Mounting Solutions UBR Series User manual

Installation Guide
UBR - series
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Installation Guide for UBR-series
U-bracket
Models:
SAFETY INSTRUCTIONS
1. Only entrust loudspeaker mounting equipment to experienced professionals. Also strictly follow the provided safety instructions.
Improperly installed mounting equipment may result in property damage, personal injury and/or liability for the installing
contractor.
2. Always use safety cables! This will prevent equipment from falling during/after setup and while exploiting.
3. Always check if the wall surface is structurally strong enough to support load. Make sure the wall and/or ceiling structure allows
to hold the weight of the speaker including its bracket.
4. Only use appropriate fasteners.
5. Always make sure to securely use and tighten/lock all mounting bolts provided. Loose bolts may become unscrewed over time
due to vibration which could potentially create a safety hazard when not tightened securely.
UBR-300
UBR-500

Installation Guide
UBR - series
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
1. First, remove the bolts and glue the
spacers to the speaker mount.
2. For direct wall/ceiling mounting,
use the adjacent holes on the mounting
plate. For convenience, use this strip to
mark the holes on the wall/ceiling.
Installation Instructions UBR on wall/ceiling:
1
2
3
3. Attach the u-bracket to the wall/
ceiling, do not tighten the bolts. Use
appropriate fasteners to match your
wall/ceiling material.
4. Adjust the width of the U-bracket
according to the width of your speaker
and tighten the bolts.
4

Installation Guide
UBR - series
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
4. Loosen the xing screws on the
speaker, and slide the speaker onto the
U-bracket.
5
6
6. Adjust the pan and tilt angles of the
loudspeaker as required and tighten
the screws to lock in the position of the
loudspeaker.
1. First, unscrew bolt «1», and loosen
two bolts «2».
2. Adjust the width of the U-bracket
according to the width of your speaker
and tighten the bolts.
Installation Instructions UBR with WBM-1:
1
2

Installation Guide
UBR - series
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
3
3. Attach the U-bracket to the WBM-1.
4. Loosen the xing screws on the
speaker, and slide the speaker onto the
U-bracket.
4
4. Adjust the pan and tilt angles of
the loudspeaker as required and tighten
the screws to lock in the position of the
loudspeaker.
5

Installation Guide
UBR - series
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Installation Instructions UBR with CMT-HS:
1. First, unscrew bolt «1» and bolts «2».
2.Attachthe CMT-HStotheU-bracket,
without tightening the bolts.
1
2
3
3. Adjust the width of the U-bracket
according to the width of your speaker
and tighten the bolts.
4. Attach the CMT-HS with the
U-bracket to the distance tube.
4

Installation Guide
UBR - series
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
4. Loosen the xing screws on the
speaker, and slide the speaker onto the
U-bracket.
5
6
6. Adjust the pan and tilt angles of the
loudspeaker as required and tighten
the screws to lock in the position of the
loudspeaker.