Moxa Technologies V3200 Series User manual

P/N: 1802030000001
*1802030000001*
V3200 Series
Quick Installation Guide
Embedded Computers
Version 1.0, March 2023
Technical Support Contact Information
www.moxa.com/support

2023 Moxa Inc. All rights reserved.

- 2 -
Overview
The V3200 Series embedded computers are built around an Intel®
Core™ i7/i5/i3 or Intel® Celeron® high-performance processor and
come with up to 64 GB RAM, one M.2 2280 M key slot, and two
HDD/SSD for storage expansion. The computers are compliant with EN
50155:2017 and EN 50121-4 standards covering operating
temperature, power input voltage, surge, ESD, and vibration, making
them suitable for railway onboard and wayside applications.
For connecting with onboard and wayside systems and devices, the
V3200 computers are equipped with a rich set of interfaces including 4
Gigabit Ethernet ports (default; can go up to 8 ports) with one-pair LAN
bypass function to ensure uninterrupted data transmission, 2 RS-
232/422/485 serial ports, 2 DIs, 2 DOs, and 2 USB 3.0 ports. The built-
in TPM 2.0 module ensures platform integrity and provides hardware-
based security as well as protection from tampering.
Vehicular applications require reliable connectivity. They also require
clear indicators on the device that identify the status of the software.
The V3200 computers come with two 5G/one LTE and 6 SIM-card slots
to help establish redundant LTE/Wi-Fi connections and 3 programmable
LEDs that enable monitoring of the runtime status of software.
Package Checklist
Each basic system model package is shipped with following items:
•V3200 Series embedded computer
•Wall-mounting kit
•2 HDD trays
•16 screws for securing the HDD trays
•HDMI cable locker
•Quick installation guide (printed)
•Warranty card
NOTE
Notify your sales representative if any of the above items are
missing or damaged.
Panel Views
Front View
V3200-TL-4L Models

- 3 -
V3200-TL-8L Models
Rear View
Dimensions
V3200-TL-4L Models

- 4 -
V3200-TL-8L Models
LED Indicators
The following table describes the LED indicators located on the front
and rear panels of the V3200 computer.
LED Name Status Function
Power
(Power button)
Green Power is ON
OFF No power input/other power-input error
Ethernet
(100 Mbps)
(1000 Mbps)
Green Steady ON: 100 Mbps Ethernet link
Blinking: Data transmission is in progress
Yellow Steady ON: 1000 Mbps Ethernet link
Blinking: Data transmission is in progress
Off Data
transmission speed at 10 Mbps or the
cable is not connected
Ethernet
(1000 Mbps)
(2500 Mbps)
LAN1
Green Steady ON: 1000 Mbps Ethernet link
Blinking: Data transmission is in progress
Yellow
Steady ON: 2500 Mbps Ethernet link
Blinking: Data transmission is in progress
OFF
Data transmission speed at 100/10 Mbps
or the cable is not connected
Serial
(TX/RX)
Green Tx: Serial port is transmitting data
Yellow Rx: Serial port is receiving data
OFF No operations

- 5 -
LED Name Status Function
Storage
Yellow
Data is being accessed from either the M.2
M key (PCIe [x4]) or the SATA drive
OFF
Data is not being accessed from the
storage drives
LAN Bypass
LED
(I/O board)
Yellow LAN bypass mode is activated
OFF No operations
Programmable
LED
(Main board*3)
Green Application active normally, blinking or
frequency adjustment
OFF No operations
Installing the V3200
The V3200 computer comes with 2 wall-mounting brackets. Attach the
brackets to the computer using 4 screws on each side. Ensure that the
mounting brackets are attached to the V3200 computer in the direction
shown in the following figure.
The 8 screws for the mounting brackets are included in the product
package. They are standard IMS_M3x5L screws and require a torque of
4.5 kgf-cm. Refer to the following illustration for details.
Use 2 screws (M3*5L standard is recommended) on each side to attach
the V3200 to a wall or cabinet. These 4 screws are not included in the
product package; they need to be purchased separately.

- 6 -
Ensure that the V3200 computer is installed in the direction shown in
the following figure:
Connecting the Power
The V3200 computers are provided with M12 power input connectors on
the front panel. Connect the power cord wires to the connectors and
then tighten the connectors. Push the power button; the Power LED
(on the power button) will light up to indicate that power is being
supplied to the computer. It should take about 30 to 60 seconds for the
operating system to complete the boot-up process.
Pin
Definition
1
V+
2
N.C.
3
V-
4
N.C.
The power input specification is given below:
•DC source with a power source rating of 24 V @ 4.0 A; 110 V @ 0.9
A, and a minimum of 18 AWG.
For surge protection, connect the grounding connector located beside
the power connector with the earth (ground) or a metal surface.
NOTE
This computer is designed to be supplied by listed equipment
(UL listed/ IEC 60950
-1/ IEC 62368-1) rated 24 to 110VDC,
mi
nimum 4 to 0.9 A, and minimum Tma=70˚C. If you need
assistance with purchasing a power adapter, contact the Moxa
technical support team.
Connecting Displays
The V3200 has 1 VGA interface that comes with a D-Sub 15-pin female
connector. In addition, another HDMI interface is also provided on the
front panel.
NOTE
In order to have highly reliable video streaming, use premium
HDMI-certified cables.

- 7 -
USB Ports
The V3200 comes with 2 USB 3.0 ports on the rear panel. The USB
ports can be used to connect to peripherals, such as keyboard, mouse,
or flash drives for expanding the system’s storage capacity.
Serial Ports
The V3200 comes with 2 software-selectable RS-232/422/485 serial
ports on the rear panel. The ports use DB9 male connectors.
Refer to the following table for the pin assignments:
Pin RS-232 RS-422
RS-485
(4-wire)
RS-485
(2-wire)
1
DCD
TxDA(-)
TxDA(-)
–
2
RxD
TxDB(+)
TxDB(+)
–
3
TxD
RxDB(+)
RxDB(+)
DataB(+)
4
DTR
RxDA(-)
RxDA(-)
DataA(-)
5
GND
GND
GND
GND
6
DSR
–
–
–
7
RTS
–
–
–
8
CTS
–
–
–
Ethernet Ports
The V3200 has 4 (V3200-TL-4L models) or 8 (V3200-TL-8L models)
1000 Mbps RJ45 Ethernet ports with M12 connectors on the front panel.
Refer to the following table for the pin assignments:
Pin
Definition
1
DA+
2
DA-
3
DB+
4
DB-
5
DD+
6
DD-
7
DC-
8
DC+
Digital Inputs/Digital Outputs
The V3200 comes with 2 digital inputs and 2 digital outputs in a
terminal block. Refer to the following figures for the pin definitions and
the current ratings.
Digital Inputs
Dry Contact
Logic 0: Short to
Ground
Logic 1: Open
Wet Contact
(
COM to DI)
Logic
0: 10 to 30
VDC
Logic 1: 0 to 3 VDC
Digital Outputs
Current Rating:
200 mA per
channel
Voltage:
24 to 30 VDC
For detailed wiring methods, refer to the V3200 Hardware User’s
Manual.

- 8 -
Installing SIM Cards
The V3200 Series comes
with 6 SIM card slots on
the rear panel of the
computer. Make sure you
insert the SIM card in the
right direction as
indicated on the label.
For detailed SIM card and wireless module installation, refer to the
V3200 Hardware User Manual.
Replacing the Battery
The V3200 comes with one slot for a battery, which is installed with a
lithium battery with 3V/200 mAh (Type: BR2032) specifications.
To replace the battery, do the following:
1. Locate the cover of the battery slot.
The battery slot is located on the front panel of the computer.
2. Unfasten the two screws on the battery cover.
3. Take off the cover; the battery is attached to the cover.
4. Separate the connector and remove the two screws on the metal
plate.
5. Replace the new battery in the battery holder, place the metal
plate on the battery, and fasten the two screws tightly.
6. Reconnect the connector, place the battery holder into the slot,
and secure the cover of the slot by fastening the two screws on
the cover.
NOTE
Be sure to use the correct type of battery. Incorrect battery
may cause system damage. Contact Moxa’s technical support
staff for assistance, if necessary.
CAUTION
Dispose of used batteries according to the instructions.