MSI CRYSTAL A410 - Crystal - A410 User manual

CrystalA410
G52-64731X1
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

ii
ThisdevicecomplieswithPart 15ofthe FCCRules.Operation issubject tothe
followingtwoconditions:
(1)thisdevicemaynotcauseharmful interference,and
(2)thisdevicemust acceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
CrystalA410
FCC-BRadio Frequency Interference Statement
Thisequipment hasbeen testedand
found tocomplywiththelimitsfora
class Bdigitaldevice,pursuantto
part15 of the FCCrules. Theselimits
aredesignedtoprovidereasonable
protectionagainstharmfulinterferencein aresidentialinstallation.Thisequipment
generates,usesand canradiateradiofrequencyenergyand,if notinstalled and
usedin accordancewiththeinstructionmanual,maycauseharmful interferenceto
radiocommunications.However,thereisno guaranteethatinterferencewill not
occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto
radio ortelevisionreception,whichcanbedeterminedbyturning theequipmentoff
andon, theuserisencouraged totrytocorrect theinterferencebyone ormoreof the
measureslistedbelow.
=Reorientorrelocatethe receiving antenna.
=Increasetheseparationbetweentheequipmentandreceiver.
=Connectheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.
=Consultthedealeroran experiencedradio/televisiontechnicianforhelp.
Notice1
Thechangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecould void theuser sauthoritytooperatetheequipment.
Notice2
Shielded interfacecablesandA.C.powercord,if any,mustbeusedin orderto
complywiththeemissionlimits.
VOIRLANOTICED INSTALLATIONAVANT DERACCORDERAURESEAU.
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

iii
Trademarks
All trademarksarethepropertiesof theirrespectiveowners.
Intel®andPentium®areregistered trademarks ofIntel Corporation.
PS/2andOS®/2areregistered trademarksofInternationalBusiness Machines
Corporation.
Windows®95/98/2000/NT/XP areregistered trademarks ofMicrosoft Corporation.
Netware®isaregistered trademarkof Novell,Inc.
Award®isaregisteredtrademarkof PhoenixTechnologiesLtd.
AMI®isaregisteredtrademarkofAmericanMegatrendsInc.
RevisionHistory
Revision Revision History Date
V1.0 Firstrelease July2007
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

iv
1. Alwaysread the safetyinstructions carefully.
2. KeepthisUser sManualfor futurereference.
3. Keepthisequipmentawayfromhumidity.
4. Laythisequipment onareliableflat surfacebeforesetting it up.
5. Theopeningsontheenclosurearefor air convectionhenceprotectsthe
equipmentfromoverheating.DONOTCOVERTHEOPENINGS.
6. Makesurethevoltage of thepowersourceand adjust properly115/230V
beforeconnecting theequipment tothe power inlet.
7. Placethe power cordsuchawaythat peoplecannot steponit. Donot
placeanythingover thepowercord.
8. AlwaysUnplug thePower Cordbeforeinserting any add-oncardor module.
9. All cautionsand warningsontheequipment shouldbenoted.
10. Never pourany liquidintotheopening that coulddamageorcauseelectrical
shock.
11. If any of the following situationsarises,get theequipmentcheckedby a
servicepersonnel:
- Thepower cordor plug isdamaged.
-Liquidhaspenetratedintotheequipment.
- Theequipment hasbeenexposedtomoisture.
- Theequipment hasnot workwell oryoucannot getit workaccording to
User sManual.
-The equipmenthasdroppedanddamaged.
- Theequipment hasobvioussign of breakage.
12. DONOTLEAVETHISEQUIPMENTINANENVIRONMENTUNCONDITIONED,
STORAGETEMPERATUREABOVE500 C(1220F),ITMAYDAMAGETHE
EQUIPMENT.
SafetyInstructions
CAUTION:Dangerofexplosionifbatteryisincorrectlyreplaced.
Replaceonlywiththesameorequivalenttyperecommendedbythe
manufacturer.
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

v
Warning:
1. For everychangesinpowercordˇ¦susage,pleaseuseanapprovedpower
cordwithconditiongreaterorequaltoH05VV-F,3G,0.75mm2.
2.Internalpart ishazardousmoving parts,pleasekeepfingersand other
bodypartsaway.
3.Forpluggableequipment,thesocket-outletshallbeinstallednearthe
equipmentand shall beeasilyaccessible.
4.Donot disabletheprotective earthpinfromthe plug,theequipment must
beconnectedtoanearthedmainssocket-outlet.
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

vi
WEEE Statement
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

vii
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

viii
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

ix
CONTENTS
FCC-BRadioFrequencyInterferenceStatement.......................................ii
Trademarks...........................................................................................................iii
RevisionHistory...................................................................................................iii
SafetyInstructions..............................................................................................iv
WEEE Statement....................................................................................................vi
Chapter1.GettingStarted................................................................................1-1
MainboardSpecifications....................................................................1-2
BareboneSpecifications.....................................................................1-3
OutlookIntroduction.............................................................................1-4
Chapter2.System Assembly..........................................................................2-1
Introduction...........................................................................................2-2
NecessaryTools..................................................................................2-2
ThePositionofthe KeyParts.............................................................2-3
InstallingtheMini-PCIEWLANCard(Optional)..................................2-5
Installing theFloppyDrive/ CardReaderModule.............................2-6
InstallingtheOpticalDriveModule......................................................2-9
Installingthe HardDiscDrive(HDD)Module.....................................2-11
Installingthe CPUandThermalKit......................................................2-13
InstallingtheMemoryModule..............................................................2-16
InstallingtheRearCover(DeskTopType).........................................2-17
Installing the RearCover(Wall MountType)(Optional)....................2-19
Chapter3.BIOSSetup.........................................................................................3-1
EnteringSetup.....................................................................................3-2
TheMainMenu.....................................................................................3-4
StandardCMOSFeatures...................................................................3-6
AdvancedBIOSFeatures...................................................................3-8
AdvancedChipsetFeatures...............................................................3-11
IntegratedPeripherals..........................................................................3-12
PowerManagementSetup..................................................................3-16
PNP/PCIConfigurations........................................................................3-19
PCHealthStatus..................................................................................3-20
LoadFail-Safe/OptimizedDefaults.....................................................3-21
SetSupervisor/UserPassword.........................................................3-22
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Getting Started
Chapter1
CongratulationsforpurchasingCrystal A410(MS-6473)
barebone. Midas bareboneisyourbestSlimPCchoice.
Withthefantasticappearanceandsmallformfactor,it
caneasilybesetanywhere.Thefeaturepacked plat-
formalsogivesyouanexcitingPCexperience.
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

MS-6473
1-2
MainboardSpecifications
ProcessorSupport
-Intel®Conroe, Conroe-LandCeleron (CederMill)@1066MHzFSB
in theLGA775 package
Chipset
-NorthBridge:ATI®RC410Mchipset
-SouthBridge:ATl®SB600chipset
MemorySupport
-DDR2533/667SDRAM(2GBMax)
-2DDR2DIMM slots
LAN
-SupportsEthernet LAN10/100/1000 byBroadcom®5787M
Audio
-AzaliaHDCodecbyRealtek®ALC262
-2-channelaudio
IDE
-SupportsUltraDMA66/100mode
LVDSSupport
-ATI®RC410MforSDVOtoLVDSdecoder
CardBus
-Richo®R5C486
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

1-3
Getting Started
BareboneSpecifications
LCDPanel
-17”TFT LCDpanel
Expansion Slot
-One mini-PCIEslotforWLANcard
SideI/O
-1PS/2mouseport
-1PS/2keyboardport
-4USB 2.0ports
-1LANjack
-3audiojacks(Line-in /Line-out/ MIC-in)
-1brightness adjustmentknob
BottomI/O
-1serialport
-1VGAport(D-sub15)
-1parallelport
PowerSupply
-180WattPSU
Speaker
-2internal speakerwith78dB+3dB@1.5W, 0.5M
Drive Bay
-1SlimODD,2.5”hidden
-1SlimFDD/ Cardreader
Dimension
-354mm(H)X410mm(W)X96mm(D)(withoutstand)
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

MS-6473
1-4
OutlookIntroduction
BrightenessAdjustmentKnob
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

1-5
Getting Started
Line-out
Line-in
MIC-in
USB2.0Ports
ParallelPort
ACInputConnector
SerialPort
VGAPort
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

MS-6473
1-6
PCMCIACardBusSlot
OpticalStorageDrive
CardReader/
SlimFloppyDrive
(Optional)
PS/2KeyboardConnector
PS/2MouseConnector
LAN Jack
USB2.0Ports
PowerSwitch
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

2-1
SystemAssembly
Thischapterprovidesyouwiththeinformationabout
systemassemblyprocedures. Whiledoing the installation,
becarefulinholdingthecomponentsandfollowthe
installationprocedures.
Useagrounded wriststrapbeforehandling computer
components.Staticelectricitymaydamage the
components.
Chapter2
SystemAssembly
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

MS-6473
2-2
Introduction
NecessaryTools
Cross typescrewdriver,canbeusedtodomostofthe
installation.Chooseonewithamagneticheadwouldbe
better.
Pliers,canbe usedasanauxiliarytooltoconnectsome
connectorsorcables.
Forceps, canbe used topickuptinyscrewsorsetup the
jumpers.
Rubbergloves,canpreventyourself frombeing incisedand
suffering thestaticcharge.
Thebuilt-in mainboardisdesignedforMS-6422only.Exceptthe mainboard,the
built-in componentsofthe barebone includepowersupply.Inthischapterwe llshow
youhowtoinstallCPUandthermal kit,mini-PCIcard,cardreader, floppydrive, HDD,
opticaldriveandmemorymodule.
Electricscrewdriver,canbeusedtolockthestand.
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

2-3
SystemAssembly
ThePositionoftheKeyParts
CPUand ThermalKitArea
OpticalDriveArea
FloppyDrive/
CardReader/
MiniPCICard
Area
MemoryModule Area HardDisc DriveArea
1
2
3
4
5
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

MS-6473
2-4
Takeapartallthementalcoversand traysinorder,youwill seethelayoutasthe
picturebelow.
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com