MQ Multiquip EC62PH5 Installation instructions

EC62PH5
Safety Instructions

EC-62S, 62P — PARTS & OPERATION MANUAL — REV. #1 (03/10/00) — PAGE 5
RULES FOR SAFE OPERATION & SAFETY DECALS
The safety instruction decal is P/N EM948501
SAFETY INSTRUCTIONS
1. Read owners manuals before operating.
2. Keep unauthorized and untrained people away from machine during operation.
3. Make sure all safety devices are in place before this machine is started.
4. Make sure engine is turned off and spark plug wire is disconnected before cleaning the
machine.
5. Keep hands and fingers away from moving objects.
6. Do not operate machine in an enclosed area. Proper ventilation is required.
7. Never leave machine unattended when operating.
8. Always stop engine and allow engine to cool before adding fuel or oil.
ESSICK CONCRETE PRODUCTS — A MULTIQUIP COMPANY — CARSON, CALIFORNIA
■ Do not operate or service this equipment
before reading the operating and maintenance
instructions manual or serious injury may
result.
■ Do not operate this equipment unless all
guards and safety devices are attached and
in place.
■ Stop the engine when leaving the
equipment.
■ Block the unit when leaving or when using
on a slope
■ Maintain this equipment in a safe operating
condition at all times.
■ Caution must be exercised while servicing
this equipment. Rotating and moving parts can
cause injury if contacted.
■ Stop the engine before servicing, adding
fuel and oil.
■ When towing, an adequate safety chain
must be fastened to the frame.
■ Keep all inexperienced and unauthorized
people away from the equipment at all times.
■ Unauthorized equipment modifications will
void all warranties.
■ Check all fasteners periodically for tightness.
Also check towing tongue bolt, lock nut and
wheel lug nuts for wear.
■ Wear safety glasses at all times when
working around machinery.
■ Stop the engine and disconnect the spark
plug before allowing anybody’s hands in the
mixing drum.
■ Never pour or spray water over the engine
or electric motor.
■ Tow only using safe speeds
■ Never operate the mixer in an enclosed
atmosphere or in a poorly ventilated area
The safety instruction decals shown must be on all Essick Mixers
Caution Decal is
P/N EM948423
CAUTION!
SHUT OFF ENGINE BEFORE
PUTTING HANDS IN MIXING DRUM