Mountz EC Series User manual

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
1
Dec 3rd, 2020
MDC V@
Using Controller’s Display

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
2
Table&of&Contents&
GENERAL SAFETY RULES .......................................................................................................................... 2
Operation ............................................................................................................................................... 5
Operation Screen and Main Menu ..................................................................................................................... 5
Parameters ............................................................................................................................................. 7
Fastening ........................................................................................................................................................... 8
Advanced ........................................................................................................................................................... 9
Screw Counting ................................................................................................................................................ 10
I/O Settings ...................................................................................................................................................... 11
Controller Settings ........................................................................................................................................... 12
Network Settings ............................................................................................................................................. 13
Multi-Sequence ................................................................................................................................................ 13
Model select .................................................................................................................................................... 14
Parameters Groups ............................................................................................................................... 15
Parameter details and factory setting ................................................................................................... 16
Monitoring ........................................................................................................................................... 31
Monitoring Graph, Monitoring I/O been used ................................................................................................. 32
Monitor Network Settings, Monitoring Error Codes ......................................................................................... 32
Remote Functions ................................................................................................................................. 33
Remote Output ................................................................................................................................................ 34
Auto Customizing ............................................................................................................................................. 34
Back-Up ........................................................................................................................................................... 35
Restore ............................................................................................................................................................ 35
Power Reset ..................................................................................................................................................... 35
Factory Reset ................................................................................................................................................... 35
Settings ................................................................................................................................................ 36
Data & Time ..................................................................................................................................................... 37
Options ............................................................................................................................................................ 37
Barcode ........................................................................................................................................................... 38
Storage ............................................................................................................................................................ 38

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
3
GENERAL SAFETY RULES
WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric
shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
Grounded tools must be plugged into an outlet properly installed and grounded by all codes and ordinances. Never
remove the grounding prong or modify the plug in any way. Do not use ungrounded plugs? . Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction
or break down, grounding provides a low resistance path to carry electricity away from the user.
Avoid body contact with grounded surface and pipes, radiators, ranges, and refrigerators. There is an increased risk of
electric shock if your body is grounded.
Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock
Take care when using and handling the power/data cord. Never use the cord to carry the tools or pull the plug from an
outlet. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately.
Damaged cords increase the risk of electric shock.
When operating a power tool outside, use an outdoor extension cord marked W-A or W. These cords are rated for
outdoor use and reduce the risk of electric shock.
Personal Safety
Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired
or under the influence of drugs, alcohol, or medication. A moment of inflation while operating power tools may result in
serious personal injury.
Dress according to local safety guidelines . Do not wear loose clothing or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Avoid accidental starting of tool(s). Be sure the switch is off before plugging in. Carrying tools with your finger on the
switch or plugging in tools may result in personal injury.
Remove adjusting keys or switches before turning the tool on. A wrench or a key that is left attached to a rotating part
of the tool may result in personal injury.
. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected
situations.
Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.
Tool use and Care
Use clamps or another practical way to secure and support the workplace to a stable platform. Holding the work by
hand or against your body is unstable and may lead to loss of control.
Do notoperate a tool beyond its defined limits. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
Do not use the tool if the switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous
and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained
users.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges, are
less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the
operation of the tool. If damaged, have the tool serviced before using it. Many accidents are caused by poorly
maintained tools.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool, may become hazardous when used on another tool.

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
4
SERVICE
Tool service must be performed only by qualified personnel. Service or maintenance performed by unqualified
personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or
injury.
SPECIFIC SAFETY RULES
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring
or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
Never lubricate aerosol oil on to the electrical part.

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
5
Operation
Operation Screen
Main Menu
• Main Menu
• Running Torque /
Units
• Programmed
Torque
• Time to reach
torque
• Count actual / set
• Page Name
Preset (Model) # (1 – 15)
• Actual / Set Speed
Angle
• Snug Angle
Tool Name – Helps identify what tool
the controller is for
• Back – Goes to previous page
• Parameter – Create a custom
procedure (define it better than
me)
• Remote – Operate
tool…remotely?
• Monitoring – View analytics for
viewing data and troubleshooting
• Setting – System configuration
and additional features
• Logout – Return to Operation
Screen. Locks system to prevent
changes

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
6
TOUCH SCREEN
TECHNOLOGY

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
7
Parameters
1
2
3
4
5
6
7
8
• Total of (15) Standard Preset + (2)
Multi-Sequence Presets
• Each preset can be adjusted to
these main MODES:
o 1. FASTENING
o 2. ADVANCED
o 3. SCREW COUNT
o 4. I/O
o 7. MULTI SEQUENCE
o 8. MODEL

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
8
1. Fastening
Fastening Features Page “A”
• Torque Control / Angle Monitoring
OR Angle Control and Torque
Monitoring
• Target Torque
• Torque limits %
• Snug Torque
• Target Speed
• Target Angle
• Min Angle
• Max Angle
• Angle to free speed
Fastening Features Page “B”
• Free speed
• Soft Start
• Torque Setting Point %
• Torque Rising time
• Ramp Up Speed
• Torque Compensation %

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
9
2. Advanced
Advanced Features Page “A”
• Free Reverse Rotation
o Speed
o Angle
• Thread Tapping / Opening thread
o Min thread units
o Max thread units
o Speed
o Thread tapping end torque
o Angle start after thread
tapping (ON/OFF)
Advanced Features Page “B”
• Engaging Torque Detection
o Speed
o Torque %
o Angle Limit
o Time Limit
o Angle Start from
Engagement (ON/OFF)
• Angle After Torque Up
o Speed
o Angle
o Direction (FW/REV)

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
10
3. Screw Counting
Screw Counting Features
• Cycle start signal
• Time Limit
• Count port signal type
• Middle Count
• Sensor signal delay time
• Total Count

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
11
4. I/O

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
12
5. Controller

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
13
6. Network
7. Multi Sequence
Multi-Sequence Arrangements option
A and B
• Fastening
• End
• Delay
• Preset
• Loosening
• Jump
• Count Value condition
• Sub If Condition

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
14
8. Model
Modeling Features
• Up to (20) steps combining:
o Fastening
o Delays
o Input
o Output

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
15
Parameters Groups
Group
Parameter
Address
1. Fastening
Preset #1 to #15
A001 – A225
2. I/O
Input
A226 – A233
Output
A234 – A241
3. Screw count
Number & cycle start
A242 – A247
4. Crow foot option
A265 – A269
5. Controller
A270 – A306
6. Network
IP address
A307 – 320
7. Multi sequence
Multi-A, Multi-B
A321 – 340
8. Error
8 error history
A341 – 348
Controller model
A349
9. Model
Model #1 to 15
A350 – 649
10. Advanced Function
Advanced #1 to #15
A650 – 874
11. Firmware version
A875

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
16
Parameter details and factory setting
Torque
32
Auto
Preset #
Parameter
Address
Factory Setting
Fastening
1
TC/AM_AC/TM
1
0
Torque
2
Auto
Torque min/max (%)
3
0
Target angle(degree)
4
0
Min angle(degree)
5
0
Max angle(degree)
6
0
Snug torque(%)
7
0
Speed (rpm)
8
Auto
Free fastening angle(degree)
9
0
Free fastening speed(rpm)
10
0
Soft start(1-300ms)
11
0
Seating point (%) 10-90
12
Auto
Torque rising rate(ms) 50-200
13
50
Ramp up speed(rpm) 20-80% of max
14
Auto
Torque compensation (%) 90-110
15
100
2
TC/AM_AC/TM
16
0
Torque
17
Auto
Torque min/max (%)
18
0
Target angle(degree)
19
0
Min angle(degree)
20
0
Max angle(degree)
21
0
Snug torque(%)
22
0
Speed (rpm)
23
Auto
Free fastening angle(degree)
24
0
Free fastening speed(rpm)
25
0
Soft start(1-300ms)
26
0
Seating point (%) 10-90
27
Auto
Torque rising rate(ms) 50-200
28
50
Ramp up speed(rpm) 20-80% of max
29
Auto
Torque compensation (%) 90-110
30
100
3
TC/AM_AC/TM
31
0

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
17
Torque min/max (%)
33
0
Target angle(degree)
34
0
Min angle(degree)
35
0
Max angle(degree)
36
0
Snug torque(%)
37
0
Speed (rpm)
38
Auto
Free fastening angle(degree)
39
0
Free fastening speed(rpm)
40
0
Soft start(1-300ms)
41
0
Seating point (%) 10-90
42
Auto
Torque rising rate(ms) 50-200
43
50
Ramp up speed(rpm) 20-80% of max
44
Auto
Torque compensation (%) 90-110
45
100
4
TC/AM_AC/TM
46
0
Torque
47
Auto
Torque min/max (%)
48
0
Target angle(degree)
49
0
Min angle(degree)
50
0
Max angle(degree)
51
0
Snug torque(%)
52
0
Speed (rpm)
53
Auto
Free fastening angle(degree)
54
0
Free fastening speed(rpm)
55
0
Soft start(1-300ms)
56
0
Seating point (%) 10-90
57
Auto
Torque rising rate(ms) 50-200
58
50
Ramp up speed(rpm) 20-80% of max
59
Auto
Torque compensation (%) 90-110
60
100
5
TC/AM_AC/TM
61
0
Torque
62
Auto
Torque min/max (%)
63
0
Target angle(degree)
64
0
Min angle(degree)
65
0
Max angle(degree)
66
0
Snug torque(%)
67
0
Speed (rpm)
68
Auto
Free fastening angle(degree)
69
0
Free fastening speed(rpm)
70
0
Soft start(1-300ms)
71
0
Seating point (%) 10-90
72
Auto
Torque rising rate(ms) 50-200
73
50
Ramp up speed(rpm) 20-80% of max
74
Auto

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
18
Torque compensation (%) 90-110
75
100
6
TC/AM_AC/TM
76
0
Torque
77
Auto
Torque min/max (%)
78
0
Target angle(degree)
79
0
Min angle(degree)
80
0
Max angle(degree)
81
0
Snug torque(%)
82
0
Speed (rpm)
83
Auto
Free fastening angle(degree)
84
0
Free fastening speed(rpm)
85
0
Soft start(1-300ms)
86
0
Seating point (%) 10-90
87
Auto
Torque rising rate(ms) 50-200
88
50
Ramp up speed(rpm) 20-80% of max
89
Auto
Torque compensation (%) 90-110
90
100
7
TC/AM_AC/TM
91
0
Torque
92
Auto
Torque min/max (%)
93
0
Target angle(degree)
94
0
Min angle(degree)
95
0
Max angle(degree)
96
0
Snug torque(%)
97
0
Speed (rpm)
98
Auto
Free fastening angle(degree)
99
0
Free fastening speed(rpm)
100
0
Soft start(1-300ms)
101
0
Seating point (%) 10-90
102
Auto
Torque rising rate(ms) 50-200
103
50
Ramp up speed(rpm) 20-80% of max
104
Auto
Torque compensation (%) 90-110
105
100
TC/AM_AC/TM
106
0
Torque
107
Auto
Torque min/max (%)
108
0

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
19
8
Target angle(degree)
109
0
Min angle(degree)
110
0
Max angle(degree)
111
0
Snug torque(%)
112
0
Speed (rpm)
113
Auto
Free fastening angle(degree)
114
0
Free fastening speed(rpm)
115
0
Soft start(1-300ms)
116
0
Seating point (%) 10-90
117
Auto
Torque rising rate(ms) 50-200
118
50
Ramp up speed(rpm) 20-80% of max
119
Auto
Torque compensation (%) 90-110
120
100
9
TC/AM_AC/TM
121
0
Torque
122
Auto
Torque min/max (%)
123
0
Target angle(degree)
124
0
Min angle(degree)
125
0
Max angle(degree)
126
0
Snug torque(%)
127
0
Speed (rpm)
128
Auto
Free fastening angle(degree)
129
0
Free fastening speed(rpm)
130
0
Soft start(1-300ms)
131
0
Seating point (%) 10-90
132
Auto
Torque rising rate(ms) 50-200
133
50
Ramp up speed(rpm) 20-80% of max
134
Auto
Torque compensation (%) 90-110
135
100
10
TC/AM_AC/TM
136
0
Torque
137
Auto
Torque min/max (%)
138
0
Target angle(degree)
139
0
Min angle(degree)
140
0
Max angle(degree)
141
0
Snug torque(%)
142
0
Speed (rpm)
143
Auto
Free fastening angle(degree)
144
0
Free fastening speed(rpm)
145
0

mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
20
Soft start(1-300ms)
146
0
Seating point (%) 10-90
147
Auto
Torque rising rate(ms) 50-200
148
50
Ramp up speed(rpm) 20-80% of max
149
Auto
Torque compensation (%) 90-110
150
100
11
TC/AM_AC/TM
151
0
Torque
152
Auto
Torque min/max (%)
153
0
Target angle(degree)
154
0
Min angle(degree)
155
0
Max angle(degree)
156
0
Snug torque(%)
157
0
Speed (rpm)
158
Auto
Free fastening angle(degree)
159
0
Free fastening speed(rpm)
160
0
Soft start(1-300ms)
161
0
Seating point (%) 10-90
162
Auto
Torque rising rate(ms) 50-200
163
50
Ramp up speed(rpm) 20-80% of max
164
Auto
Torque compensation (%) 90-110
165
100
12
TC/AM_AC/TM
166
0
Torque
167
Auto
Torque min/max (%)
168
0
Target angle(degree)
169
0
Min angle(degree)
170
0
Max angle(degree)
171
0
Snug torque(%)
172
0
Speed (rpm)
173
Auto
Free fastening angle(degree)
174
0
Free fastening speed(rpm)
175
0
Soft start(1-300ms)
176
0
Seating point (%) 10-90
177
Auto
Torque rising rate(ms) 50-200
178
50
Ramp up speed(rpm) 20-80% of max
179
Auto