Mounting Dream MD2263-XLK User manual

MD2263-XLK INSTALLATION INSTRUCTION
(C2)
42"~86"
Max:800x400mm/32x16"
Min:200x100mm/8x4"
TV
1 2
x1

Before getting started, let’s make sure this mount is perfect for you!
1
Is your TV VESA
equal to/greater than
200x100mm/8x4" and
equal to/less than
800x400mm/32x16"?
2
Does your TV
(including accessories)
weigh less than
120 LBS (54.5 KG)?
4
Installation Tools
(Not Included)
Yes --- Perfect!
No --- This mount is NOT compatible.
MAX:800mm/32"
MAX:
400mm/16"
Yes --- Perfect!
No --- This mount is NOT compatible.
CAUTION:
Drywall with
wood studs?
Band Tape
2M2M
5
Safety Caution
Please read this instruction carefully before installation.
● This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
● The wall must be capable of supporting five times the weight of the TV and mount
combined.
● Do not apply this product to any purpose not indicated by Mounting Dream.
● Incorrect installation may result in product damage or body injury. Mounting Dream shall
bear no responsibility for any damage or injury resulted from incorrect installation,
incorrect assembly or misuse.
Solid concrete
wall?
Pencil Screwdriver Electrodrill Socket Wrench
1/2"(13mm)
Stud Finder Awl 7/32"(5.5mm)
Wood Drill Bit
3/8"(10mm)
Masonry Drill Bit Hammer
1
3
What is your wall
made of?

Parts and Hardware
TV Brackets
x1
M8
M6
1-1 Select TV Screws
TV back
Bracket
Long Screw
Spacer
Yes, go to PAGE 3 for detailed combination.
2
1-2 Need Spacer?
Washer
Highly recommended to add spacers for more
spacing between wall mount and wall.
M6x12mm M8x25mm
M6x35mm
M8x45mm
M6x17mm M8x22mm
M6
10mm 2.5mm
Washers
Spacers
TV Screws
x4
x4
x4
x4
x4
x4
x4 x8
x4
Bracket Washer
No, go to PAGE 3 for detailed combination.
TV back
Short Screw
WARNING:This product contains small items that could be a choking hazard if
swallowed. Before starting assembly, verify all parts are included and undamaged.
NOTE: Not all hardware included will be used.
x1

3
Tips: If you need to combine M6(c) or M8(b/d) screw with 2.5mm spacer(h), you have to
remove the inner circle.
1-3 Attach the TV Brackets
Spacer(s), screw and washer
No!
Screw and washer

For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B on PAGE 6
<16mm
(5/8") 32"(812.8mm)
24"(609.6mm)
/16"(406mm)
Min. Wood Stud Size:
nominal 2"(51mm)
actual 1 1/2"(38mm)
Min. Wood Stud Size:
nominal 4"(102mm)
actual 3 1/2"(89mm)
Wood Stud Installations
4
x4
Parts and Hardware
x2
Assemble Wall plate
Concrete Wall Anchor
4pcs
Wall plate
Wall plate unit
Lag Bolt M8x60mm
M5x8mm Bolt
x8
Mounting Template
Allen Key
x1
x1
Connection Plate

O
Centre line
32"(812.8mm)
24"(609.6mm)
16"(406mm)
7/32"
(5.5mm)
2.6"(65mm)
Go to Step 3 on PAGE 7.
5
Centre line
Again, find another wood stud
CAUTION
:
To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on
to the next step.
Mounting Template
Level
Wall plate unit

Solid Concrete Wall Installation
6
2.6"
(65mm)
Concrete Wall
Anchor
Min.
8"(203mm)
3/8"
(10mm)
DANGER
CAUTION
:
To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on
to the next step.
Mounting Template
Level
Wall plate unit

7
120 LBS (54.5 KG)
Before hanging TV, please conduct "wall plate installation integrity test" first.
PO
TV
1 2
Pull
down

8
4-1 TV leveling adjustment (±1°):
Loosen 2 leveling bolts on the rear of TV plate by maximum 2
turns, adjust to level, and retighten to secure.
4-2 Tilting angle adjustment (+5°/-15°)
：
Loosen handle , adjust TV to your desired position,then tighten
handle .
+5°
-15°
Loosen
Tighten
Loosen
Tighten

9
Pull down
the straps
861mm
222mm
64.5mm
+5°/-15° MAX:800mm
430mm
MAX:400mm