movomech Mechspace Pro 70 User manual

2018-01-01
Mechspace
Pro 70
Original instructions EN

Although the greatest care was taken regarding the information in this document, we assume no responsibility for any errors. We reserve the right to make changes.
ILLUSTRATIONS – The illustrations in the document represent the described products, but the delivered goods may differ in some respects from the illustrations.
SPECIFICATIONS – The right is reserved to make changes in design and dimensions compared with the information in the catalogue in order not to prevent development of
designs, material and manufacturing methods.
The customer is reminded that there is supplementary information that is not included in the catalogue regarding the suitability of different product combinations within
Movomech’s comprehensive product line.
All relevant information must be provided to the persons who are responsible for the application of the product.
EC declaration of conformity of the machinery
TRANSLATION
(according to 2006/42/EC, annex 2A)
Manufacturer
Movomech AB
Tel: [phone]
Box 9083
Fax: [phone]
291 09 Kristianstad
E-mail: [email protected]
Sweden
Web: www.movomech.com
Representative for documentation
Joakim Stannow
Movomech AB
hereby declares that the machinery
Designation
Machine type
Version
Mechspace Pro
Lifting unit
70, 70P, 150, 150P
complies to all applicable regulations in
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
and that standards and/or technical specifications as described below are applied.
Machinery Directive
EMC Directive
Low Voltage Directive
SS-EN-ISO 12100:2010
Place: Kristianstad
Date: 2017-07-01
Joakim Stannow, CEO
Movomech AB

4
6
8
14
17
19
41
42
43
50
1 Safety instruction.........................................................................
2 Technical data .............................................................................
3 Base model.................................................................................
4 Accessories.................................................................................
5 Suspensions ...............................................................................
6 Pneumatic configurations ............................................................
7 Installation and commissioning ....................................................
8 User instructions .........................................................................
9 Service, maintenance & running ..................................................
10 Troubleshooting...........................................................................
Contents Page

4
Mechspace Pro 70 2016-08-01
Movomech AB’s equipment is manufactured in accordance with the latest technological advances, and according to the latest applicable european
standards and directions. The aim of this documentation is to provide the user with practical instructions for safe operation and simple maintenance
of the equipment.
Anyone who deals with the installation of the equipment (including related equipment), operational procedure, use, maintenance, and/or repair
functions must have read and understood:
• the instruction manual,
• the safety regulations, and
• the safety instructions for each individual section.
In order to avoid misuse and to ensure the reliable operation of the products, we recommend that the instruction manual is always available to
the user/operator.
Intended usage
The equipment is intended exclusively for transportation, lifting and
lowering of load. Any other use, including the towing of a load and
the transportation of passengers, is prohibited (see below for more
examples). Movomech AB does not accept responsibility for damage
caused by such use. All risks are the sole responsibility of the user.
The equipment may only be used in perfect technical condition
by trained staff, and in accordance with current safety and work
protection regulations. Furthermore, the user must observe
operational and maintenance conditions contained in the instruction
manual. Severe personal injury and damage to equipment can be
caused by:
• removal of covers and casings,
• non-professional installation of equipment,
• incorrect usage, or
• insufficient maintenance.
Prohibited usage
Certain types of activities and operations are prohibited, as in specific
circumstances they can cause personal injury as well as permanent
damage to the construction. For example:
• It is prohibited to convey passengers using the equipment.
• Never transport suspended loads above anyone’s head.
• Never drop a suspended load, and make sure it is lifted in a
straight line.
• Never loosen secured or fastened loads by using the
equipment.
• Do not overload.
• Do not leave a suspended load unattended.
General safety aspects
The instruction manual should always be kept within easy reach of
the equipment. It contains important safety information and sections
that relate to guidelines, norms, and regulations. Failure to follow the
safety regulations in this instruction manual may result in personal injury
or death.
In addition to the instruction manual, generally applicable regulations
and rules must be followed and adhered to in order to avoid
accidents and protect the environment. This also applies to
regulations relating to the handling of products dangerous to the
environment and the use of personal safety equipment.
As regards all work associated directly or indirectly with the
equipment, the user must follow and adhere to all the above
regulations as well as current work protection and safety regulations.
In spite of this, a life-threatening risk still prevails in cases where the
equipment is used and operated by non-trained or non-instructed
staff in a non-professional or non-intended way.
The user should supplement the instruction manual with instructions
that consider the nature of the operation, e.g. company organisation,
work procedures, and number of staff.
The members of staff who are assigned to work with the equipment
must have read the instruction manual prior to undertaking any work,
and he/she should pay particular attention to the chapters containing
safety instructions. It is too late once work has commenced. This
applies in particular to members of staff who are working with the
equipment on a temporary basis, e.g. for maintenance purposes.
When convenient, the staff should be tested on their knowledge of the
manual’s contents that relate to safety and accident awareness.
The user is responsible for ensuring that the equipment is used only
when it is in perfect condition and that all applicable and relevant
safety regulations and requirements are followed.
The equipment should be taken out of operation immediately if
functional damage or defects are discovered.
Personal safety equipment should be used as and when necessary, or
when required by regulations.
Safety and warning devices, such as signs, stickers and labels must
not be removed or made illegible.
All safety and warning devices on or adjacent to the equipment
should be complete and maintained in a legible/functional condition.
All changes, extensions or reconstruction that may affect safety are
forbidden without written permission from Movomech AB. This also
applies to assembly and adjustment of safety equipment and welding
of structural parts.
Spare parts must comply with Movomech AB’s stated technical
requirements. This compliance is guaranteed when original spare
parts are used. The intervals prescribed or stated in the instruction
manual for regular testing/inspection must be adhered to!
Staff selection and qualifications
Reliable staff must carry out work with/on the equipment. Regulations
that apply to under-age persons must be followed.
The user is responsible for supplying necessary training and
instructions to those that he/she employs, including professionals
and/or apprentices.
It is recommended that the user draws up instructions and guidelines
relating to the causes of errors, communicates these to the relevant
staff, and posts directions on appropriate and clearly visible places.
It is recommended that the user makes sure that the knowledge
of the staff is adequate as regards the following points, prior to the
operation of the construction:
• knowledge of the contents of the instruction manual,
• knowledge of the safety and user regulations contained
therein,
• and knowledge of applicable work protection regulations.
Only trained and instructed staff should be permitted to work with the
equipment. Parameters relating to use, maintenance, and installation
1 Safety instruction

5
Mechspace Pro 70 2016-08-01
should be clarified.
Safety instructions for usage
The only persons allowed to work on the electrical equipment are
competent staff members who work in accordance with regulations
and standards for high-voltage equipment.
No persons under the influence of drugs, alcohol or medication which
affects their ability to react, are allowed to use, maintain, or repair the
construction.
All stated actions and instructions relating to work protection and
issues relating to general safety and protection of workers that should
be carried out or studied prior to, during or following operation must
be followed to the letter. Failure to do so may result in fatal accidents.
The equipment should be stopped or taken out of operation at the
time of detection of faults relating to work protection and operational
accessibility.
Safety equipment must not be deactivated, altered or used in a way
that conflicts with applicable regulations.
Appropriate actions must be taken to ensure safe operation and
functional conditions for the user.
The equipment should only be used when all protective and safety
equipment, such as detachable guards and emergency stop devices,
are in place and in working order.
Any type of modification and alteration of the equipment is prohibited.
However, this does not apply to lesser changes that do not affect the
strength, operational safety or work protection, or to actions which
promote an increased level of safety.
The fundamental responsibility for these changes lies with the user.
If in doubt, contact Movomech AB for written approval of the actions
prior to implementation.
The equipment should be stopped and locked immediately when
functional faults occur. Faults should be corrected immediately!
Following an ”emergency stop” the user has to wait for the cause of
the disruption to be repaired and for an assurance that there is no
further danger before he/she reconnects the equipment and resumes
operation.
The equipment should be disconnected immediately in the following
cases:
• when electrical equipment, cables and/or insulation
material is damaged, or
• when work protection equipment is damaged.
Specific local circumstances or applications may lead to situations
that were unknown at the time of writing this document. In such
cases, the user must ensure safe operation and disconnect the
equipment until measures to maintain safe operation have been
carried out in conjunction with Movomech AB or other authorised
party.
Ensure that no one can become injured when they use the equipment
prior to connecting/activating the equipment.
If the user notices the presence of persons who may become injured
during operation, the operation should be discontinued immediately
and must not be resumed until these persons have left the dangerous
area.
The user must make sure that the equipment is in a perfect
and operationally safe condition prior to all operations using the
equipment.
The user should carry out all prescribed safety measures and make
sure that automated procedures are completed when the equipment
is disconnected (e.g. when there are deficiencies as regards
operational and personal safety, an emergency situation exists, repair
or maintenance is being carried out, damage is noticed or at the
completion of work).
Work with the equipment is only allowed when the operator has been
instructed to do so by his superior, and if the operator has knowledge
of the equipment and its function.
Safety instruction
Warning
Suspended load
Do not walk
under suspended
load

6
Mechspace Pro 70 2016-08-01
4 50
5 60
5,5 65
6 70
7 70
2 Technical data
Load capacity Maximum moment Hoisting speed Rotation Maximum tare weight Maximum stroke
50-70 kg * 500 Nm 0-40 m/min 0-330° (upper)
0-330° (lower)
100 kg 900 mm
Medium Working pressure Air consumption Working temperature Noice level
Air
Non-lubricated
4-7 bar 8 ln/stroke ** 5-40 °C < 70 dB (A)
Note: The lifting unit is prepared for an incoming air pressure of 5 bar unless stated otherwise in the specification.
Working pressure Load capacity
[bar] [kg]
* See table below.
** With maximum load.

7
Mechspace Pro 70 2016-08-01
Ne pas
dépasser!
1,21-1,3 [m]
D [m]
Load diagram
Load [kg]
Distance D [m]
Not recommended due to unpredictable
dynamic loads.
Contact Movomech for advice.
Must not be
exceeded!
Mechspace Pro 70/70P can operate with loads within the shaded
diagram area.
Max torque at tool adapter is 500 Nm. Max load at the tool
adapter is a total of 70 kg (includes tool arm, gripper tool,
handled object, etc).
Load [kg]
Technical data

8
Mechspace Pro 70 2016-08-01
738947
Mechspace Pro 70
A-A
C-C
D-D
E-E
B-B
G
A
A
C
C
D
D
E
E
1
Cross unit cpl., Mechspace Pro 70
7389481
1Arm 1200, unpainted7389492
1Tool adapter, Mechspace Pro 707389503
1
Bracket for pneumatics
738951
4
1Pull rod 1200738953
5
1
Stroke limiter, Mechspace Pro 70
7389546
1Pneumatic cylinder, Mechspace Pro 70738955
7
1
Swivel unit, Mechspace Pro 70
7409078
4
M6S M10x25 Hex head screw, full thread
7313259
1
M6S M10x45 Hex head screw, full thread
73134310
3
MC6S M8x20 Hex socket head cap screw
73140211
2
10,5x28x6 washer thick SS1466
73141412
2
Straight connector 3/8" D=12
73156313
4
MC6S M8x12 Hex socket head cap screw
73186114
1
M6S M10x40 Hex head screw, full thread
73334115
2
M6S M8x20 Hex head screw, full thread
73551616
1
Bracket for rod end
73836317
1
Hardened Precision Shaft Ø20 L=88
73836418
2
Sleeve 40/30x59
73836719
1
Cylinder bracket, unpainted
73895620
2Bearing plate73895821
1
Bracket for pull rod
73895922
1
Shaft, L=150
73896023
2
Ball bearing 6206 2RS-ISB
73896124
2
Needle bearing K 16x20x13-NBS
73896225
2
Clamping element CN25C 20x30
73906726
1
Hardened Precision Shaft Ø20 L=140
74141427
2
Sliding washer BK1 20 SF
73907128
2
Nylon bushing with flange D20/25x25-30x3
73909729
1Washer 25x6x1.573909830
2Decal 512x85 Movomech pro. series cut73959931
3
Sleeve 20/9x8
74016832
1
FRL unit (B) with micro filter
74042733
1
Bracket cabinet Mechlift / Powerdrive
74043034
1
Shaft L=180
74089735
1
Shaft nut KM 6 (M30x1,5)
74089836
1Locking nut MB 674089937
1
Connector PUSH-LOK BSP 1/2-1/2" 90gr
74180138
2
Sga20 Retaining ring for shaft
73164939
2
20x32x1,0 Shim washer
73359940
2BRB 13x24x2 washer73024441
5
MC6S M6x12 Hex socket head cap screw
73024942
4
BRB 6,4x12x1,5 washer73026843
8BRB 8,4x16x1,5 washer730308
44
14BRB 10,5x22x2 washer730549
45
6
M6S M10x30 Hex head screw, full thread
73090346
2Hose clamp BFH-17-0730962
47
2
M6S M8x25 Hex head screw, full thread
73131948
AntalBenämningArt.nrPosit
B
B
G
Mechspace Pro 70, mech.
738947
2
7
6
45
42 43
37
19 36
35
18
17
29
48
10
47
25
21
31
20
7
16
44
24
1
22
44
41
9
39
27
39
40
432
26
28
34
12
30
11
4
5
3
8
23
46 45
14
44
15
45
45
42 43
33 13 38
34
3 Base model
Note:
A number of fasteners and smaller
components are not specified in this
documentation.
For further information, contact
Movomech AB.

9
Mechspace Pro 70 2016-08-01
Mechspace Pro 70
738947
A-A
C-C
D-D
E-E
B-B
G
A
A
C
C
D
D
E
E
1
Cross unit cpl., Mechspace Pro 70
7389481
1Arm 1200, unpainted7389492
1Tool adapter, Mechspace Pro 707389503
1
Bracket for pneumatics
738951
4
1Pull rod 1200738953
5
1
Stroke limiter, Mechspace Pro 70
7389546
1Pneumatic cylinder, Mechspace Pro 70738955
7
1
Swivel unit, Mechspace Pro 70
7409078
4
M6S M10x25 Hex head screw, full thread
7313259
1
M6S M10x45 Hex head screw, full thread
73134310
3
MC6S M8x20 Hex socket head cap screw
73140211
2
10,5x28x6 washer thick SS1466
73141412
2
Straight connector 3/8" D=12
73156313
4
MC6S M8x12 Hex socket head cap screw
73186114
1
M6S M10x40 Hex head screw, full thread
73334115
2
M6S M8x20 Hex head screw, full thread
73551616
1
Bracket for rod end
73836317
1
Hardened Precision Shaft Ø20 L=88
73836418
2
Sleeve 40/30x59
73836719
1
Cylinder bracket, unpainted
73895620
2Bearing plate73895821
1
Bracket for pull rod
73895922
1
Shaft, L=150
73896023
2
Ball bearing 6206 2RS-ISB
73896124
2
Needle bearing K 16x20x13-NBS
73896225
2
Clamping element CN25C 20x30
73906726
1
Hardened Precision Shaft Ø20 L=140
74141427
2
Sliding washer BK1 20 SF
73907128
2
Nylon bushing with flange D20/25x25-30x3
73909729
1Washer 25x6x1.573909830
2Decal 512x85 Movomech pro. series cut73959931
3
Sleeve 20/9x8
74016832
1
FRL unit (B) with micro filter
74042733
1
Bracket cabinet Mechlift / Powerdrive
74043034
1
Shaft L=180
74089735
1
Shaft nut KM 6 (M30x1,5)
74089836
1Locking nut MB 674089937
1
Connector PUSH-LOK BSP 1/2-1/2" 90gr
74180138
2
Sga20 Retaining ring for shaft
73164939
2
20x32x1,0 Shim washer
73359940
2BRB 13x24x2 washer73024441
5
MC6S M6x12 Hex socket head cap screw
73024942
4
BRB 6,4x12x1,5 washer73026843
8BRB 8,4x16x1,5 washer730308
44
14BRB 10,5x22x2 washer730549
45
6
M6S M10x30 Hex head screw, full thread
73090346
2Hose clamp BFH-17-0730962
47
2
M6S M8x25 Hex head screw, full thread
73131948
AntalBenämningArt.nrPosit
B
B
G
Mechspace Pro 70, mech.
738947
2
7
6
45
42 43
37
19 36
35
18
17
29
48
10
47
25
21
31
20
7
16
44
24
1
22
44
41
9
39
27
39
40
432
26
28
34
12
30
11
4
5
3
8
23
46 45
14
44
15
45
45
42 43
33 13 38
34
Position Qty. Designation Ref. Position Qty. Designation Ref.
Base model
1 1 Cross unit, complete 738948 31 2 Decal 739599
2 1 Arm, L=1200 738949 32 3 Sleeve 740168
3 1 Tool adapter 738950 33 1 FRL unit 740427
4 1 Bracket for pneumatics 738951 34 1 Bracket for pneumatic cabinet 740430
5 1 Pull rod, L=1200 738953 35 1 Shaft 740897
6 1 Stroke limiter 738954 36 1 Shaft nut 740898
7 1 Pneumatic cylinder, complete 738955 37 1 Locking nut 740899
8 1 Swivel unit 740907 38 1 Elbow connector 741801
9 4 Screw M6S M10x25 731325 39 2 Retaining ring 731649
10 1 Screw M6S M10x45 731343 40 2 Shims 20x32x1,0 733599
11 3 Screw MC6S M8x20 731402 41 2 Washer 13x24x2 730244
12 2 Washer 10,5x28x6 731414 42 5 Screw MC6S M6x12 730249
13 2 Straight connector 731563 43 4 Washer 6,4x12x1,5 730268
14 4 Screw MC6S M8x12 731861 44 8 Washer 8,4x16x1,5 730308
15 1 Screw M6S M10x40 733341 45 14 Washer 10,5x22x2 730549
16 2 Screw M6S M8x20 735516 46 6 Screw M6S M10x30 730903
17 1 Bracket for rod end 738363 47 2 Hose clamp 730962
18 1 Shaft 738364 48 2 Screw M6S M8x25 731319
19 2 Sleeve 738367 49
20 1 Cylinder bracket 738956 50
21 2 Bearing plate 738958 51
22 1 Bracket for pull rod 738959 52
23 1 Shaft 738960 53
24 2 Ball bearing 738961 54
25 2 Needle bearing 738962 55
26 2 Clamping element 739067 56
27 1 Shaft 741414 57
28 2 Sliding washer 739071 58
29 2 Bushing with flange 739097 59
30 1 Washer 25x6x1,5 739098 60

10
Mechspace Pro 70 2016-08-01
738948
A-A
B-B ( 1:15 )
B
A
A
B
B
B
1
Cross unit c/c 800 mech.
7389661
1
Housing
7389652
1
Spacer ring 108x100,8x72
7389673
1
Spacer ring 112x100,5x6
738968
4
1Bracket rear brake, Mechspace Pro 70743000
5
1
Rubber damper 50/30x36 PUR 90
7389756
1
Brake disc 6-flanged
738972
7
2
Ball bearing 6020-2RS-ISB
7389648
1
Bracket
7389779
2
Rotation limiter (2 parts)
73897810
1
Shaft nut KM 20
73897011
1Locking washer MB 2073896912
10BRB 13x24x2 washer73024413
6BRB 6,4x12x1,5 washer73026814
1
Spacer washer 130x108x2
73897315
4
MC6S M12x130 Hex socket head cap screw
73064416
1
SgA30 Retaining ring for shaft
73289717
4
MC6S M8x70 Hex socket head cap screw
73299518
6
M6S M6x12 Hex head screw, full thread
73466519
3
M6S M12x25 Hex head screw, full thread
73134720
1
M6S M12x50 Hex head screw, half thread
73563221
4M12 Hexagon nut with torque part73024322
AntalBenämningArt.nrPosit
Cross unit cpl., Mechspace Pro 70
738948
7
9
5
1
5
10
4
8
8
3
2
6
1
1
12
11
Cross unit, complete
Base model
Position Qty. Designation Ref. Position Qty. Designation Ref.
1 1 Cross unit 738966 7 1 Brake disc 738972
2 1 Housing 738965 8 2 Ball bearing 738964
3 1 Spacer ring 738967 9 1 Bracket 738977
4 1 Spacer ring 738968 10 2 Rotation limiter 738978
5 1 Bracket 743000 11 1 Shaft nut 738970
6 1 Rubber damper 738975 12 1 Locking washer 738969

11
Mechspace Pro 70 2016-08-01
738955
1
Pneumatic cylinder C96YDB125-160
7395681
1
Breathing filter 1/2" sinter type
7316213
1
Cylinder bracket 0053/125
738359
5
1Rod end KJ27D7383616
1
Piloted non-return valve 1/2"
7398162
1
Sleeve 30/26x36
738365
55
2
Needle bearing HK2018-2RS
739069
7
1
Rotary male elbow 1/8" D=4
73087330
1
Washer
741053
4
3
Adapter BSP 1/2-1/2" UTV
74174610
1
Bend Typ 90B 1/2 IR x1/2 IR
74174711
1
Hydraulic conection 1/2" straight
7417488
AntalBenämningArt.nrPosit
Pneumatic cylinder, Mechspace Pro 70
738955
1
5
4
6
7
3
2
8
Base model
Pneumatic cylinder, complete
1 1 Pneumatic cylinder 739568 5 1 Cylinder bracket 738359
2 1 Non-return valve 739816 6 1 Rod end 738361
3 1 Filter 731621 7 1 Needle bearing 739069
4 1 Washer 738362 8 1 Pneumatic connector 741748
Position Qty. Designation Ref. Position Qty. Designation Ref.

12
Mechspace Pro 70 2016-08-01
738950
A-A
1
Rubber damper 30/16x28 PUR 90
7390592
1
Sleeve 70/55.2x5
7390603
1
Main shaft tool adapter
739061
4
1
Sleeve 60/55.5x86
739062
5
1
Housing, tool adapter
7390646
1
Shaft nut KM 11
739065
7
1Locking nut MB 117390668
2
Rotation limiter (2 parts)
7390739
4
MC6S M6x20 Hex socket head cap screw
73028010
2
Deep groove ball bearing 61911-2RS-ISB
73490511
1
Shaft rotation damper 20 mm
7409001
1
MSK6SS M8x8 Stop screw.
73042012
2
MP6SS M6x12 Stop screw with flat tip
73907215
2
Needle bearing K 16x20x13-NBS
73896216
1
Hardened Precision Shaft Ø16 L=86
73906314
2
Needle bearing HK2018-2RS
73906913
AntalBenämningArt.nrPosit
A
A
Tool adapter, Mechspace Pro 70
738950
30°
66

8 0

5 0
7
8
5
6
11
3
4
12
6
14
1
2
9
10
16
15
M8x1.25 (12x)
Base model
Tool adapter
Position Qty. Designation Ref. Position Qty. Designation Ref.
1 1 Shaft for damper 740900 9 2 Rotation limiter 739073
2 1 Rubber damper 739059 10 4 Screw 730280
3 1 Sleeve 739060 11 2 Ball bearing 734905
4 1 Shaft 739061 12 1 Stop screw 730420
5 1 Sleeve 739062 13 2 Needle bearing 739069
6 1 Housing 739064 14 1 Shaft 739063
7 1 Shaft nut 739065 15 2 Stop screw 739072
8 1 Locking washer 739066 16 2 Needle bearing 738962
Note:
738950 is interface for gripper.

13
Mechspace Pro 70 2016-08-01
738954
738953
1
Nut ML6M M20x1.5 fzb left threaded
7390892
1
Tube for pull rod, Mechspace Pro 70
7390903
1
Nut ML6M M20x1.5 fzb
7390911
1
Rod end SAJLK 20 C-LS, left threaded
739092
5
1
Rod end SAJK20 ES
739088
4
AntalBenämningArt.nrPosit
Pull rod 1200
738953
45
32
1
1Rod L=4707390931
2Adjustable stop, stroke limiter7329702
1
Joint crown, RF 12 SE
7326053
1
Bracket for stroke limiter
739096
4
2
Rubber damper 25/12x40 PUR 90
739094
5
2
Polyamid bushing D=12/16x10
7390996
4
MC6S M6x16 Hex socket head cap screw
730266
7
1
M12 Hexagon nut thin ISO 4035
7302228
1M12 Hexagon nut with torque part7302439
AntalBenämningArt.nrPosit
Stroke limiter, Mechspace Pro 70
738954
4
6
1
7
5
2
3
8
9
Base model
Stroke limiter
Position Qty. Designation Ref. Position Qty. Designation Ref.
1 1 Rod, L=470 739093 6 2 Bushing 739099
2 2 Adjustable stop 732970 7 4 Screw 730266
3 1 Rod end 732605 8 1 Nut 730222
4 1 Bracket 739096 9 1 Locking nut 730243
5 2 Rubber damper 739094
Pull rod, L=1200
1 1 Nut, RH threaded 739091 4 1 Rod end, RH threaded 739088
2 1 Nut, LH threaded 739089 5 1 Rod end, LH threaded 739092
3 1 Round bar 739090
Position Qty. Designation Ref. Position Qty. Designation Ref.

14
Mechspace Pro 70 2016-08-01
741300
741307
1
Outer bracket
7413031
1Brake disk 1507390802
1
Perforated sleeve 50/30x30
7390813
6
MC6S M6x45 Hex socket head cap screw
730272
4
1
Brake caliper Ø40
741307
5
2
MC6S M6x70 Hex socket head cap screw
7355016
2
Collar nut M6MF M6 Nyloc fzb
741070
7
AntalBenämningArt.nrPosit
Front brake, Mechspace 70/70P
741300
5
4
6
7
2
3
A-A
A
A
2
Brake caliper half
7413041
1
Push-in L-fitting QSML-M5-4
732373
4
2
X-ring Ø40,87x3,53
7413622
1
Push-in T-fitting QSMT-M5-4
7413616
2Piston d=40 incl. brake pad7405743
AntalBenämningArt.nrPosit
Brake caliper Ø40
741307
1
2
3
4 Accessories
Front brake
Position Qty. Designation Ref. Position Qty. Designation Ref.
Position Qty. Designation Ref. Position Qty. Designation Ref.
1 1 Outer bracket 741303 5 1 Brake caliper 741307
2 1 Brake disc 739080 6 2 Screw 735501
3 1 Socket 739081 7 2 Nut 741070
4 6 Screw 731408
Brake caliper
1 2 Brake caliper half 741304 3 2 Piston with brake pad 740574
2 2 X ring 741362

15
Mechspace Pro 70 2016-08-01
739590
1Upper plate7395911
4
MC6S M8x100 Hex socket head cap screw, 12.9
7354153
2Tube bracket, 2 parts7398032
4
M8 Hexagon nut with torque part730117
4
AntalBenämningArt.nrPosit
Clamp bracket for tube, MS Pro 70/70P
739590
1
3
30°
8,5 (9x)
2
4
∅50
743155
2
RBremssattel,
Unterbaugruppe
Étrier de frein,
sous-ensemble
Brake caliper,
sub-assy
Bromsok,
del-smst
Brake caliper-sub assembly
7427091
2
Schraube MC6S
M8x25
Vis MC6S M8x25Screw MC6S
M8x25
Skruv MC6S
M8x25
MC6S M8x25 Hex socket head cap screw
7307272
2
Schraube MC6S
M6x60
Vis MC6S M6x60Screw MC6S
M6x60
Skruv MC6S
M6x60
MC6S M6x60 Hex socket head cap screw
7321293
1
L-Steckverschrau
bung M5-4
Raccord coudé
M5-4
Push-in L-fitting
M5-4
Vinkelkoppling,
instick M5-4
Push-in L-fitting QSML-M5-4
732373
4
1
T-Steckverschrau
bung M5-4
Raccord
enfichable en T
M5-4
Push-in T fitting
M5-4
T-koppling,
instick M5-4
Push-in T-fitting QSMT-M5-4
741361
5
2
Sicherungsmutter
M6
Écrou de
blocage M6
Locking nut M6
Låsmutter M6
M6 Hexagon nut with torque part7302736
Antal
R/S
BenämningDokTysBenämningDokFraBenämningDokEng
BenämningDokSve
BenämningArt.nrPosition
Brake caliper Ø40-3
743155
3
6
4
5
2
1
Accessories
Clamp bracket for tube
Position Qty. Designation Ref. Position Qty. Designation Ref.
Upper brake
1 1 Upper plate 739591 3 4 Upper plate 735415
2 2 Tube bracket, 2 parts 739803 4 4 Tube bracket, 2 parts 730117
743155 Brake unit
# Article nr. Designation Quantity
1 742709 Brake caliper, sub-assy R 2
2 730727 Screw MC6S M8x25 2
3 732129 Screw MC6S M6x60 2
4 732373 Push-in L-fitting M5-4 1
5 741361 Push-in T fitting M5-4 1
6 730273 Locking nut M6 2

16
Mechspace Pro 70 2016-08-01
739804
Weld-on bracket for tube, MS Pro 70/70P
739804
8,5 (12x)
85
30°
66
50
1
∅50
Accessories
* Without surface treatment
Weld-on bracket for tube
Position Qty. Designation Ref. Position Qty. Designation Ref.
1 1 Weld-on bracket for tube 739804*

17
Mechspace Pro 70 2016-08-01
739564
739567
∅16 H7
PH: 66 mm
55-220 mm
Max.11 mm
Fb:
Ft:
PH: 73± mm
50
0
5 Suspensions
Eye bolt suspension (4x)
Fixed suspension (4x)
1 4 Eye bolt suspension (1x) 739811
Position Qty. Designation Ref.
1 4 Fixed suspension 739565
Position Qty. Designation Ref.
Note:
For optimal stability, trolleys with
minimized play is recommended in the rail
system.

18
Mechspace Pro 70 2016-08-01

19
Mechspace Pro 70 2016-08-01
20
22
24
26
28
30
32
34
36
38
2 weight ................................................................................................
2 weight automotive .............................................................................
2 weight with slow speed function .........................................................
2 weight automotive with slow speed function.......................................
3 weight ...............................................................................................
3 weight automotive .............................................................................
3 weight with slow speed function .........................................................
3 weight automotive with slow speed function.......................................
Pilot control .........................................................................................
Pilot control with slow speed function....................................................
Configuration Page
6 Pneumatic configurations

20
Mechspace Pro 70 2016-08-01
741330
1
Pneumatikschr
ank
Coffret
pneumatique
Pneumatic
cabinet
Pneumatikskå
p
Pneumatic cabinet 70-100 kg7413241
1
2-Gewicht,
vormontiert
2-poids,
prémonté
2-weight,
pre-mounted
2-vikt,
förmonterad
Pneu.cabinet, 2-w 70/100 kg, pre-mounted
7413402
Antal
R/S
BenämningDoBenämningDokBenämningDoBenämningDoBenämningArt.nrPosit
Pneumatic 2-w, Pro 70/100 kg
741330
1
2
1
MontageplattePlaque de
montage
Mounting plate
Montageplåt
Mounting plate for pneu. cabinet 70-100
7413111
1
Befestigung
Équerre
BracketFäste
Bracket for regulator IR3120
7413462
1RPräzisionsregl
er
Régulateur de
précision
Precision
regulator
Precisionsregu
lator
Regulator IR3120-F047370673
1
R
3/2-Ventil
monostabil
Distributeur
3/2
monostable
3/2 valve
monostable
3/2-ventil
monostabil
3/2 valve monostabile 1/8" VTA301-01-F
738125
4
1
Befestigung
Équerre
BracketFäste
Mounting plate for VTA 301
741310
5
2
Schraube
MF6S M5x12
Vis MF6S
M5x12
Screw MF6S
M5x12
Skruv MF6S
M5x12
MF6S M5x12 Hex socket countersunk screw
7308206
2
Schraube
MC6S M4x10
Vis MC6S
M4x10
Screw MC6S
M4x10
Skruv MC6S
M4x10
MC6S M4x10 Hex socket head cap screw
730528
7
1
Befestigung
Équerre
BracketFäste
Plate for regulators, Mechline 50
7397768
1
RDruckwächterPressostatPressure
guard
Tryckvakt
Pressure guard LC-3-1/8 + UV
7395539
2
Schraube
MC6S M3x10
Vis MC6S
M3x10
Screw MC6S
M3x10
Skruv MC6S
M3x10
MC6S M3x10 Hex socket head cap screw
73367910
2
RPräzisionsregl
er
Régulateur de
précision
Precision
regulator
Precisionsregu
lator
Regulator IR 1020-F0173812411
1
Steckverteilerl
eiste
Barrette
terminale
enfichable
Manifold fitting
Fördelarstycke
Manifold fitting KM11-08-12-6
73959212
1
RRückschlagve
ntil
Clapet
anti-retour
Non-return
valve
Blockeringsve
ntil
Non-return valve AKH12A-04S
73959713
1
Schott-Steckve
rbindung 12-12
Traversée de
cloison 12-12
Push-in
connector
12-12
Skottgenomgå
ng 12-12
Bulkhead connector74079814
1
L-Steckverschr
aubung,
weiblich Ø12
Raccord
coudéfemelle
Ø12
L-fitting
female Ø12
Vinkelkoppling,
hona Ø12
Universal female elbow Ø12
74079915
1
L-Steckverschr
aubung Ø12
Raccord
coudéØ12
Push-in
L-fitting Ø12
Vinkelkopping,
instick Ø12
Push-in L fitting Ø12
74134816
1
Schott-Steckve
rbindung 8-8
Traversée de
cloison 8-8
Push-in
connector 8-8
Skottgenomgå
ng 8-8
Push-in bulkhead connector QSS 8-8
73927217
5
Schott-Steckve
rbindung 4-4
Traversée de
cloison 4-4
Push-in
connector 4-4
Skottgenomgå
ng 4-4
Push-in bulkhead connector QSS 4-4
73927018
11
L-Steckverschr
aubung
G1/8"-4
Raccord
coudéG1/8"-4
Push-in
L-fitting
G1/8"-4
Vinkelkoppling,
instick G1/8"-4
Push-in L-fitting QSML-G1/8-4
73951319
1
L-Steckverschr
aubung M5-4
Raccord
coudéM5-4
Push-in
L-fitting M5-4
Vinkelkoppling,
instick M5-4
Push-in L-fitting QSML-M5-4
73237320
1
Gerade
Steckverbindu
ng Ø12
Raccord droit
Ø12
Straight
push-in fitting
Ø12
Rak koppling,
instick Ø12
Straight push-in fitting
74134921
2
Schraube
MC6S M6x10
Vis MC6S
M6x10
Screw MC6S
M6x10
Skruv MC6S
M6x10
MC6S M6x10 Hex socket head cap screw
73133122
2
Schraube
MC6S M4x25
Vis MC6S
M4x25
Screw MC6S
M4x25
Skruv MC6S
M4x25
MC6S M4x25 Hex socket head cap screw
73559523
3
Blindstopfen
Ø8
Bouchon Ø8
Blanking plug
Ø8
Plugg, instick
Ø8
Blanking plugg Ø8
74135024
3
L-Steckverschr
aubung Ø8-4
Raccord
coudéØ8-4
Push-in
L-fitting Ø8-4
Vinkelkoppling,
instick Ø8-4
Push-in L fitting
74135125
1
L-Steckverschr
aubung Ø8-8
Raccord
coudéØ8-8
Push-in
L-fitting Ø8-8
Vinkelkoppling,
instick Ø8-8
Push-in L fitting
74135226
1
Gerade
Steckverbindu
ng Ø12-8
Raccord droit
Ø12-8
Straight
push-in fitting
Ø12-8
Rak koppling,
instick Ø12-8
Straight Push-in fitting
74135327
1
T-Steckverschr
aubung Ø4
Raccord en T
Ø4
Push-in
T-fitting Ø4
T-koppling,
instick Ø4
Push-in T-fitting QSMT-4
74135528
1
SLuftfilter
Filtre àair
Air filterLuftfilterAir filter for pneu. cabinet 70/100 kg
74139029
1
Gerade
Steckverbindu
ng G3/8"-12
Raccord droit
G3/8"-12
Straight
push-in fitting
G3/8"-12
Rak koppling
G3/8"-12
Straight connector 3/8" INV D=12
74180030
1
Adapter
1/2"-3/8"
Adapteur
1/2"-3/8"
Adapter
1/2"-3/8"
Adapter
1/2"-3/8"
Adapter BSP 1/2-3/8" UTV
74174931
1
Anzeigeplatte
2-Gewicht
Panneau
2-poids
Sign plate
2-weight
Skyltplåt 2-vikt
Sign for pneu. cabinet 2-weight
74132632
Antal
R/S
BenämningDoBenämningDokBenämningDoBenämningDoBenämningArt.nrPosit
Pneu.cabinet, 2-w 70/100 kg, pre-mounted
741340
1
3
21
16
20
19 23
9
18
31
30
14
17
15
27
25
4
6
10
11A 11B
28
12
26 24
2 22
7
5
29
13
32
8
741330
741340
Circuit diagram - 2-weight
Pneumatic configurations
741330 2-weight
# Article nr. Designation Quantity
1 741324 Pneumatic cabinet 1
2 741340 2-weight, pre-mounted 1
741340 2-weight, pre-mounted
# Article nr. Designation Quantity
1 741311 Mounting plate 1
2 741346 Bracket 1
3 737067 Precision regulator R 1
4 738125 3/2 valve monostable R 1
5 741310 Bracket 1
6 730820 Screw MF6S M5x12 2
7 730528 Screw MC6S M4x10 2
8 739776 Bracket 1
9 739553 Pressure guard R 1
10 733679 Screw MC6S M3x10 2
11 738124 Precision regulator R 2
12 739592 Manifold fitting 1
13 739597 Non-return valve R 1
14 740798 Push-in connector 12-12 1
15 740799 L-fitting female Ø12 1
16 741348 Push-in L-fitting Ø12 1
17 739272 Push-in connector 8-8 1
18 739270 Push-in connector 4-4 5
19 739513 Push-in L-fitting G1/8”-4 11
20 732373 Push-in L-fitting M5-4 1
21 741349 Straight push-in fitting Ø12 1
22 731331 Screw MC6S M6x10 2
23 735595 Screw MC6S M4x25 2
24 741350 Blanking plug Ø8 3
25 741351 Push-in L-fitting Ø8-4 3
26 741352 Push-in L-fitting Ø8-8 1
27 741353 Straight push-in fitting Ø12-8 1
28 741355 Push-in T-fitting Ø4 1
29 741390 Air filter S 1
30 741800 Straight push-in fitting G3/8”-12 1
31 741749 Adapter 1/2”-3/8” 1
32 741326 Sign plate 2-weight 1