE
INTERVAL
DETECTION
DELAY
PIR
SENSITIVITY
MULTI-SHOT
PHOTO OR
VIDEO
T.L. PROGRAM #1
STOP TIME
T.L. PROGRAM #2
START TIME
T.L. PROGRAM #2
STOP TIME
RESET
OPTIONS
*Set options in the respective menus.
TEMPERATURE
(ºF OR ºC)
INFOSTRIP
ACTIVE
PHOTO/VIDEO
OPTIONS PHOTO QUALITY MOTION FREEZE
VIDEO QUALITY
VIDEO LENGTH
MEMORY
OPTIONS ERASE ALL IMAGES MANAGED MEMORY
SYSTEM
OPTIONS
PROGRAM
SECURITY CODE
UPGRADE
FIRMWARE
FACTORY RESET CONFIRM
SECURITY CODE

RESET
OPTIONS
INFOSTRIP
OPTIONS
MOTION + T.L.
MAIN SCREEN
TIME LAPSE
MAIN SCREEN
MOTION DETECT
MAIN SCREEN
DATE & TIME
START MOTION +
T.L. CAPTURE
START TIME
LAPSE CAPTURE
START MOTION
DETECT CAPTURE
CAMERA NAME
*If Timelapse Program #1 is set to Always On,
settings for Program #2 will be disabled.
T.L. PROGRAM #1
START TIME
TIMELAPSE
INTERVAL
DETECTION
DELAY
PIR
SENSITIVITY
MULTI-SHOT
PHOTO OR
VIDEO
T.L. PROGRAM #1
STOP TIME
T.L. PROGRAM #2
START TIME
T.L. PROGRAM #2
STOP TIME
RESET
OPTIONS
*Set options in the respective menus.
TEMPERATURE
(ºF OR ºC)
INFOSTRIP
ACTIVE
PHOTO/VIDEO
OPTIONS PHOTO QUALITY MOTION FREEZE
VIDEO QUALITY
VIDEO LENGTH
MEMORY
OPTIONS ERASE ALL IMAGES MANAGED MEMORY
SYSTEM
OPTIONS
PROGRAM
SECURITY CODE
UPGRADE
FIRMWARE
FACTORY RESET CONFIRM
SECURITY CODE
MENU MAP
314
SYSTEM OPTIONS (cont.)
J
Upgrade Firmware
The firmware version is displayed.
YES - To upgrade rmware.
NO - Keep current firmware.
NOTE: This operation should only be performed when rmware update is required.
UPGRADE FIRMWARE
4M40-130903 NO

MODE SWITCH
Aim - When Aim is ON and the PIR Motion Sensor detects motion, the Status Indicator’s red LED on the front of the camera will come on and remain lit
as long as motion is detected. Custom Start - set and run camera with custom settings. Quick Start - set and run camera with pre-dened settings.
NAVIGATION BUTTONS
The Menu Button selects Camera Setup or Main Screen. When camera mode is selected, the LEFT and RIGHT buttons navigate through the menu
options. The Menu Button is also used to wake-up the camera and turn on the display when the camera is in power saving (or sleep) mode. The
OK button selects the item to be changed. The UP/DOWN and LEFT/RIGHT buttons are used to step through and modify the menu options. Pressing
the OK button again, selects the option indicated on the display. The OK button is also used to manually take a picture.
BATTERY COMPARTMENT
The camera is powered by eight (8) AA alkaline or lithium batteries. Push the battery compartment release button to eject the battery tray. Install
batteries as indicated on the engravings on the battery tray, taking care to note the correct polarity. See Important Battery Information section on
Page 15 of this manual.
SD CARD SLOT
Accepts up to a 32GB SD Card (Class 4 or higher) for photo and video storage. NOTE: A Class 4 or higher SD Card must be installed for the camera to
operate (sold separately). Ultra/turbo SD cards are not recommended.
USB PORT
Download still pictures and video onto your computer by connecting a micro-B to USB cable (not included) to the USB port.
EXTERNAL POWER PORT
Accepts the Moultrie power accessories (sold separately) only. Refer to www.moultriefeeders.com for more information.
NOTE: The use of any other power source will void your warranty and possibly harm your camera.
CAMERA OVERVIEW
A
4 13
SYSTEM OPTIONS
J
Security Code
Select a 5 digit security code for your camera.
NOTE: Please remember your security code. If the code is lost, you can contact
Moultrie customer support to reset the password (charges may apply). Also,
use caution when navigating through the Security Code option as not to set a
code by mistake. For no Security Code, the setting should remain as “00000”.
PROGRAM SECURITY
CODE 00000
Conrm Security Code
Once a Security Code has been entered, the camera will prompt you to verify the code.
This will keep you from mis-entering a code or seting a code inadvertantly.
Reset to Default settings
You can reset your camera to the factory default settings.
Choose either YES - all setups restored to factory default or NO - keep custom settings.
CONFIRM SECURITY
CODE 00000
FACTORY RESET?
NO

QUICK START INSTRUCTIONS
B
12
SETTING PHOTO/VIDEO OPTIONS (cont.)
H
Setting Video Length
Choose between 5 video length settings (5, 10, 30, 60 or 90 seconds).
NOTE: Night videos are limited to a maximum of 30 seconds.
VIDEO LENGTH
10 SECONDS
MEMORY OPTIONS
I
Erase Images
Choose between Yes - erase all images, or No - does not change stored images.
NOTE: This will also format your SD card for use in your camera.
Managed Memory
Selecting the OVERWRITE OLDEST option will cause the oldest les to be overwritten with
new captures when the SD card reaches its capacity. With the DO NOT OVERWRITE option
selected, the camera will cease image capture once the SD card reaches capacity.
ERASE ALL IMAGES
NO
MANAGED MEMORY
DO NOT OVERWRITE
Use the steps below as a guide to quickly set up your camera so it will function using the factory default settings.
STEP 1
Open camera cover. Install eight (8) AA size alkaline or lithium batteries with polarities as indicated in the Battery Tray. Insert your SD card. We
recommend that you erase the SD card (ERASE IMAGES) inside the camera before taking pictures: this will not only erase all images, but will also
format your SD card for use in the camera. Camera will not operate without SD card. Switch camera to Quick Start.
STEP 2
Mount camera in desired location using a mounting strap. The camera also has two Python™
Cable Loops for added security. NOTE: Camera must be attached to a stable object for
motion detection to function properly. Mounting camera on an unstable structure may
result in excess image captures with no subject (false triggers).
STEP 4
Close cover. The camera will operate using Default settings. You may also
customize the settings if desired in Custom Start.
STEP 3
Switch camera to Aim. Aim camera using motion detection to determine
target area. Walk in front of the camera at the desired distance and the
camera LED will ash showing the covered area.
Eyelet
Mounting Strap
5
Setting Run Mode
When you choose Quick Start, the only settings
that you will be able to change will be Date and
Time, allowing for rapid setup. Other settings are:
OPTION SETTING
Mode Motion Detect
Detection Delay 30 seconds
Multi-Shot 3-Triggered
Photo or Video Photo
Python™ Cable
Loops

CAPTURE MODES
C
Setting Capture Mode
Use the Up/Down buttons to choose between operating modes. This camera has 3 modes.
1. Motion Detect - Capture photo or video when motion or heat is detected.
2. Time Lapse - Capture photo at periodic intervals based on the Time Lapse program setting.
3. Motion + Time Lapse - Uses a combination of Time Lapse and Motion Detect modes at dierent times
of the day. Press the Right button to move to start motion capture.
NOTE: Options for Motion and Time Lapse can be set in their respective option menus.
SETTING MOTION DETECT OPTIONS
D
Setup Selection Setting
From the Default Screen, pressing the Menu button will enter the current capture mode’s Main Screen. Press the Down button 3 times to enter
GENERAL SETTINGS. Press the Left button to move to the next setting. Using this method you can customize your camera’s feature settings.
From this Main Screen, press OK to get to the Test Capture screen. See pages 1 & 2 for the full layout of the camera menu.
For all menu navigation, use UP/DOWN to change and LEFT/RIGHT to navigate between options and OK to lock-in your selection.
6 11
IMAGE REVIEW SOFTWARE INSTALLATION
Download your free Image Review software at www.moultriefeeders.com/imagesoftware
For PC users: Installation and operation instructions are available here, as well.
For Mac users: This software is not Mac-compatible. You can import your image les into a program such as iMovie and iPhoto.
SETTING PHOTO/VIDEO OPTIONS
H
Setting Photo Quality
Choose between 4 image resolution settings:
1. Enhanced: 5376 x 3024
2. High: 3840 x 2160
3. Medium: 2688 x 1512
4. Low: 1920 x 1080
PHOTO QUALITY
HIGH(4MP)
Setting Motion Freeze
This feature maximizes the image clarity during night photos. When this feature is on the
camera will adjust the exposure time to reduce blur associated with motion. Other
adjustments are made to increase the brightness and clarity of the photo. When this
feature is turned o the camera will use a maximum exposure time that will not reduce
blur, but will increase the eective ash range and image brightness of night photos.
Setting Video Quality
Choose between 2 image quality settings:
1. HD: 1280 x 720
2. FULL HD: 1920 x 1080
MOTION FREEZE
ON (FAST FLASH)
VIDEO QUALITY
HD (1280X720)

PIR Sensitivity
PIR Sensitivity allows you to control as to how much movement and at what distance
the camera will trigger. HIGH sensitivity will allow for more distance, but will make
the camera slightly more susceptible to false triggers and is ideal for open areas such as
elds and food plots. LOW sensitivity will shorten the distance but lower the chance of
false triggers and is ideal for close range traps and deeply wooded areas.
Setting Multi-Shot
Choose how many pictures you would like captured in a sequence
when the camera is triggered (1 or 3).
Available options are:
1 (OFF) - Single photo taken per event.
3 BURST - Three rapidly captured photos taken per event. All 3 photos are captured within one second.
NOTE: Burst mode is only capable of up to 4MP captures, regardless of your resolution setting.
3 TRIGGERED - Up to three photos are captured per event with an approximate one second delay between each capture. Each subsequent photo
after the rst requires an individual trigger. This allows for multiple potential image captures of the same event while reducing the chance of
empty images if the subject moves out of the eld of view after the rst shot.
710
PIR SENSITIVITY
HIGH
MULTI-SHOT
1 (OFF)
SETTING INFOSTRIP OPTIONS
G
Temperature
The temperature is imprinted on each photo and can be in degrees Fahrenheit or Celsius.
Infostrip Active
Choose between:
YES - Camera Name, Time, etc, information will be imprinted at the bottom
of the image/video as an information bar.
Note: Remember to input the camera name in the setup and set the clock accordingly.
NO - No information bar will be imprinted.
INFOSTRIP ACTIVE
YES
TEMPERATURE
FAHRENHEIT
Event Delay Setting
Detection Delay determines the number of minutes between pictures when an
animal is detected and remains in range. Choose between (NONE, 10 sec, 30 sec,
1 min, 5min, 10min, or 30 min).
DETECTION DELAY
10 SECONDS
Setting Date and Time
IMPORTANT! Use to set date and time.
DATE & TIME
11/11/16 11:11pm
CAMERA NAME
MOULTRIECAM
Setting Camera Name
Select an identity for your camera. For example, you can use a name or a location;
the identity you wish to use is up to you.

SETTING TIMELAPSE OPTIONS
E
Set Frequency of Capture
Choose between 10, 30 seconds / 1, 5, 10, 15, or 30 minutes / 1, 2, 3, 6, 12 hours or 1 day.
Setting Program Start
Choose between 24 dierent settings: any hour from MlDNlGHT to 11 PM. This will
determine what time the camera will wake up during the program and begin its time
lapse program. Setting to ALWAYS ON will make the camera operate in timelapse
24 hours/day.
Setting Program Stop
When start time is set, the camera will automatically move to the Stop option. Set the
Stop time after the Start time you already set. This will set the Start and Stop during
the time lapse photography.
NOTE: Repeat the above steps for each Program #2 to be set.
WARNING: If Program #1 is set to Always On, settings for Program #2 will be disabled.
Reset Options
Use to reset your Timelapse options.
8
T.L. PROGRAM #1
START 6AM
T.L. PROGRAM #1
STOP 10AM
TIMELAPSE
INTERVAL 10 SEC
RESET OPTIONS?
DO NOT RESET
9
Setting Photo or Video
Choose between Photo, Video or Both. “Both” will take a photo, then a video.
Reset Options
Choose between a set of predened congurations for the motion detect
capture mode to quickly congure your camera for certain levels of performance.
PHOTO OR VIDEO
PHOTO
RESET OPTIONS?
DO NOT RESET
SETTING MOTION + TIMELAPSE OPTIONS
F
Setting Motion + Timelapse Features
The camera operates in Motion Detect Mode and Time Lapse Mode during the programmed intervals.
NOTE: The settings entered for both Timelapse and Motion Detect modes will be used when in this mode. Settings can be made in their
respective menus.